Find a Pressure Washing Contractor near you
The average rating for Bark Pressure Washing Contractors is 4.85, based on 7,533 reviews
5/5
based on 7,533 reviews
Looking to clean the outside of your home or business? Read our handy guide to find out how much your pressing washing team will charge for their services.
You may have noticed that over time the outside of your property has accumulated a lot of dirt. Everything from pollution, algae, mud and even graffiti can soon bring down the look of the neighbourhood, let alone your property.
But when it comes to cleaning surfaces such as pavers or walls, in particular, it’s often impossible to remove the dirt using traditional methods alone. This is where pressure washing is extremely useful, as not only does it make light work of the most stubborn stains, it can be completed in no time at all.
As the name suggests, pressure washing involves using water that is delivered at high pressure, so that the force is enough to lift the dirt off. Pressure washing is suitable for a variety of surfaces including driveways, garage floors, concrete patios, tiled patios, fencing, decking, pool areas, outdoor furniture, BBQs, boats, cars, trailers and more.
Pressure washing is carried out using specialist equipment that is connected to a water supply. Using concentrated movements, pressure washing will instantly remove all of the debris from the surface, leaving it looking as good as new.
The cost of pressure washing varies between $1.50 and $5 per square meter across Australia. Typically, the price falls towards the lower range of this estimate, though a premium will be charged for smaller jobs.
To price your job up, your contractor will measure the area that needs pressure washing. Or, they may give you a fixed fee for items such as fencing, boats, furniture etc.
| Average cost (per sqm) | $2 |
| Minimum cost (per sqm) | $1.50 |
| Maximum cost (per sqm) | $5 |
When it comes to driveways specifically, there are some wider variations in price. Basic pressure washing can still be found between $1.50 and $5 per sqm. However, if you wish to accompany a driveway clean with weed removal, expect to pay a little more.
The cost of pressure washing varies depending on several factors, including:
Type of item
Size of area
Type of pressure
Time
Location
In general, pressure washing costs between $50 and $450 depending on the scope of the job. Though the type of item you wish to have pressure washed will also affect the price.
One of the most common jobs is driveway cleaning. The cost averages between $150 and $325 for extremely large driveways. The good news is that this service doesn’t have to be done too regularly, and will make your driveway look as good as new, which is far cheaper than replacing it.
On the cheaper end of the scale, you can have your BBQ pressure washed for as little as $75. This will safely remove all of the grease, leaving it hygienically clean.
| Type of cleaning | Highest average price | Lowest average price |
| BBQ | $145 | $75 |
| Decking (inc oil and seal) | $375 | $280 |
| Driveway | $325 | $150 |
| External Walls | $450 | $250 |
| Graffiti | $100 | $100 |
If you are not looking to have a specific item pressure washed (such as a car, boat, BBQ etc) then the area size is going to be the biggest aspect affecting the total cost.
Your contractor will need to know the measurement of the area. They will visit your property to ascertain this. The area size will be multiplied by the cost per square foot, which will give you the total cost before any add-on services if applicable.
Pressure washing can also include soft pressure washing, which is used on surfaces that are not suitable for more intense pressure, such as wood, metal and asphalt.
There may be a price variation between pressure washing and soft washing, with soft washing being slightly cheaper.
However, soft washing and pressure washing are two different services. The treatment which is appropriate for your material depends on what it’s made from. So be sure to ask your contractor for their recommendations.
Time can be a factor that affects the price for more detail orientated jobs such as gutter cleaning, especially if your gutters are heavily blocked. Or, if any of your materials also require repair work in addition to cleaning.
The average pressure washing job takes between 30 minutes and 2 hours, depending on the scope of the job.
Pressure washing companies have different operational costs, depending on where they are based in Australia. The level of competition in your area may also affect the cost, with remote areas seeing higher prices, versus more competitive areas with lots of pressure washing companies.
In Australia, it’s common to find larger square areas coming in much cheaper than smaller areas. So, you might want to consider adding more aspects to the job to make it better value overall, versus a small patch of concrete.
Based on a 100 sqm job, Perth is typically the cheapest place at $200. The most expensive place is Sydney, at $325 on average. Prices are before GST.
| Location | Average pressure washing cost |
| Melbourne | $300 |
| Sydney | $325 |
| Adelaide | $270 |
| Brisbane | $250 |
| Perth | $200 |
The true cost will depend on the type of item you are having pressure washed, as well as the size of the area. Discretionary costs may also be added where additional services are required, or if your driveway doesn’t mean the minimum size requirements.
In a word, yes! Pressure washing involves very little effort yet produces superior results. Plus, the majority of regular cleaning products aren’t suitable for cleaning outdoor materials anyway, especially driveways. This makes it impossible to get the level of clean you need without the right tools and equipment. Pressure washing literally removes all of the hassle and fuss, while giving you the best possible finish.
Find the best professional for the job on Bark today.
The average rating for Bark Pressure Washing Contractors is 4.85, based on 7,533 reviews
5/5
based on 7,533 reviews
