As a qualified M.Tech [Structural Engineering] from Indian Institute of Technology Guwahati, I am a self starter and work to the best of my capacity and capability.I work equally well independently, or as a member of a team and very much enjoy being exposed to new knowledge opportunities and sharing my knowledge with others.
Earthquake engineering literary workshop
Indian Institute of Technology, Kanpur
June 2011 - June 2011
Got to know various aspect of earthquake engineering, current research development experimental setups, various publications etc.
M.Tech in Structural Engineering
Indian Institute of Technology, Guwahati
July 2010 - July 2010
MY M.TECH THESIS
Seismic behaviour of slab column connection of reinforced concrete flat plate building.
Following work has been carried out:
a) Linear analysis
b) Pushover analysis
c)Time history analysis.
In linear analysis, The building is modeled in SAP 2000 (V 15.0) is analyzed to identify the critical regions of high shear and moment
concentration. Upon identification of these critical regions, the connection is designed as per both the design codes IS-456 2000 and ACI-318. Finally, non linear static analysis is
undertaken for the designed section to find out the influence of displacement controlled
pushover analysis in X & Y direction by assigning Lumped plastic hinges in columns and
confinement in slab to study various parameters on bending stresses punching shear capacity and pushover limits,
Based on the time history analyses (mentioned above), the influence of
percentage of longitudinal reinforcement on punching shear capacity will be investigated
through a parametric study therefore to prescribe design guidelines for safe construction of
flat plate systems in seismic zones.If possible, a sub-assemblage of slab-column connection
will be modelled and nonlinear static analysis will also be carried out in the program Open
Samiah group of constructions
June 2009 - July 2010
Undergone one month training at Samiah group of Constructions in Aligarh,UP on
Multistoreyed framed structure and finishing work
Qualifications & Certifications
Master of Technology (M.Tech.)
Bachelor of Technology (B.Tech.)
Aligarh Muslim University