Waris - Sheet Metal Worker - Saudi Arabia

Muhammad Waris

Saudi Arabia

Services

Sheet Metal Worker

Summary:

i am workon c-130 arcft pdm jeddah

Work History

sheet metal

Pakistan Air force Base Chaklala

January 2001 - February 2006

RESPONSIBILITIES:
1 I have extensive Knowledge and vast experience of Field /Ievel structural repairs, inspections, Modifications and designing of repair schemes.
1 Have an extensive Knowledge and practical experience of USAF Programmed Depot Maintenance package, to 1C-130A-3 SMP 583, SMP 515 C To 1-1A-8.
1 Performed modifications major structural fitting / parts replacement and Outer Wing improvement program of C-130 Aircraft by employing latest procedures and techniques during PDM inspection. .
1 Flight Deck Chine Plates and Main Landing Chine Caps, Main Landing gear beam doublers and Brackets.
1 Replacements of Lower longer on end Fitting at Flight Station 737 and Flight Station 1041.5, outer Wing rainbow, Corner, Engine Truss Mounts, Drag Sandwich and Pylon fitting.

6 Field/Depot level Structure Inspection and Repairs of C-130 Aircraft in PDM. Maintenance Package(.Bending, beading and flair aircraft tubes, Pylon fitting Flap tracks stiffener Bulkhead, Engine truss mounts, Structural re-enforcement at upper fuselage pressure bulkhead, Parts replacement and fatigue critical locations.
6 Repairs forward Fuselage chine plates, pilot and co-pilot seat tracks, center fuselage, upper bulk head and lower bulk head and replacement of landing gear area.
6 Replacement/repair of Para trooping door, corner fitting.
7 Replacement of sloppy longeron.
8 Replace of Main landing gear beam.
9 Replacement of main landing gear track angle.
10 Replacement of engine truss mounts.

IN GENERAL ENGINEERING SHOP:
1 Preparation of aircraft structure repair Scheme Which Not Mention in Structural Manual 130 A-3.
1 Material management and forecasting of structural part, hardware, tool and maintaining of technical store.
1 Manufacturing/Maintenance of aerospace ground support equipment.
1 Maintenance management and Technical documentation.
1 Compliance of Structure related latest Time Compliance Technical Order/Service Buellton of C-130 aircraft.
1 To Maintain Work Shop Machinery like...

General Maintenance (Machinist)

Pakistan Air force Lahore

April 1996 - December 2000

RESPONSIBILITY:
1 Material management and forecasting of structural part, hardware, tool and maintaining of technical store.
1 Manufacturing/Maintenance of aerospace ground support equipment.
1 Bending, beading and flair aircraft tubes.
1 Maintenance management and Technical documentation.
1 Compliance of Structure related latest Time Compliance Technical Order.
1 Fabrication of ground support equipments Service.

Aircraft Structure Technician in PDM/Shop

Pakistan Air force Base Chaklala

March 1990 - April 1996

Organization: Pakistan Air force Base Chaklala.

RESPONSIBILITY:
1 Inspection repair forward Fuselage chine plates, center fuselage, Pilot and Co-Pilot Seat tracks, upper bulk Head and lower bulk head.
1 Inspection/rectification and replacement of landing gear area, Para Trooping corner fitting and longer on.
1 Inspection/ repair of aft fuselage, ramps door, upper and lower bulkhead, outer wing improvement Program.

4 Inspection /repair of outer wing, flaps as well as all flight controls, wing, wing ribs and wing spars.
4 Inspection/removal/repaired and installation of engine chesses, engine trust mounts.
4 Fabrication of Aircraft parts, skin panels etc.
4 Fabrication of ground support equipments.
4 Experience in corrosion control and type of solvents used to removed the corrosion on C-130 Aircraft (B & E Series).
4 Well Experience about Electric, Gas, Organ Arc and Tig Welding.
4 Fully trained of C-130 Aircraft structure repair.

Metal worker/ Machinist in General engineering shop

Pakistan Air force Base Faisal

February 1986 - January 1990

Organization: Pakistan Air force Base Faisal.

RESPONSIBILITY:
1 Working as a metal worker/machinist in shop and 102 Aero Engineering depot at Jet engine overhauling shop to repair manufacturing the engine parts.
1 Repair /Manufacturing Ground equipments/Vehicle body and engine spares parts.
1 Responsible to maintain the machine, tools on different shops.
1 Responsible to update the training program and maintaining the record the technical manual.

Metal worker

Pakistan Air force Base Peshawar

RESPONSIBILITY:
Inspection repaired and manufacturing of Aircraft skin parts sheet work, metal work and M.T Vehicle body repairing/finishing.

Qualifications & Certifications

govt high school jarah karnana

karachi

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×