Nuvo Project

1. Planning and Design;
Determine the purpose of the converted space: Whether it's going to be a bedroom, home office, gym, or any other specific function.
Consider the layout and design: Think about the placement of walls, windows, doors, electrical outlets, plumbing (if required), and any other structural changes.
2. Clearing and Preparation:
Remove all items from the garage: Clear out any vehicles, storage items, or other belongings from the garage.
Evaluate the condition of the garage: Inspect the structure for any damage, such as water leaks, cracks, or foundation issues. Repair or address these problems as needed.
Determine the level of insulation: Decide whether you need to insulate the walls, ceiling, and floor to make the space more comfortable.
3. Structural Changes:
Framing: Add or modify walls, doorways, and windows according to the design plan. Ensure proper support for load-bearing walls if required.
4.Electrical and Plumbing: Install or modify electrical wiring, outlets, switches, and lighting fixtures. If plumbing is necessary, plan and install water supply lines and drainage pipes.
5.Insulation and Walls/Ceilings:
Insulation: Install insulation materials such as fiberglass batts, spray foam, or rigid foam boards in the walls, ceiling, and floor to improve energy efficiency and regulate temperature.
Walls & Ceilings: Build brick walls and plaster(if needed) and ceiling, ensuring a smooth and finished appearance.
6.Flooring and Finishes:
Choose flooring: Select appropriate flooring materials based on the room's purpose and your personal preferences. Options include hardwood, laminate, carpet, tile, or vinyl.
Install flooring: Lay the chosen flooring material according to the manufacturer's instructions.
Finishings: Complete any additional finishes, such as baseboards, crown molding, trim work, and paint or wallpaper application.
7.Utility Connections:
Electrical and Lighting: Install light fixtures, switches, and outlets. Connect the electrical system to the main electrical panel.
Plumbing fixtures: If you have added plumbing, connect the sink, toilet, shower, or any other required fixtures to the existing water supply and drainage system.

1. Headroom: Check the available headroom in the loft space. The minimum recommended height to ensure sufficient clearance.
2. Floor Area: Consider the floor area of the loft. An ideal loft conversion should have sufficient space to accommodate the intended use, such as a bedroom, office, or living area. Measure the width and length of the loft to determine if it provides the desired floor area.
3. Roof Structure: Examine the roof structure to assess its suitability for conversion. Traditional rafter-and-purlin roofs are often easier to convert compared to modern trussed roofs, which may require additional structural modifications. We would need to consult a structural engineer or architect to evaluate the roof's load-bearing capacity.
4. Access: Evaluate the access to the loft space. Determine if there is enough room for a staircase that meets building regulations. Ideally, there should be a suitable location for the staircase that doesn't significantly impact the existing living space.
5. Natural Light: Assess the availability of natural light in the loft. Adequate daylight is crucial for a comfortable living space. Consider the placement of windows, dormers, or skylights to ensure sufficient illumination and ventilation.
5. Utilities and Services: Evaluate the feasibility of providing essential utilities such as electricity, plumbing, and heating to the loft space. Determine if the existing systems can be extended or if new installations will be required.
Budget: Consider your budget for the loft conversion.

1. Feasibility Study and Design:
Assess the loft space's suitability for conversion, considering factors like headroom, floor area, roof structure, and access.
Consult with an architect or loft conversion specialist to develop a feasible design that meets your requirements and complies with building regulations.
Discuss the design options, such as the type of conversion (e.g., dormer, hip-to-gable, mansard), positioning of windows, and layout considerations.
2. Planning Permission and Building Regulations:
Determine if planning permission is required for your loft conversion. In some cases, loft conversions fall under permitted development rights, but certain limitations apply.
Apply for planning permission if necessary or seek a Certificate of Lawfulness from the local planning authority.
Ensure compliance with building regulations, covering areas such as fire safety, insulation, structural stability, and means of escape.
3. Structural Calculations and Detailed Drawings:
Engage a structural engineer to carry out calculations and assessments of the existing structure and any required modifications.
Develop detailed architectural drawings, including floor plans, elevations, sections, and construction details. These drawings will be used during construction and for obtaining quotes from builders.
4. Pre-construction Preparations:
Notify your neighbors about the upcoming construction work if required by local regulations.
Arrange for necessary permits, scaffolding, skip hire, and storage solutions.
Establish a project timeline and coordinate with the contractor to set start and completion dates.
5. Construction:
Begin construction by setting up scaffolding, protecting the existing areas of the house, and preparing the loft space.
Carry out structural works, such as installing steel beams if needed, reinforcing the floor, and modifying roof structure.
Construct dormers, install windows, and create openings for staircases and access.
Complete plumbing, electrical wiring, insulation, and heating installations.
Fit internal walls, ceilings, and flooring. Finish with plastering, painting, and other decorative elements.
Install fixtures, fittings, and joinery, including doors, skirting boards, and built-in storage.
7. Completion and Final Touches:
Conduct a final inspection with the contractor and relevant authorities to ensure compliance with building regulations and safety standards.
Obtain completion certificates, including a Building Control Completion Certificate.

Nuvo Project has been in business since 2014, doing mostly subcontracting jobs and small jobs.

We are registered with the NHBRC, therefore as a watchdog, the NHBRC intervenes to resolve any challenges in the best interest of all parties, especially consumers. To get protection from the Council, your builder needs to register your home with the NHBRC before any building starts, and you will have to pay a fee that is a percentage of the value of your home. This fee buys a 5-year warranty against any potential construction defects – once you have moved into the new house, and discover any structural defects within those 5 years, you can claim against the warranty to have the home repaired.

By doing this, you’re assured of an accredited builder whose skills and credentials have been evaluated. NHBRC protection doesn’t end here. During construction, an inspector accredited by the Council must make at least 4 visits to the construction site to check on the workmanship of the project and resolve any problems promptly.

Using only NHBRC-accredited builders who register your new home with the Council makes perfect sense in terms of consumer protection. Even if this wasn’t a requirement when applying for a building loan, it would be the smart move anyway.

1. Creativity and Problem Solving: I often encounter unique challenges and problems on each project. I get to use my creativity and problem-solving skills to find innovative solutions and overcome obstacles.
2. Tangible Results: I really can take pride in my work because I can physically see the results of my efforts. Constructing a building or renovating a space provides a tangible outcome that can be appreciated and admired.
3. Collaborative Work: I often work with a team of professionals, including architects, engineers, subcontractors, and clients. This collaborative environment allows for the exchange of ideas and knowledge, fostering a sense of teamwork.
4. Variety in Projects: I get to have the opportunity to work on a wide range of projects, from residential homes to commercial buildings. This variety keeps the work interesting and allows me to continually learn and grow in their profession.
5. Building Relationships: As a Contractor often interact with different clients and stakeholders throughout their projects. Developing positive relationships with clients and seeing their satisfaction with the finished product can be rewarding to me.

1. Passion for Construction: I enjoy the process of construction, the satisfaction of seeing a project come to life, and the opportunity to contribute to the built environment.
2. Entrepreneurial Spirit: Starting a construction company allowed me to take charge of my careers and make independent decisions.
3. Desire for Quality and Customer Focus: I felt that I can offer a higher level of quality, craftsmanship, and customer service than what is currently available in the market. I was inspired to start a construction company that prioritizes delivering exceptional results and building strong relationships with clients.

1. Communication and Collaboration: Effective communication and collaboration are essential for a successful contractor-client relationship. We are a company that actively listens, understand our clients needs, and maintain open lines of communication throughout the project.
2. Transparency and Integrity: We are transparent in their pricing, contracts, and project timelines. We believe that integrity, honesty, and a commitment to ethical business practices can build trust between the contractor and client.
3. Client-Centric Approach: Finally, we are a contractor who prioritize their needs and goals, provide personalized solutions, and deliver exceptional customer service. A client-centric approach that focuses on client satisfaction can set us apart from competitors.

We can provide services online and remotely. Depending on what the job entails, we do have some services that may not require our presence onsite, and we also have services that may require us to be onsite.

1. Virtual Meetings and Communication
2. Enhanced Cleaning and Sanitization: Implement enhanced cleaning and sanitization practices for common areas, tools, equipment, and high-touch surfaces. Regularly disinfect commonly used items and surfaces to reduce the risk of virus transmission.
3. Limit Site Access: Control access to the construction site by implementing visitor registration, limiting the number of people on-site, and establishing designated entry and exit points.
4. Implement Health and Safety Policies: Develop and communicate clear health and safety policies that align with local health guidelines. These policies may include requirements for social distancing, wearing masks, and regular sanitization practices.
5. Conduct Health Screenings: Implement health screening protocols for all employees, subcontractors, and visitors entering the construction site. This may involve temperature checks, symptom questionnaires, and adherence to specific protocols for individuals who show signs of illness.