Milosevic - Shift Supervisor - Pančevo, Vojvodina, Serbia

Nebojsa Milosevic

Pančevo, Vojvodina, Serbia

Services

Shift Supervisor

Work History

Shift supervisor

MHC-DHT

on Complex that includes:
-Hydrocracker and Hydrotreater plant(MHC-DHT 500T/H max.capacity, 160b max.pressure)for NIS/GAZPROM NEFT at PANCEVO, SERBIA.
-HGU (77,000 Nm3/hr, 320 burner Reformer)
-SRU with TGTU(Clauss, 160T/d max, capacity)
- SWS (40 m3/h, max.capacity)
-ARU
-PSA with Hydrocarbon and Sour Flare system, Condensate system, Fuel gas system, Cooling Water Tower, Interconnecting Facilities, etc.
Responsibilities and duties:
-Assisting the panel operator(DCS)for normal work, troubleshoting
-Start-up and shut down of plants
-Yearly maintenance&Depressurising/Purging/Internal&external
-Ensured complete safety of employees.
-Managed and supervised safety teams during emergencies.
- Overseeing production scheduling and equipment maintenance.
- Ensuring that employees are doing their jobs correctly.
- Prepairing work requests for minor and emergency repair of plant equipments.
-Take charge of operations when the manager is not around.
-Assist any new or inexpert workers to get necessary training.

Shift Supervisor

Hydrocracker and Gas Oil Hydro-Treater Complex

Shift Supervisor Mild Hydrocracker, Gas Oil Hydro

Treater and Hydrogen Generation Unit

From May 2013

• Responsible for managing operators and maintenance technicians assigned to the Mild Hydrocracking, Gas Oil Hydro-Treater Complex and Hydrogen Generation Unit - Steam Reformer. Responsibilities include looking after the safe operation of process and ancillaries of the complex, preparing production reports, maintenance requests, providing technical inputs to support groups, identifying problems and solving those.
• Trained and educated operators regarding proper work completion and adherence to company standards. Ensured that production deadlines and operating targets are met.

DCS Operator

MHC-DHT

on Hydrocracker and Hydrotreater plant, YOKOGAWA DCS SYSTEM, (MHC-DHT 500T/H max.capacity, 160b max. pressure) for NIS/GAZPROM NEFT at PANCEVO, SERBIA.My work included start up activities to normal work, troubleshouting, emergency shut down, test run to full capacity, daily report to management.

DCS Operator

Yokogawa

on the Hydrocracker and Gas Oil Hydro-Treater Complex

DCS Operator Mild Hydrocracker

Gas Oil Hydro

February 2012 - May 2013

• Assigned as a DCS Operator on the Mild Hydrocracker, Gas Oil Hydro-Treater Complex and Hydrogen Generation Unit - Steam Reformer where I was responsible for the safe operation of process units, monitoring system operating parameters and interceding when parameters are outside the normal operating limits to return operation back to normal operating condition. Maintained operating logs and provided production input to the Shift Supervisor for the daily and weekly production management reports.
• Assisted in the preparation of equipment for maintenance ensuring the safe handover of equipment to maintenance. Maintained inhibit and lockout registers of equipment taken out of service.
• Trained operators in DCS operation

DCS OPERATOR

YOKOGAWA DCS SYSTEM

on a 77,000 Nm3/hr, 320 burner Reformer HALDOR TOPSOE DESIGN HYDROGEN PLANT for NIS/GAZPROM NEFT at PANCEVO, SERBIA.


- Yearly Maintenance&Depressurising/Purging/Internal&external inspection/Hydrotesting of vessels
- Hydrogen plant Precommissioning, Commissioning
- Start-up and Operations
- Steam and condensate distribution systems
- Troubleshooting
- Precommissioning:Equipment and piping flushing, purging, blow-out and other cleaning, pressure tests-hydro tests, pneumatic and service test, inspection of mechanical completion, punch listing, line blowing, leak testing, preparation of natural gas compressor, involved in catalyst loading-up, preparation of P&iD-s mark ups for system line blowing and leak testing, steam and condensate distribution systems, hydrotesting of vessels
- Commissioning:Heaters dry-out, chemical cleaning of steam drum and downcomer and riser, start-up, test run, run-in and commissioning up to design production capacity, shut down.

Hydrocracker, Gas Oil Hydro-Treater and Hydrogen Generation Unit - Steam Reformer Complex

Treater and Hydrogen Generation Unit

CLG Technologies

Attended vendor training courses with CLG Technologies, Haldor Topsoe, and Yokogawa

Pre-Commissioning and Commissioning Hydrocracker, Gas Oil Hydro

April 2010 - February 2012

• Assigned to the Mild Hydrocracker and Gas Oil Hydro-Treater Complex where I was responsible for participating in the monitoring of construction and installation activities, pre-commissioning and commissioning activities of the refinery newly constructed 500 t/h at 160 bar(g) CLG Technology Hydrocracker, Gas Oil Hydro-Treater Complex and 77,000 Nm3/h Haldor Topsoe Hydrogen Generation Unit - 320 Burner Steam Reformer.
• Pre-commissioning activities include witnessing of piping hydrostatic testing, loop checks, lube-oil flushing, motor solo runs, and ensuring that the construction contractor complied with the refinery safety requirements and conditions.

DCS OPERATOR

HONEYWELL DCS SYSTEM

on FCCU Complex(Fluid Catalitic Cracking Unit).That included start up to normal proces condition, normal work, troubleshooting, emergency shut down procedures and daily reporting to management.

DCS Operator

Honeywell

on the Fluid Catalytic Cracking Unit (FCCU)

DCS Operator

Cause & Effect and Fire and Gas Systems

May 2008 - April 2010

• Commissioning and Start-up activities such as performing system conformity walk-downs, preparing flushing and leak test packs, executing final piping system flushing, steam blowing, leak testing, functional testing of control loops, Cause & Effect and Fire and Gas Systems, inspecting vessel internals for compliance with vendor and engineering drawings, witnessing loading of catalyst. Prepared the units for the initial start-up participating in the high pressure leak test, heat up, catalyst sulfiding and introduction of feed stock.
DCS Operator FCCU Complex -05/2008 to 04/2010
• Assigned as a DCS Operator on the FCCU Complex where I was responsible for the safe operation of process units, monitoring system operating parameters and interceding when parameters are outside the normal operating limits to return operation back to normal operating condition. Maintained operating logs and provided production input to the Shift Supervisor for the daily and weekly production management reports.
• Assisted in the preparation of equipment for maintenance ensuring the safe handover of equipment to maintenance. Maintained inhibit and lockout registers of equipment taken out of service.
• Trained operators in DCS operation

DCS OPERATOR

HONEYWELL DCS SYSTEM

on SRU(CLAUSS), ARU and SWS .That inlcluded start up to normal proces coditions, also involved in planning and emergency shut down procedures, daily reporting to management, experience plant cleaning of reactors, furnaces

DCS Operator

Honeywell

on the Sulphur Recovery Unit (CLAUSS), Amin Regeneration Unit and Sour Water Stripper

DCS Operator SRU

ARU and SWS Complex

February 2005 - May 2008

• Assigned as a DCS Operator on the SRU, ARU and SWS Complex where I was responsible for the safe operation of process units, monitoring system operating parameters and interceding when parameters are outside the normal operating limits to return operation back to normal operating condition. Maintained operating logs and provided production input to the Shift Supervisor for the daily and weekly production management reports.
• Assisted in the preparation of equipment for maintenance ensuring the safe handover of equipment to maintenance. Maintained inhibit and lockout registers of equipment taken out of service.

DCS OPERATOR

HONEYWELL DCS SYSTEM

on Bitumen plant. That inlcluded start up to normal proces coditions, also involved in planning and emergency shut down procedures, daily reporting to management, experience plant cleaning of reactors, furnaces

DCS Operator

Honeywell

on the Bitumen Plant

DCS Operator

Bitumen Plant

February 2003 - February 2005

• Assigned as a DCS Operator on the Bitumen Plant where I was responsible for the safe operation of process units, monitoring system operating parameters and interceding when parameters are outside the normal operating limits to return operation back to normal operating condition. Maintained operating logs and provided production input to the Shift Supervisor for the daily and weekly production management reports.
• Assisted in the preparation of equipment for maintenance ensuring the safe handover of equipment to maintenance. Maintained inhibit and lockout registers of equipment taken out of service.

FIELD OPERATOR

on Bitumen plant, daily cheking the operational equipment, taking action in critical situations, changing over of feed tanks, starting pumps for loading for shipment of production feed.
Further expirience:
• Achieving the shift production and quality of products by continuous monitoring and controlling the process variables through YOKOGAWA or HONEYWELL DCS.

• Assisting to shift incharge for safe plant operation, troubleshooting & energy monitoring.
• Following the safe startup & shutdown procedures& work permit system.
• Make safe environment by following the safety procedures & house keeping of the plant.
• Pre- commissioning & commissioning activities
• Punch list preparation as per P&iD.
• Column internal inspection
• Compressors commissioning
• Chemical cleaning procedures
• Equipment cleaning
• Steaming out of the equipment
• Furnace dry out
• Catalyst loading
• Sulfiding of the catalyst

ADITIONAL ON-WORK EDUCATION:
Process Training:
-MILD HYDRO CRACKER TRAINING BY CHEVRON-LUMMUS
-GAS OIL HYDRO TREATER TRANING BY CHEVRON-LUMMUS
-VACUUM UNIT TRAINING BY GS E&C.
-SULPHUR ACID RECOVERY UNIT TRAINING BY HALDOR TOPSOE
-HYDROGEN PURIFICATION UNIT TRANING BY HALDOR TOPSOE
-SWS, ARU, SRU(CLAUS and TGTU)TRAINING BY WARLEY PARSONS
-YOKOGAWA(DCS and ESD systems) TRAINING BY YOKOGAWA

Training for:process description, catalyst, control philosophy, start-up, normal operation, planed shutdown, emergency shutdown for Hydrogen Plant in HALDOR TOPSOE A/S LYNGBY DENMARK.

Field Operator

Bitumen Plant

Field Operator

Bitumen Plant

May 1997 - February 2003

• Assigned as a Field Operator on the Bitumen Plant where I was responsible for the safe operation of process units, monitoring system operating parameters and interceding when parameters are outside the normal operating limits to return operation back to normal operating condition. Started, stopped and switched equipment as instructed by the DCS Operator or Shift Supervisor.
• Prepared equipment for maintenance ensuring the safe handover of equipment to maintenance. Maintained registers of equipment taken out of service and the PTW and Lock Out registers

Qualifications & Certifications

Cnemical high school

Chemical school

Chemical Technician

Pancevo High School

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×