ED Building Services

Planning and feasibility, design and permits, structural and exterior changes, rough in work(electrics,framing,plumbing,hvac), insilation and drywall, interior finishing up, furnishing

Determining if your loft is suitable for conversion involves assessing the structural, spatial, and regulatory conditions of the space.
Assessong head height and space, roof structure, inspect access points, consult an architect.

Determining if your loft is suitable for conversion involves assessing the structural, spatial, and regulatory conditions of the space.

? 1. Feasibility & Initial Assessment
Measure head height (minimum ~2.2m required).
Inspect roof structure (cut roof = easier, trussed roof = more complex).
Evaluate access for a staircase.
Consider usage: Bedroom, office, ensuite, etc.
Consult professionals (architect, loft conversion specialist, or builder).
? 2. Design & Planning
Architectural drawings created based on space and use.
Decide on type of conversion:
Roof light / Velux (no structural changes)
Dormer (adds floor space/headroom)
Hip-to-gable (extends gable wall)
Mansard (major structural change)
Submit for planning permission (if required).
Apply for building regulations approval.
? 3. Budgeting & Contractor Selection
Get quotes from several contractors.
Decide on DIY, project-managed, or full design-and-build route.
Confirm timeline, cost, and contract terms.
?️ 4. Structural & Preliminary Works
Scaffold setup for external access.
Reinforce or replace floor joists (existing ceiling joists usually insufficient).
Steel beams or supports installed if needed.
First fix plumbing/electrics laid out (if bathroom or electrics are added).
? 5. Roof and Exterior Alterations
Dormer or gable build (if applicable).
Install roof windows or skylights.
Insulate roof and walls to meet energy regulations.
Tiling and weatherproofing of the roof completed.
? 6. Interior Construction
Staircase installation from lower floor.
Partition walls built (if adding a bathroom or dividing space).
First fix continued (wiring, pipework, ventilation systems).
? 7. Insulation, Plastering & Second Fix
Final insulation in walls, ceiling, and possibly floors.
Plasterboarding and skimming the interior walls and ceilings.
Second fix electrics, plumbing, and carpentry (sockets, switches, radiators, doors).
? 8. Finishing Touches
Paint and decorate walls and ceilings.
Flooring installation (carpet, wood, etc.).
Install fixtures and fittings (lights, shelves, furniture).
✅ 9. Final Inspection & Certification
Building control final inspection to ensure compliance with regulations.
Receive completion certificate.
Update your property records and insurance (optional but recommended).
?️ 10. Furnishing & Use
Add furniture, storage, and décor.
Begin using the space as a bedroom, office, etc.

Have been in the building line of work for 5-6 years since 17

My work comes with a garuantee of high top of the range quality at a reasonable price