Ejaz - Electronics Engineer - Jubail, Eastern Province, Saudi Arabia

Naseem Ejaz

Jubail, Eastern Province, Saudi Arabia

Services

Electronics Engineer

Summary:

Manager construction in the oil & gas, petrochemical.

Work History

TSD/PPD Construction Manager E&I (Section Head E&I)

Saudi Binladin Group

From September 2009

(PCM Division) K.S.A (Presently Known as PCMC) at the Al-Jubail Office to Managing the all E&I on going projects and providing the Technical, Procurement, Construction and proposal support to the Company Projects.

Manager E&I in

Saudi Binladin Group

August 2006 - August 2009

(PCM Division) K.S.A at the
Construction of Utilities and Offsite works (K-002) required for Yanbu Petrochemical Complex Project (Yansab), Yanbu, K.S.A (Yanbu National Petrochemical Company, A Sabic Company). Under Flour Daniel (USA) and Manage by Foster Wheeler (UK)

Work Included Procurement, Construction, Inspection, Testing and Commissioning of Electrical, Instrumentation, CP, Telecommunication, Fire & Gas work for 2no. MV/LV Substations, Cooling Tower, Seawater Chemical Treatment, Hypochlorite System, Sea Water Pumps and Basin, Flare Area, Firewater Tank, Incinerator Area, Effluent Water, Cooling Water Tank, Cooling Water Exchangers, Methanol/BTX Storage Area, Benzene Storage Area, Pygas Raffinate/MTBE Storage Area, Butene/C4 Raffinate Storage Area and Street Lighting.

Construction Manager E&I

Saudi BinLadin Group

September 2005 - July 2006

(PCM Division), K.S.A at the General Construction and OSBL works (K-050) required for
United Olefins Complex Project, Jubail, K.S.A
(Jubail United Petrochemical Company, A Sabic Company).
Designed and Engineered by Fluor Daniel (USA)

Work Included Procurement, Construction, Inspection,
Testing and Commissioning of Electrical, Instrumentation,
Telecommunication, Cathodic Protection and Fire & Gas work For
MV/LV Switchgear, Cooling Tower, Sea Water Intake, Cooling
Water Exchangers and Strainers, Cooling Water Turbine,
Seawater Pump, Boiler Feed Water Pump, Flare Area,
Incinerator and Oxygen Line CP.

Senior Engineer E & I in

Saudi BinLadin Group

February 2004 - October 2004

(PCM Division), K.S.A at the Desuperheater, EG-2 and Hexene works (K-045) required for
United Olefins Complex Project, Jubail, K.S.A
(Jubail United Petrochemical Company, A Sabic Company).
Designed and Engineered by Fluor Daniel (USA)

Work Included Complete Procurement, Construction, Inspection,
Testing and Commissioning of Electrical, Instrumentation,
Telecommunication, Fire & Gas work for
MV/LV Switchgear, Hexene Tank, Sea/Cooling Water Exchangers
And Strainers.

Manager Construction E&I

Incharge E&I

November 2004 - August 2005

in
Saudi BinLadin Group (PCM Division), K.S.A at the
Linear Alpha Olefins works required for
United Olefins Complex Project, Jubail, K.S.A
(Jubail United Petrochemical Company, A Sabic Company).
Designed and Engineered by LINDE (Germany)

Work Included Complete Procurement, Construction, Inspection,
Testing and Commissioning of Electrical, Instrumentation,
Telecommunication, Fire & Gas, Lightning Protection, HVAC
System, CO2 System and Breathing System work for
Control Building, MV/LV Substation, Generator Building, Complete
Plant Underground Duct banks and Plant Grounding.

QA/QC Engineer E & I and Project Coordinator E&I in

Saudi Bin Ladin Group

October 2002 - January 2004

PCM Division, K.S.A at the construction of Utilities and Offsite works (K-034) required for
United Olefins Complex Project, Jubail, K.S.A
(Jubail United Petrochemical Company, A Sabic Company).
Designed and Engineered by Fluor Daniel (USA)

Works Included Complete Procurement, Construction, Inspection, Testing and Commissioning of Electrical, Instrumentation, Telecommunication, Cathodic Protection, Fire & Gas Work For pipe racks, sub- stations, seawater intake , seawater outfall, seawater cooling towers, Aramco metering station, wastewater retention basin, MV and LV cables installation and testing etc
Duties and Responsibilities
• Assisting in Preparation of Inspection & test plans (ITP, s), quality plans, and quality procedures and quality verifying formats.
• Liaison with QC inspectors for inspections i.e. materials inspections, storage and handling and preparation of Instrument loop folders.
• Review of material submittals and purchase orders prior to submission to client for approval
• Inspecting and monitoring E&I construction activities as per the construction drawings, specifications and manufacturer recommendations, during erection.
• Monitoring activities related with instrument calibration and pre-loop and final loop checking.
• Coordinating and managing the E&I construction activities related with civil and mechanical.
• Preparing Quality Verifying Documents for on going activities and getting these checked and signed by Engineer and Employer.
• Meeting and discussion with QC Manager and Project Manager and assisting them on matters relating to quality and progress of works.
• Preparation of turnover and Handing over documents, to be submitted to Engineer and Company

Project Engineer E&I (Construction & QC)

Saudi Binladin Group

October 2001 - September 2002

PCM Division, at the
Expansion of chlorine & pigment plant required for
Crystal Project, Yanbu, KSA
Designed and Engineered by Simon Carves (UK).

Works Included Complete Procurement, Construction, Inspection, Testing and Commissioning of Electrical, Instrumentation, Telecommunication, Lightning Protection, Electrical Heat Tracing and Fire & Gas Work For
MV/LV Substation, Control room Building, Electrolyzer Building,
Rectifier Package unit, H2So4 Unit, Analyzer House, Chiller Package Unit, Compressor Unit, Chlorine unit , Titanium dioxide unit, Pre-heater Building, CO Package unit and Honeywell DCS System installation.

Responsibilities
• Being an Incharge E&I, managing overall construction/quality control activities i.e. Materials, Manpower, Equipments, QC Procedures, ITP's, Method statements and Material submittals.
• Meeting and discussion with Engineer and Employer on various matters relating to Engineering, Quality, Progress and cost impacts of works
• Assisting in Preparation of Construction schedules, Progress monitoring. Participation in preparation of Change orders (Variation order, Day work orders, Prime cast items)

QA/QC Engineer E&I and Construction Engineer

Saudi Binladin Group

June 2001 - September 2001

PCM Division, at
Ammonia De-bottlenecking Project required for
Samad Project, Jubail, KSA
Designed and Engineered by Ammonia Castlay (Italy).

Works Included Complete Procurement, Construction, Inspection, Testing and Commissioning of Electrical, Instrumentation Work For Removal of exchangers, Air booster package erection work, Pre-reformer and fired heater package erection work, Catalyst & chemical loading and unloading work, Burner Management system, PH Analysers, HT/LT Switchgear, Marshalling cabinets, Radar Level Transmitters, PLC Controllars, MV/LV Cable termination, Differential Pressure Transmitters, Flow meters, Temperature Transmitters, Loop Checking, YOKOGAWA DCS System installation, Instrument Air and Plant Air System.

QA/QC Inspector E&I and Site Engineer

Saudi Binladin Group

December 2000 - May 2001

PCM Division, at the
CFUP Project required for
Ibn-Zahr PPII Project, Jubail, KSA
Designed and Engineered by Saudi Parsons, Saud Consult & Lumas.

Works Included Complete Procurement, Construction, Inspection, Testing and Commissioning of Electrical, Instrumentation, Telecommunication and Fire & Gas Work For
MV Substation, Cooling water pump, Cooling water turbine,
Exchangers, Shipping building, Laboratory building, FM200 system installation and Mosque.

Electrical & Instrument Engineer (Maintenance)

Pakistan Vinyl Industries

February 1996 - November 2000

at Kot-Lakhpat, Lahore, Pakistan
The company is Petrochemical Processing Industry Leading
Manufacturing of PVC/PU coated artificial leather, PVC films
And sheets.

Responsibilities
• Being an In charge E&I, managing overall maintenance, testing & quality control activities i.e. Materials, Repair Procedures, Equipments, QC Procedures, ISO-9001 coordination.
• Works Included Complete preventive & breakdown maintenance and Trouble shooting related to electrical, electronics& pneumatic control system of the plant machinery like as H.T/L.T distribution, Switchgears, L.T panels, Diesel Generators with AMF and Auto Synchronizing system, PID Temperature controllers, Pneumatic Control system, PLC control circuits, Thyristor control DC drives, Inverters, PLC control oil heaters, VS motors, Pressure transducers.
• Repairing monthly and weekly Inspection, testing and maintenance plans.
• Keeping the inspection, testing and maintenance repair history records of all machinery.
• Erectioning and commissioning of newly purchased equipment and plant.

Electrical Maintenance Engineer

Sargodha Textile Industries Ltd

January 1994 - December 1995

at Sargodha, Pakistan.
The company is manufacturer and exporters of cotton/blended
Yarns and fabrics.
Responsibilities

• Works Included Complete preventive & breakdown maintenance and Trouble shooting related to electrical, electronics& pneumatic control system of the plant machinery like as H.T/L.T distribution Switchgears, L.T panels, Diesel Generators, PID Temperature controllers, Pneumatics Control system, PLC control circuits, Thyristor control DC drives, Inverters, PLC controllers, VS motors, Pressure transducers.
• Repairing monthly and weekly Inspection, testing and maintenance plans.
• Keeping the inspection, testing and maintenance repair history records of all machinery.
• Erectioning and commissioning of newly purchased equipment and plant.

Electronics Engineer

Kohinoor Textile Mills Ltd

June 1993 - November 1993

at Faisalabad, Pakistan.
The company is involved in production of high quality Yarn.


Responsibilities

• Works Included Complete preventive & breakdown maintenance and Trouble shooting related to electronics& pneumatic control system of the plant machinery like as, PID Temperature controllers, Pneumatics Control system, PLC control circuits, Thyristor control DC drives, Inverters, PLC controllers, VS motors, Pressure transducers..
• Erectioning and commissioning of newly purchased equipment and plant.

Electronics Supervisor

Sitara Textile Mills Ltd

December 1992 - May 1993

at Faisalabad, Pakistan.
The company is involved in dying and printing of cloths.

Responsibilities
• Works Included Complete preventive & breakdown maintenance and Trouble shooting related to electronics& pneumatic control system of the plant machinery like as, PID Temperature controllers, Pneumatics Control system, PLC control circuits, Thyristor control DC drives, Inverters, PLC controllers, VS motors, Pressure transducers.

Personal Resume
.


Address (K.S.A) P.O Box # 11976, Al-Jubail , K.S.A
Ph # Mob. 00966-502009920
Ph # Off. 00966-3-3419815 Ext.227
Ph # Res. 00966-3-3621786
Address (Pakistan) 28A-Noor-ul-haq Colony, Near Govt. Degree Collage for Women,
Bahawalpur, Pakistan.
Ph # 0092-3315104617

House# 47, Lane no.2, Army Officer Colony, Morgah,
Rawalpindi, Pakistan.
Ph # 0092-51-5486276

E-mail nejaz2013@gmail.com

Qualifications & Certifications

Electronics Engineering

NED University

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×