Perez - Autocad Technician - Perth, WA, Australia

Nathaniel Perez

Perth, WA, Australia


Autocad Technician

  • Full time
  • Part time
  • One time
  • Contract
  • Temp

Work History

Plastic Technician

May 2013 - February 2014

* Perform butt welding of pipes from 50 - 500 PE diameter.
* Fabricates water tank and bund up to 4 meter diameter and as big as 10000 liters capacity.
* Perform PP and PVC piping gluing attached to vital water treatments components such as valves, pumps and controls.
* Doing on-site works and jobs in metropolitan and outside metro area.
* Operates Butt welding machine such as Dixon 225, Plastic Sheet Welder (WEGENER)
* Operates milling and lathe machines for the fabrication of complicated parts that requires critical dimensions and measurements.
* Operates workshops tools and equipment such as plastic extrusion gun, routers, jigsaw, bandsaw, chainsaw, die grinder, blow torch, scissors lift, overhead cranes, table saw, sheet welder butt welding machine.
* Interprets blue print and CAD drawings.
* Familiar with OH&S as part of daily job routine.
* Practice safety and hazard free environment.

Carmelray Industrial Park II, Brgy. Punta, Calamba City, Laguna

Company Profile: An ISO-certified US Company which is a leading manufacturer and distributor of component
Plastic packaging products used in the semiconductor industry worldwide.


PERA (Neville Clarke)

Pneumatic Technologies Inc

From May 2008

May 01, 2008

Advantek Philippines Inc

Up to November 2013

Philippines Inc.

Meralco Foundation

August 2007 - November 2007

Mitutoyo Asia Pacific Pte.Ltd

From November 2007

January 14, 2003 ~ January 15, 2003

Advantek Philippines Inc

Up to January 2012

December 6-9, 2004

Advantek Philippines Inc.
February 12-15, 2008

Plastic Technician

Production Department

October 2003 - March 2013

* Qualifying dies and tooling inserts for thermoplastic press machine.
* Perform mechanical troubleshooting on plastic injection, extrusion, press machines, drive system, conveyors. Cams and Motors.
* Interpreting blue-print drawing and exploded drawings for tool and die parts and machine parts.
* Sets up the die, tooling components such as forming punches, piercing components, ejector pins, cavity and mold for shaping different models of carrier tapes and lock reels being supplied to the electronics and semiconductor companies.
* Repair and fabrication of mechanical parts using lathe, milling, grinders and surface grinder.
* Participate on the innovative projects of Eng'g and NPD for the qualifications of new plastic product for the new customers
* Performs repairs and resurfacing-regrinding of tool & die parts to meet blue print drawing specification and tolerance.

* Maintenance and PM of electro-mechanical press machine & troubleshooting of pneumatic and electromechanical circuit of, embossing press and vacuum forming press which include programs, motors, drives, panel board, heaters, sensors, relays, switches and timing gears and timing pulley.
* Troubleshooting press machine controls from board to component level.
* Installation of servo motors, stepper motors, pumps, servo drives, sensors and switches.
* Re-wiring electrical circuit, pneumatic connections, and harnessing of electronic controls.
* Perform quarterly, semi-annually maintenance of compressor, pumps, conveyors and motor gearheads.

Lot B1-3, Road 6, Carmelray Industrial Park II, Brgy. Tulo, Calamba, Laguna 4027

Company Profile: ISO certified Japanese Manufacturer of Hard Disk Drive Actuator and coil winding assembly.

Mitutoyo Asia Pacific Pte.Ltd

January 2003 - January 2003


August 2003 - August 2003


* Basic Fire Safety Seminar

* First Aid Training

* ISO 14000 Awareness Program

* Maintenance and Principle of Rofin-Sinar Laser

* Polymetric Material

* Single Screw & Double Screw Extrusion

* Staging 3-Stage Die for Plastic Embossing

* Injection Molding

* Extruder Machine Setup (P2T) Pellet to Tape

* Plastic Embossing Press

Metal Industry Research and Development Center (MIRDC)

Advantek Philippines Inc

Up to October 2012


Mold Setter/ Plastic Injection Molding Technician/Maintenance

Japan Steel Works

January 2001 - September 2003

Perform operation, PM and troubleshooting of electric servo drive plastic injection molding machine JSW (Japan Steel Works) model JT-70RAD & NISSEI.
* Performs mold qualification on new products and molding machine qualification.
* Parameters simulation during plastic mold qualifications.
* Qualification of polycarbonate and polystyrene resins and pellets.
* Assemble and disassemble of mould and dies, screw head and injection cylinder.
* PM of injection machine such as; screw head, barrel chamber, oil, heater, hopper dryer, heater and sensors.
* Performs minor repair on jig and fixture using conventional lathe, milling, drill press and surface grinder.
* Perform alignment and calibration of clamping unit and injection parameters.
* Maintenance of injection hopper dryer and oil heater.
* Parameters simulation using Syscom 2000 controls.
* Fabricate production line panel boards and tables made of steel and acrylic plastics.
* Jig and fixture design/fabrication using NC milling, bench lathe, band saw, arc welding machine and surface grinder.
* Jig designing using AutoCAD software.

3. OPTODEV Phil. Inc.
Liip, Mamplasan, Binan, Laguna

Company Profile: Manufacturer of Optical Lenses

Philippine National Red Cross (Safety Service)

Up to July 2004

u Phils. Inc.

Advantek Phils. Inc

September 2001 - July 2008

Plastic Lense Vacuum Oven Operator

Production Department

June 2000 - October 2000

* Operates vacuum oven, loading and unloading of plastic lenses tray inside the chamber.
* Loading vacuum oven parameters, pressure and temperature and laser timing.
* Perform weekly shutdown and start-up both production equipment/facilities equipment.
* Daily monitoring and PM of Vacuum Oven, DI-Washing, Filters, Gauges, Indicators, Compressors & Motors.
* Perform machine sandblasting and cleaning of oven panels.

Canlubang, Laguna 4027

Company Profile: An institution for the youth to be highly competent technical trainor and skilled worker.


May 1999 - April 2000

* In-charge of electronics drafting using Electronic Workbench, Turbo CAD, Part-time Mechanical Drafting Instructor using AutoCAD R12.
* Teaching Basic Electronics, Industrial Electronics, testing of industrial components using multi meter, oscilloscope and frequency generator. Instrumentation (Open and Closed Loop Troubleshooting) PI&D Controller, PLC Siemens S7, LOGO, Ladder Diagram, Digital Electronics both actual and theoretical.
* In-charge of purchasing and estimation of electronics laboratory supplies.
* Designing training programs, curriculum, technical manuals for laboratories, experiments, seminars presentation using computers audio-visual equipments and presentations.

Carmelray I, Canlubang, Laguna 4027

Company Profile: Vocational-Technical Center, an institution promoting and educating the youth to be highly competent skilled worker.

Instructor/Department Head

Electronics Dept

September 1998 - February 1999

* Teaching Digital Electronics Drafting using AutoCAD R12 and Electronics Workbench.
* Teaching Robotics using HANNS-SEIDEL model and analog/digital instructional kit.
* Designing training materials and modules for Advanced Skills Training Program (ASTP).
* Teaching PLC Siemens S5 and S7

Laguna Technopark Sta. Rosa, Laguna

Company Profile: Manufacturer of Automotive Audio-Video Components. (car stereos, sensors and cd
changer assembly).

Advantek Phils. Inc

September 1998 - March 2007

Production Technician

Technical Department

April 1997 - October 1997

* Line support and troubleshooting of PCB assembly line.
* Maintenance of Electromechanical Equipment for Tuner Assembly.
* Repairing of In-Circuit-Tester/Car Stereos and Tuner Module, LCD Displays.
* Handling testing instruments: Signal Generator 200 Mhz, Spectrum Analyzer (Kenwood), Noise Meter, Oscilloscope (Kenwood), LCR meter VOM, Digital Probe and Schematic Drawing Analyzis.

Mayapa, Calamba City.

Company Profile: Steel Fabrication and Machining Jobs.

Fabricator Assistant


February 1997 - March 1997

* Assigned in riveting and polishing stainless steel tables and drawers for industrial use.
* Handling lathe machine, milling and grinders.
* Buffing stainless jigs and fixtures using sanders.
* Cutting tubular metal and plates using bandsaw.

Calamba Trade Center, Calamba City.

Company Profile: Audio-Video, Electrical Repair Center (Sony Center)

Audio Video Repair Technician


April 1996 - May 1996

Assigned to repair Audio-Video equipment, car stereos, amplifiers and paging address system.
* Handling testing instruments: Signal Generator 200 Mhz, Oscilloscope (Wheeler) LCR meter VOM, Digital Probe and multi meter.
* Servicing electronic and electrical home equipment.

* Forklift Operations Coastal Enterprises Pty Ltd. January 29, 2014
* Blue Dog Training August 14, 2013
* Buttwelding and Electrofusion XLT Training Center May 2013
* Omron Basic Servo Application Omron Asia Pacific Pte. Ltd. July 23, 2009

* AutoCAD 2D/3D Modelling


* Dimensional Metrology with Tolerancing & Fits

* Effective Calibration Management

* Basic Metrology Training Course

Qualifications & Certifications

Technical Education

Don Bosco College Seminary

Rizal Institute of Don Bosco

Primary Education

Elementary School

Skillpages has been acquired by! is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Are you sure that you want to leave?