Ladera - Electronics Technician - Jeddah, Makkah Province, Saudi Arabia

Nestor Ladera

Jeddah, Makkah Province, Saudi Arabia

Services

Electronics Technician

Summary:

Maintain electrical / electronics calibration laboratory’s prime working standards and auxiliary equipment; make inter-comparison of working standards to ascertain their working conditions prior to submission to the reference standards laboratory for second echelon calibration and certification.
Repair, overhaul, modify, adjust, test, calibrate and certify precision measuring equipment such as oscilloscope, signal generators, voltmeter, ohmmeters, ammeters, spectrum analyzers and other related electronic equipment.
Perform relative measurement and/or test on other electronics instrument for factor such as standing wave ratio, insertion loss, RF power output, discontinuity and sensitivity. Perform calibration and incidental repairs on passive semiconductor instruments such as attenuators, directional couplers, slotted lines, filters, isolators, etc.
Familiar with Fluke, Hewlett Packard, Tektronix, Systron-Donner, Boonton, Wavetek and Gigantronics test instruments.

Work History

Instrumentation & Calibration Technician

From March 2012

Calibration and Instrumentation Job Description:
Instrumentation and Calibration of units such as; Pressure Gauges, Pressure Recorder, Relief Valves, Flow Indicator Transmitter (FIT), Flow Transmitter (FT), Pressure Indicator Transmitter (PIT), Pressure Deferential Indicator Transmitter (PDIT). Calibration and Validation of welding machine such as; Miller, Lincoln, Rhino, Kemppi Arc Welding Machine, Dry Rod Oven.
Instrumentation and Calibration of 3rd party company on-site and gulf plant such as; Saudi Aramco, Saudi Binladen Group, Siemens Company, Ma'aden Gold Company, Makana Company, Dayem Punjh Lloyd Company.
Maintenance to facility instrumentation and controls equipment, systems and components.
Experience with first, last, and in process inspection.
Performs Corrective and Preventive I & C Maintenance tasks. Utilizes/Interprets blueprints, drawings and specifications in locating and diagnosing trouble in electrical/electronics/instrumentation equipment, control circuits and power systems.
Performs emergency repairs to systems, equipment and components. Records the as-found condition as well as the repaired condition.
Demonstrates and conducts any required inspections/post-maintenance testing of systems, equipment and components as necessary to complete work packages and ensures systems, equipment and components are returned to operational conditions.
Assists vendors in performing I & C maintenance tasks that are beyond the ANCDF maintenance department's capability. Provides technical support for this work.
Specifies maintenance equipment needs to complete I & C tasks.
Calibrates and maintains instruments and control systems, replaces worn, damaged or failed equipment and components in support of facility operations.
Maintains accountability of property, including tools and maintenance equipment.
Serves as a member of the Emergency Response Team.
Performs Preventive Maintenance tasks, following predetermined checklists in the performance of preventive...

Instrumentation & Calibration Technician

King Khalid International Airport / Saudi Oger Ltd

November 2006 - February 2012

P.O. Box 12702 Riyadh, 11483 K.S.A

Position Title: Instrumentation & Calibration Technician
November 2006 to February 2012

Calibration and instrumentation Job Description:

Repair and calibrate miscellaneous electrical and electronic test equipment. Calibration of test equipment are performed using standards that are directly/indirectly traceable to the U.S. National Institute of Standards and Technology or to the National Physical Laboratory (U.K.) with the limitations of their calibration services or have been derived by ratio or from accepted values of natural physical constants. Calibration is performed in strict compliance with MIL-STD 45662A meeting all documentation requirement of ISO/IEC 17025.
Responsible in test, calibrate, maintain and repair of electrical, mechanical, electromechanical, electronic and analytical measuring, indicating and recording equipment to ensure conformance to established guidelines. Interpret data and other information in order to complete calibration procedures. Familiar with various measurement units, such as, meters, kilograms, seconds, amperes, Kelvin's, candelas, moles, ohms, Pascal's and hertz, according of required engineering specification, including spanning, linearization and zeroing.
Repair & bench calibration of pressure indicators, pressure transmitters, temperature gauge, temperature transmitters, temperature controllers, flow indicators, flow transmitters, level indicator, level transmitters, pressure relief valves, control valves, pre-commissioning of transformer, circuit breakers, and other electrical devices. Calibration of pressure recorders, temperature recorders, pressure loggers and temperature loggers. Calibration & Validations of welding machines, electrode ovens, electrode baking ovens, electrode main baking ovens. Perform on-site calibration, verification, simulation test and loop checks of all instrumentation and controls, prior to commissioning. Performed Preventive Maintenance of all...

Calibration and Instrumentation Technician

Dammam

-Khobar Highway, Al-khobar
P.O.Box 12290, Dammam 31473 K.S.A
MSC LAB: Ahmed Bin Hanbal St. Cross 15
Tel. No.: (03) 857-3117 / 857-8861

Calibration Technician

Fax No

858-9592

Process Product Technician

VISHAY

November 1996 - September 2006

November 1996 - September 2006

Job Description:
Maintain electrical / electronics calibration laboratory's prime working standards and auxiliary equipment; make inter-comparison of working standards to ascertain their working conditions prior to submission to the reference standards laboratory for second echelon calibration and certification.
Repair, overhaul, modify, adjust, test, calibrate and certify precision measuring equipment such as oscilloscope, signal generators, voltmeter, ohmmeters, ammeters, spectrum analyzers and other related electronic equipment.
Perform relative measurement and/or test on other electronics instrument for factor such as standing wave ratio, insertion loss, RF power output, discontinuity and sensitivity. Perform calibration and incidental repairs on passive semiconductor instruments such as attenuators, directional couplers, slotted lines, filters, isolators, etc.
Familiar with Fluke, Hewlett Packard, Tektronix, Systron-Donner, Boonton, Wavetek and Gigantronics test instruments.

Qualifications & Certifications

Asian Colleges of Science and Technology

(SPIS) Second Philippines International School

Instrumentation & Controllers Training

(ACSAT) Asian College of Science and Technology

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Are you sure that you want to leave?