Nareen - Mechanical Designer - Hyderabad, Andhra Pradesh, India

Naresh Nareen

Hyderabad, Andhra Pradesh, India

Services

Mechanical Designer

Work History

pdms modler and cad engineer

tss projects

November 2009 - November 2009

Experience in the field of Mechanical designing and drafting (Processing plants fabrication& p&ids ), producing structural drawings, fabrication drawings.
• Development of preliminary layout according to project input.
• Modification of layout drawings
• Check the layout drawings
• Releasing GA drawings for detailed drawings preparation.
• Checking GA and detailed drawings with engineer input & project input
• Prepare material list for steel fabrication
• Preparing drawing on all elevation, floor plan and detail drawing as required for the project as per requirements.
• Preparing production drawings and machining details for the steel frames and components.

PDMS MODLER

TSS GROUP OF COMPANY (TSS PROJECTS)

November 2009 - November 2009

• Experience in the field of Mechanical designing and drafting (Processing plants fabrication p&ids ), producing structural drawings, fabrication drawings.
• Development of preliminary layout according to project input.
• Modification of layout drawings
• Check the layout drawings
• Releasing GA drawings for detailed drawings preparation.
• Checking GA and detailed drawings with engineer input & project input
• Prepare material list for steel fabrication
• Preparing drawing on all elevation, floor plan and detail drawing as required for the project as per requirements.
• Preparing production drawings and machining details for the steel frames and components.

Work Experience:

Designation : PDMS & Cad Designer (sep 2009 – Till Date),
Organization : TSS Projects Pvt Ltd, hyderabad,
Tools : Auto-CAD,PDMS.
Project - Lube Oil Project Jordan
 Pipe routing as per P&ids in the PDMS
 Extraction of Isometric Drawings from PDMS
 Preparation of Piping GAD
 Modeling of equipments in PDMS as per vendor drawings
 Modeling of temporary platforms required for operational and Maintainence in PDMS.
 Performing Data consistency check and Clash check.
 Providing structural Information drawings to Structural department.
 Providing Tie-in point co-ordinates to the pipeline department.
 Extraction of GA’s in PDMS Draft.
 Modeling of pipe supports in PDMS
 Preparation of Fabrication Drawings for pipe supports
 Preparation detailed drawings for the pipe supports and BOM for the pipe supports

CAD ENGINEER

drl

May 2006 - September 2009

• Experience in the field of Mechanical designing and drafting (Processing plants fabrication& p&ids ), producing structural drawings, fabrication drawings.
• Development of preliminary layout according to project input.
• Modification of layout drawings
• Check the layout drawings
• Releasing GA drawings for detailed drawings preparation.
• Checking GA and detailed drawings with engineer input & project input
• Prepare material list for steel fabrication
• Preparing drawing on all elevation, floor plan and detail drawing as required for the project as per requirements.
• Preparing production drawings and machining details for the steel frames and components.

Projects

PDMS & Cad Designer

RESUME

NARESH.G
E-mail:naresh.chary99@gmail.com.
E-mail:naresh_frindship@yahoo.com. Contact No : +91-9705528594
Career Objective:
Over 6 years of Experience in the field of Piping & Mechanical designing and drafting Processing plants and fabrication drawings. Proficient in (piping, PDMS & Auto Cad ) Familiar with Piping codes and standards ASME, API, ANSI
Summary of Experience:
 Experience in the field of Mechanical designing and drafting.
 Development of preliminary layout according to project input.
 Modification of layout drawings
 Check the layout drawings
 Releasing GA drawings for detailed drawings preparation.
 Checking GA and detailed drawings with engineer input & project input
 Prepare material list for steel fabrication
 Preparing drawing on all elevation, floor plan and detail drawing as required for the project as per requirements.
 Preparing production drawings and machining details for the steel frames and components.
Work Experience:
 Designation : PDMS & Cad Designer (sep 2009 – Till Date),
 Organization : TSS Projects Pvt Ltd, Hyderabad,
 Tools : Cad 3d-Modeling Auto-CAD2d ,PDMS.
About Company:
TSS PROJECTS Pvt. Ltd. is a complete turnkey solutions company for Fuel oil handling systems (FOHS), And Chemical on shore projects, LP Piping and CW Piping, Heat tracing (Electrical and Steam), Utility Piping, LPG Installation and Miscellaneous tank ages (Industrial Tanks & Storage Tanks).
• The services detail design, engineering, mechanical fabrication, erection and commissioning of steam and electrical heat tracing with accessories, The company specializes in providing design and engineering services for various Agro Industrial process technologies to suit specific process requirements of clients. The Company also undertakes work on carbonization with recovery of Agro waste distillates and gases for usage as fuels. Substantial work is also done in the reactivation of catalyst and adsorbents, simultaneously recovering valuable by-products. Nutraceuticals Plants, Solvent Extraction Plants. Refinery, Oleoresin Plant. Herbal Extraction Plants. Food Processing. Aum provides alternative source of generating energy by setting up various plants. Bio-Gas Plants, Bio-Diesel Plants, Agro Bio-Tech Park Concepts.
Project - Lube Oil Project Jordan
 Pipe routing as per P & ids in the PDMS
 Extraction of Isometric Drawings from PDMS
 Preparation of Piping GAD
 Modeling of equipments in PDMS as per vendor drawings
 Modeling of temporary platforms required for operational and Maintainence in PDMS.
 Performing Data consistency check and Clash check.
 Providing structural Information drawings to Structural department.
 Providing Tie-in point co-ordinates to the pipeline department.
 Extraction of GA’s in PDMS Draft.

Project – PTIBR (PT Indo Bharat Rayon).

 Modeling of equipment in PDMS like pumps,filters,exchangers and arranging them as per equipment layout
 Pipe Routing as per P&ID’s as per standards
 Checking of ISO’s and Preparation of BOM.
 Checking of lines for Data Consistency and Clashes in PDMS and Preparation of clash reports
 Providing tie-in-point details wherever required in the plant.
 Modeling of civil structures as per civil drawings provided
 Marking supports in model as per standards and providing inputs for stress analysis
 Extraction and preparation of General arrangement drawings.

Work Experience:
 Designation : Cad Designer (SEP 2006 –AUG 2009),
 Organization : DR REDDY’S LABAROTARIES,
 Tools : Auto Cad3d –modeling & 2d.

Project - Vasanth Chemicals Ltd., Hyderabad
 Drafting Boilers, reactors, storage tanks ,plant layout, nitrogen plant , dm plant drawings (processing plant all equipments)
 Preparing P&ID’s using AutoCAD.
 Preparing of Equipment Layout using AutoCAD.
 Extracting Piping Bill of Material.
 Preparation of Fabrication drawings for Process Pressure Vessels. Detailing & Estimating for the Fabricated Equipment.
 Development of Equipment Layouts
 Development of Piping Layouts
 Preparation of Isometric Drawings
 Drafting chemical plant equipments like nitrogen plant Dm plants etc

Project - Bio-plus Life Sciences Ltd., Bangalore API-Plant
 Involved in equipment modeling of various equipments In the plant as per vendor information
 Pipe Routing as per P&ID’s and revising as per site requirement and stress analysis
 Extraction and checking isometrics and preparing BOM
 Preparation of clash reports
 Extraction and preparation of General arrangement drawings

Technical Skills:
 Design Packages : AutoCAD3d-2d , PDMS ,PIPING.HVAC
 Operating System : Windows 98/2000/XP

Education Details :
 Secured Diploma in Mechanical Engineering from Govt polytechnic, kothagudem, A.P.
 S.S.C. from Z P High School ,NELLIPAKA.

Personal Details:
• Name G. NARESH
• Father Name Sri. G.Thrimurtulu,
• Date of birth 19/06/1986
• Sex Male
• Marital status Single
• Nationality Indian
• Languages know English, Telugu,
• Passport number K0653791

DECLARATION

I am confident of my ability to my work in a team. I here by declare that all the details furnished above are true to the best of my knowledge.

Place: HYDERABAD Yours faith fully,
Date:
(G. NARESH)


Qualifications & Certifications

diploma

zpss nellipaka

diploma

zpsschool

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Naresh Nareen provides the following services:


Supported Countries
Choose your country

×