Olamoyegun - Instrumentation And Control Engineer - Oshogbo, Osun, Nigeria

Oluwakayode Olamoyegun

Oshogbo, Osun, Nigeria

Services

Instrumentation And Control Engineer

Summary:

Oluwakayode is an Instrumentation and Controls Engineer currently practicing in the Oil and Gas industry.He has an excellence driven life and is consistently dedicated to ensuring success in all he does.

Work History

Instrumentation and Control Engineer

Homble Energy Services Limited

From May 2012

Knowledgeable about reading and interpreting P& IDs for Instrumentation purposes

Involved in Instrumentation and Control input into P&ID, providing necessary advice to the Process team and tagging Instruments on P&ID according to ISA 5.1 recommendations.

Preparation of Instrument Cable schedules, Junction Box Drawings, Instrument Cable route layouts and Instrument cable calculations.

Highly Proficient in the use of AutoCAD and Aveva PDMS software, for 3D modeling of equipment, Cabling system and Cable trays.

Preparation of Fire Detector Layout Drawings and specification of fire detector systems for Oil and gas facilities.

Preparation of Instrument Index and I/O lists.

Preparation of instrument layout drawings.

Preparation of instrument loop diagrams, Instrument Block Diagrams and Instrument Logic Diagrams.

Preparation of Instrument Datasheets for various instruments in accordance with applicable standards like ISA 20.


Preparation of Instrument MTOs and Hook-up Details for various instruments where required according to client's Design Instruction Manual (DIM), go-by (where applicable), specifications and standards.

Preparation of Bill of Materials for each installation through vendor catalogues, internet according to client's approved vendor list

Knowledge of general standards for control valves, orifice, SIL standards, field instrument installation E.g. ISA, API, IEC and NFPA

Knowledgeable in specification and sizing of control valves and Pressure-Vacuum Relief Valves.

Knowledgeable about Fieldbus standards like Fieldbus, MODBUS, Profibus etc

Instrumentation and Control Engineer

Homble Energy Services Limited

May 2012 - May 2012

Knowledgeable about reading and interpreting P& IDs for Instrumentation purposes

Involved in Instrumentation and Control input into P&ID, providing necessary advice to the Process team and tagging Instruments on P&ID according to ISA 5.1 recommendations.

Preparation of Instrument Cable schedules, Junction Box Drawings, Instrument Cable route layouts and Instrument cable calculations.

Highly Proficient in the use of AutoCAD and Aveva PDMS software, for 3D modeling of equipment, Cabling system and Cable trays.

Preparation of Fire Detector Layout Drawings and specification of fire detector systems for Oil and gas facilities.

Preparation of Instrument Index and I/O lists.

Preparation of instrument layout drawings.

Preparation of instrument loop diagrams, Instrument Block Diagrams and Instrument Logic Diagrams.

Preparation of Instrument Datasheets for various instruments in accordance with applicable standards like ISA 20.


Preparation of Instrument MTOs and Hook-up Details for various instruments where required according to client's Design Instruction Manual (DIM), go-by (where applicable), specifications and standards.

Preparation of Bill of Materials for each installation through vendor catalogues, internet according to client's approved vendor list

Knowledge of general standards for control valves, orifice, SIL standards, field instrument installation E.g. ISA, API, IEC and NFPA

Knowledgeable in specification and sizing of control valves and Pressure-Vacuum Relief Valves.

Knowledgeable about Fieldbus standards like Fieldbus, MODBUS, Profibus etc

Telecommunications Transmission Engineer

Huawei Technologies Limited (Airtel Managed Service Project)

June 2011 - June 2012

• Provide surveillance and first level support for the Transmission network by managing the Tellabs DXX 6300 nodes on the network and also all the SDH radio links (NSN, Ceragon and Harris-Aviat radios)
• Troubleshooting the transmission network with various tools in Tellabs 8000 Network manager like Tellabs Router, Tellabs Network editor, Web reporter, etc., also Netboss (for Harris Megastar and Microstar radios), Pro Vision Client (for Truepoint 6500 radios),Netmaster (for Ceragon radios) and Netviewer (for NSN radios),U2000 (Huawei RTN radios) on the SDH radio links.
• Escalation and notification of critical and major outages to relevant parties.
• Monitor alarms and performance information to identify faults or degradation.
• Provide initial analysis by troubleshooting transmission links and circuits to localise issues and restore if possible.
• Perform Fault Management by coordinating support resources, managing technical escalation to ensure fault is rectified within KPI.
• Create and update network trouble tickets.
• Good knowledge of Transmission media technologies like Microwave, SDH technology and DXX (Multiplexers).

Telecommunications Transmission Engineer

Huawei Technologies Limited (Airtel Managed Service Project)

May 2011 - May 2012

• Provide surveillance and first level support for the Transmission network by managing the Tellabs DXX 6300 nodes on the network and also all the SDH radio links (NSN, Ceragon and Harris-Aviat radios)
• Troubleshooting the transmission network with various tools in Tellabs 8000 Network manager like Tellabs Router, Tellabs Network editor, Web reporter, etc., also Netboss (for Harris Megastar and Microstar radios), Pro Vision Client (for Truepoint 6500 radios),Netmaster (for Ceragon radios) and Netviewer (for NSN radios),U2000 (Huawei RTN radios) on the SDH radio links.
• Escalation and notification of critical and major outages to relevant parties.
• Monitor alarms and performance information to identify faults or degradation.
• Provide initial analysis by troubleshooting transmission links and circuits to localise issues and restore if possible.
• Perform Fault Management by coordinating support resources, managing technical escalation to ensure fault is rectified within KPI.
• Create and update network trouble tickets.
• Good knowledge of Transmission media technologies like Microwave, SDH technology and DXX (Multiplexers).

Transmission Engineer

Huawei Technologies Limited (Airtel MS Project)

May 2011 - May 2012

• Provide surveillance and first level support for the Transmission network by managing the Tellabs DXX 6300 nodes on the network and also all the SDH radio links (NSN, Ceragon and Harris-Aviat radios)
• Troubleshooting the transmission network with various tools in Tellabs 8000 Network manager like Tellabs Router, Tellabs Network editor, Web reporter, etc., also Netboss (for Harris Megastar and Microstar radios), Pro Vision Client (for Truepoint 6500 radios),Netmaster (for Ceragon radios) and Netviewer (for NSN radios),U2000 (Huawei RTN radios) on the SDH radio links.
• Escalation and notification of critical and major outages to relevant parties.
• Monitor alarms and performance information to identify faults or degradation.
• Provide initial analysis by troubleshooting transmission links and circuits to localise issues and restore if possible.
• Perform Fault Management by coordinating support resources, managing technical escalation to ensure fault is rectified within KPI.
• Create and update network trouble tickets.
• Good knowledge of Transmission media technologies like Microwave, SDH technology and DXX (Multiplexers).

Qualifications & Certifications

Bachelor of Science(Bsc) in Electronics/Electrical Engineering

Obafemi Awolowo University,Ile-Ife

Igbobi College,Yaba

Bachelor of Science (BSc)

Obafemi Awolowo University

Igbobi College Yaba,Lagos

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?