PPS Heating and plumbing services

About

Our Services

Combi Boiler Replacment

An existing combi boiler replacement is normally straight forward as in most cases as the boiler is going into the same location. Installation normally required a new wireless programmer and room stat. Installations of this type are normally complete in one day.

Conventional Gravity System to Combi Swap

This is becoming one of our most popular installations as switching from a conventional system to a combi boiler can save you up to 40% on your gas bill. Installation requires removal of the hot water tank and all header tanks, we then create a sealed system. The benefits of this process are i) increased hot water pressure and ii) increased speed of the heating system, and iii) hot water on demand. With this type of installation, we normally assign a two man team and aim to complete the process within two days. All electrical work is also included.

Conventional System Boiler Swap

This is generally replacing the existing boiler in the same location. These boilers are known in the trade as heat only boilers, athough they do control the hot water as well as the heating. This boiler installation retains the existing cylinder and the header tanks. Installation guidelines are the same as the Combi Boiler Installation but additional work is required for wiring pump over-rum. We often recommend upgrading the existing Y plan or S plan. This installation also requires electrical work for a pump overrun (this is an industry requirement).

Pressurised Systems

Ideal for larger houses with a large hot water demand. Installation guidelines are the same as a Convensional System Swap. Due to a pump and expansion chamber within the system boiler we will remove the central heating header tank.



Other Services
◾Full central heating upgrades
◾Radiator replacement
◾Boiler servicing
◾Boiler Repair
◾New programmers supplied and fitted
◾Thermastatic radiator valves supplied and fitted

Show more