Summit Air Conditioning

There are a number of air conditioning types that can be described as ‘split’. Split air conditioners consist of outer and inner components which are connected by an electric cable and two copper pipes along which the refrigerant flows to and from the internal and external components. The noisiest and bulkiest part of the air conditioner which contains the compressor is outside whilst the internal component is much lighter and quieter and can be placed (depending in the design), in almost any part of the inside air space.

Modern split air conditioning systems are equipped with remote control, and usually are equipped with a heat pump facility for heating in the winter months. The combination of sophisticated controls and a heat pump means that the internal air spaces can effectively be ‘climate controlled’ by modern split air conditioning systems keeping the room temperature to within 1-2 degrees of the temperature setting. Most split air conditioning systems now have a number of control modes and timers so that the operation of the unit can be pre programmed in considerable detail. Even the direction and swing operation of the discharge louvers can usually be set. On the indoor component there is always a coarse air filter to protect the coils from large particles and often there are also fine filters and air purification equipment built in to remove fine dust, tobacco smoke, plant pollen, odours and chemical pollutants, etc.

At Summit Air Conditioning we pride our selves on keeping your system fit and healthy. Our engineers are fully trained and have a wealth of knowledge in this area. Service and maintenance is of upmost importance when it comes to keeping your systems running efficiently and effectively for many years.

Air conditioning filters, coils, and fans need regular maintenance for the unit to function effectively and efficiently throughout its years of service. Not having regular maintenance will result in a steady decline in air conditioning performance, while energy costs will steadily increase.

Air Conditioning Filters:
The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean the system's filters. Clogged, dirty filters block normal airflow and reduce a system's efficiency significantly. Replacing a dirty, clogged filter with a clean one can lower your air conditioning system's energy consumption by between 5% and 15%.

Some types of filters are reusable; others must be replaced. They require cleaning or replacing at least twice a year. Filters may need more frequent attention if the air conditioning system is in constant use, it's subjected to dusty conditions, or you have fur-bearing pets in the house.

Air Conditioner Coils:
The air conditioner's evaporator coil and condenser coil collect dirt over time. A clean filter prevents the evaporator coil from soiling quickly. In time, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, you need your evaporator coil cleaned.

Outdoor condenser coils can also become very dirty if the outdoor environment is dusty, maybe near a busy road or if there is loose debris nearby.

Condensate Drains:
A clogged drain or pump channel will prevent a unit from reducing humidity and the resulting excess water may backfill into the system's drip tray and cause water to leak out of the system. This could potentially discolour walls, carpet or even worse fall onto electrical items.

Hiring a Professional:
When your air conditioning system needs regular maintenance you can contact Summit Air Conditioning and let our highly trained engineers work to keep you, your employees, your family and the environment healthy.

The Engineer will:
-Check the correct amount of refrigerant is in your system
-Test for refrigerant leaks using a leak detector
-Capture any refrigerant gas that must be evacuated from the system, instead of illegally releasing it to the atmosphere
-Measure airflow through the evaporator coil
-Inspect electric terminals, clean and tighten connections
-Check the accuracy of the thermostat
-Clean or replace filters
-Clean indoor and outdoor coils and fans

Six Steps to getting your Air Conditioning installed

1. We will come to the site free of charge, if required, to measure up and design the system installation you require.
2. We will provide a detailed quote based on the air conditioning system you will need.
3. On acceptance of your quote, we will order systems and materials for you.
4. We will agree access and start work at the agreed time to suit you.
5. If required, we can dispose of your old units for you at the end of the process.
6. Our after care team will get in touch with you to check you are satisfied with the completed work and discuss maintenance and service options we offer.