Bui - Electrical Technician - Ho Chi Minh, Vietnam

Nam Bui

Ho Chi Minh, Vietnam

Services

Electrical Technician

Work History

Electrical & Instrument Technician

GAS FIELD

From May 2011

Responsibility:
• Carry out and assist in planned maintenance, repair work, shutdowns and isolations on all
facility electrical equipment in compliance with company procedures.
• Prepare the High Voltage Isolation Certificate when required.
• All information entered in logs, reports and maintenance records is complete and accurate.
• Liaise with Materials Co-ordinate for stores and spare gear and monitor consumption.
• Maintain electrical equipment within all applicable codes, regulations and standards;
maintain rating of all electrical hazardous area equipment.
• Supervise and support contractor's activities onboard and ensure work is carried out in a
safe and efficient manner and in compliance with company policy.
• Supervise and support contractor's activities onboard and ensure work is carried out in a
safe and efficient manner and in compliance with company policy
• Support contractors/vendors in all instrument issues.
• Operate, maintain (CM&PM) all Field Instrument Devices and in-door instrument
equipment such as control valves, Transmitters, Fire and Gas Devices which are on Bien
Dong offshore facilities.
• Implementation of instrument maintenance program on offshore installation.
• Calibration/testing of Instrument Devices.
• Troubleshoot and resolve problems on instrument parts of all process/utility systems.
• Report any defect or inspection report to the Assistant Electrical & Instrument Supervisor in a clear and concise manner and record all relevant information in logs as required.
• Perform critical function test for instrumentations
• Perform other tasks assigned by line Supervisor

Electrical & Instrument Technician

FSO RONGDOI MV12 - MODEC Inc

August 2006 - May 2011

Responsibility:
• Carry out maintenance and repair work, shutdowns, isolations and planned maintenance.

• Enter information in logs, reports, maintenance records and ensure that is accurate,
conforms to the Facility Management System -FMS.

• Manage spare parts and consumable store.

• Perform gas tests and isolations as per permit to work.

• Supervise and support contractors' activities onboard and ensure work is carried out in a
safe and efficient manner and in compliance with Facility Management System.
• Carry out Critical Function Test (CFT) as per FMS requirements.

• Update PLC data and store necessary back up files as required. Manage software changes under control of the Engineering Change Request.

• Maintain all electrical and instrument equipment within all applicable codes, regulations and standards. Maintain rating of all electrical hazardous area equipment.

Commissioning Electrical & Instrument Technician

RUBY WHP A&B PETRONAS Viet Nam

August 2005 - August 2006

Responsibility:
• Installations flow line control system (chock valve, pressure, level, temperature
transmitters).
• Checked, rectified and tested all lighting systems.
• Carried out Critical function Test Safety instrumented system (SIS) including Fire & Gas
system, Emergency Shutdown-ESD, Process Shutdown-PSD, Distributed Control System-
DCS.
• Performing inspection, calibration and testing of materials, Gas Detector, Flame Detector,
Pressure Transmitter, Flow Transmitter, Level Transmitter, Temperature Transmitter,
Control Valve, Shutdown Valve and equipment.
• Carry out Site Acceptance Test for Generator and function test all the AC & DC
Distributions.
• Installed the control cables, power supply cables and tubing.
• Installed heat tracing system and function test report.
• Carried out test Well Head Control Panel- WCP and started up well.
• Carried out Function test Uninterrupted Power Supply- UPS system.

Project: FPSO RUBY PRINCESS Petronas Viet Nam - MODEC Inc. - PTSC

Electrical Technician

August 2004 - August 2005

Responsibility:
• Carried out all maintenance PM/CM on electric equipment and system.
• Troubleshoot and resolve problems on instrument parts of all process/utility systems
• Rectified the faulty on electric control panel, Distributed, Air Circuit Breaker (ACB), and
Module case Circuit Breaker (MCCB).
• Overhauled Electric Motors.
• Carried out function test on Emergency Generator, Diesel Generator, Team Alternator and
Emergency Fire Pump.
• Manage spare parts and consumable store.
• Carried out weekly safety check on battery system and lifesaving system

Electrical & Instrument Technician

Oil & gas industry

From August 2004

- Familiar with the facilities electrical and instrument equipment, their safe operation and maintenance and has knowledge of safety requirements, including work permit systems, operational and emergency procedures.
- Knowledge Offshore system, especially FPSO, FSO and Well Head Platform on mechanical, electrical and instruments system.
- Has experience in operation and Maintenance Well Head Control Panel.
- Has experience in operation and maintenance Metering System on FSO and FPSO.
- Performing inspection, calibration and testing of materials, Gas Detector, Flame Detector, Pressure Transmitter, Flow Transmitter, Level Transmitter, Temperature Transmitter, Control Valve, Shutdown Valve and equipment.
- Loop-checking and verifying signal for all the field instrumentations to control room (HMI), testing and simulation of Flame Detectors and Gas Detector to ensure HH/LL trip value.
- Performing Cause/Effect check to confirm the USD/PSD/ESD and communicating with Control Room for confirming the logic and trip value of WHP.
- Carry out Site Acceptance Test for Generator and function test all the AC & DC Distributions.
- Perform maintenance, repair, troubleshooting; plant modification on the platform electrical & instrument devices in a safe and cost effective manner to ensure the facilities are available to meet production targets.
- Have experience on Variable Frequency Driver (VFD) of Cargo pump system.
- Manage spare parts and consumable materials.
- Understand Safety Assessment and Hazard Analysis.

Electrical & Instrument Technician

NPH MARINE SERVICE COMPANY

July 2003 - August 2004

Responsibility:
• Repaired alternator, electric control panel, Distributed, Air Circuit Breaker (ACB), and
Module case Circuit Breaker (MCCB).
• Supplied spare parts.
• Checked and rectified the faulty on crane electric, hydraulic & pneumatic system.
• Overhauled and rewired electric motor.

Electrical & Instrument Technician

PARKER VIETNAM

December 2001 - July 2003

Responsibility:
• Specializes hydraulic, pneumatic produces and fabrication services.
• Fabricated hydraulic power unit, cylinder.
• Installed instruments systems.
• Repaired hydraulic systems, valves, hydraulic pump.
• Supplied and installed automatic lubrication system.

Projects

Electrical & Instrument Technician

Carry out and assist in planned maintenance, repair work, shutdowns and isolations on all facility electrical equipment in compliance with company procedures.
Prepare the High Voltage Isolation Certificate when required.
All information entered in logs, reports and maintenance records is complete and accurate.
Liaise with Materials Co-ordinate for stores and spare gear and monitor consumption.
Maintain electrical equipment within all applicable codes, regulations and standards; maintain rating of all electrical hazardous area equipment.
Supervise and support contractor’s activities onboard and ensure work is carried out in a safe and efficient manner and in compliance with company policy.
Supervise and support contractor’s activities onboard and ensure work is carried out in a safe and efficient manner and in compliance with company policy
Support contractors/vendors in all instrument issues.
Operate, maintain (CM&PM) all Field Instrument Devices and in-door instrument equipment such as control valves, Transmitters, Fire and Gas Devices which are on Bien Dong offshore facilities.
Implementation of instrument maintenance program on offshore installation.
Calibration/testing of Instrument Devices.
Troubleshoot and resolve problems on instrument parts of all process/utility systems.
Report any defect or inspection report to the Electrical & Instrument Supervisor in a clear and concise manner and record all relevant information in logs as required.
Perform critical function test for instrumentations
Perform other tasks assigned by line Supervisor

Qualifications & Certifications

Industrial Electrical Technician.

Ho Chi Minh University of Technology (HUTEC), Industrial Electrical

accordance

Ho Chi Minh University of Technology

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Are you sure that you want to leave?