Ali - Painting Supervisor - Dammam, Eastern Province, Saudi Arabia

Mohammed Ali

Dammam, Eastern Province, Saudi Arabia

Services

Painting Supervisor

Summary:

 21 Years of Work Experience in the field of Abrasive Blasting /Lining & Coating

Work History

QC Inspector Painting

Good Painting Practice

From August 2010

(Training) from Saudi Industrial Paint Company (SIPCO).
Name of Company / Country: M.S. Al Suwaidi Industrial Services (SIS), K.S.A.
Position Held: QC Inspector Painting
Period: From August 2010 to Till Date
Project: E/C Bulk Plant Additional Capacity Phase-II ( ARAMCO) BI-10-00612

Contractor - DAELIM & FLUOR

Saudi Kayan Polycarbonate Project

February 2008 - August 2010

Job Responsibility: * Verification of painting requirement for different paint system on piping according to the client specification and monitoring the application of correct paint system. * Inspect surfaces after blast cleaning. (Grade of cleanliness and profile). * Inspection of Painting works for all structures and pipes at the site. * Checking the blasting & painting equipment condition. * Monitoring climatic conditions, surface preparation and paint mixing, checking wet film thickness of the coatings. * Measurement of WFT& DFT on each coats applied. * Well versed in using all inspection instruments and tools. * Schedule pre inspection meeting and in process inspection at vendor facilities and monitoring it review the inspection * Holiday testing of underground FBE coating pipes External carried out pin hole/ wet sponge test fur the tank internally prior to box up. * Carried out Pinhole / wets sponge test fur the tank internally prior no box up. * Inspection, testing documentation and all related jobs painting and coating procedures. * Detecting coating defects and making timely correction. * Communicating with the workers and seniors painting faculties. * Responsible for mechanical and civil painting works. * Responsible for blasting and painting of tank vessels and pipelines.

Assist Painting Q C

M.S. AL Suwaidi Industrial Services (SIS) K. S. A

February 2005 - December 2007

Period: February 2005 to December 2007
Project: Saudi Aramco - Upgrade Waste Water Treatment @ Rastanura & Jauyma, K.S.A.
Job Responsibility: * Responsible for supervising blasting and painting activities, coordination with mechanical team for identifying the different paint system to be applied as per project requirement and priority. * Monitoring of relative humidity before painting. * Understanding the manufactures paint data sheet, project specification and required standards. * Responsible for mechanical and civil works. * Well versed in using all inspection instruments and tools. * Detecting coating defects and making workers and senior painting faculties. * Monitoring climatic conditions, surface preparation, and paint mixing, checking wet film thickness of the coatings.

QC Inspector Painting

SAIC

Job Responsibility: * Familiar with Saudi Aramco Standards -Schedule 'Q', SAMSS, SAES, SAEP etc. and other international standards. * Verification of painting requirement for different paint system on piping according to the client specification and mentioning the application of correct paint system. * Material receiving and verification records, as per SATIP-H-100-01&- 002-06,SAIC-H-2024. * Responsible to Qualification records of all coating personnel. * Equipment inspection check list according to SAIC-H-2026 & SATR-2004. * To maintain valid calibration status for all inspection instrument meant for Blasting/Painting inspection. * Checking the blasting & painting Equipment condition. * Check dew point, relative humidity and steel temperature daily as required & record the log book & SATR-H-2006. * Inspection of surface preparation and painting material on receipt at store evaluation of the material certificate. * Schedule pre inspection meeting and in process inspection at vendor facilities and monitoring it review the inspection. * Responsible to fill and maintain checklist for Blasting/Painting. * Inspection of blasting. Materials. For cleanliness and anchor profile. * Ensuring Blasting/ Painting activities are carried out as per the relevant specification and as per the schedule. * Inspection of Blasting/painting activities at every identified stage as per QCP and preparation of inspection report. * Measurement of WFT films and DFT films on each coat applied. * Holiday testing of underground FBE coating pipes External carried out pin hole. * Carried out Pinhole / wets sponge test fur the tank internally prior no box up. * Effective workmen control to extract maximum output and efficiency. * Preparation and documentation of inspection reports. Surface preparation and painting instruments used: ✓ Whirling Hygrometer ✓ Magnetic thermometer ✓ Profile micrometer ✓ Dew point monitor ✓ Dry film thickness gauge (SSPC-PA-1...

QC Inspector Painting

M.S. AL Suwaidi Industrial Services (SIS) , K. S. A

April 2004 - January 2005

Project: Voest Alphane HADEED Conveyor Upgrading Project
Job Responsibility: * Inspection of surface preparation and painting material on receipt at store and evaluation of the material certificates. * Inspection of storage condition and usage of painting materials. * Verification of painting requirement for the deferent paint system on piping, structural etc. according to the client specification and monitoring the application of correct paint system. * Checking the blasting and painting equipment conditions. * Measurement of climatic condition such as ambient temperature, substrate temperature, relative humidity and dew point etc. * Inspection of prepared materials for cleanliness and profile. * Monitoring the maintenance proper coating intervals between coats. * Measurement of wet films and dry films on each coat applied * Visual Inspection of coated surface for defects. * Preparation and documentation of inspection reports. * Coordination with client inspectors.

General F/M Sandblasting & Painting / QC Inspector

M.S. AL Suwaidi Industrial Services (SIS), K. S. A

February 2003 - March 2004

Period: February 2003 to March 2004
Project: Petrokemya Butene 3 @ Jubail, K.S.A (T P L Project)
Job Responsibilities: * Responsible for supervising blasting and painting activities, coordination with mechanical team for identifying the different paint system to be applied as per project requirement and priority. * Set up, maintain & trouble shoot abrasive blasting and coating equipment including establishing proper blast nozzle pressure, inspect moisture / oil separators, use proper solvent cleaning techniques obtain correct surface profiles and cleanliness levels and establish correct spray patterns. * Demonstrate proper use of material & techniques for mixing. * Monitoring of relative humidity before painting. * Understanding the manufactures paint data sheet, project specification and required standards. * Responsible for mechanical and civil works. * Well versed in using all inspection instruments and tools. * Detecting coating defects and making workers and senior painting faculties. * Quality, Safety & Quantity improving.
Name of Company/Country: M.S. AL Suwaidi Industrial Services (SIS), K. S. A.
Position Held: F/M Sandblasting & Painting

NAPIS

January 2002 - January 2003

-748) BI-10-03549 (Dhahran, Safaniya, Al Jouf, Turaif & Al Hasa)
Job Responsibility: * Verify that the paint /coating has been mixed and applied in accordance with the relevant specification and /manufacture's recommendation. * Responsible for blasting and painting of tank vessels and pipelines. * Monitoring of relative humidity before painting. * Check WFT & DFT reading * Detecting coating defects and making timely correction. * Setting up and maintaining trouble shooting of abrasive blasting and spray printing equipments checking the brush marks sags runs. * Identification and segregation of pipe spools as per the painting system.
Name of Company/ Country: M.S. AL Suwaidi Industrial Services (SIS) ,K. S. A.
Position Held: F/M, Sandblasting & Painting

M. S. AL Suwaidi Industrial Services (SIS), K. S. A

February 2001 - January 2002

Project: Al Baytar Expansion Project, Jubail (SABIC)
Job Responsibilities: * Responsible e for supervising blasting and painting activities, coordination with mechanical team for identifying the different paint system to be applied as per the project requirement and priority. * Monitoring of relative humidity before painting. * Understanding the manufactures paint data sheet, project specification and required standards. * Detecting coating defects and making timely correction. * Communications with the workers and senior painting faculties.
Name of Company/ Country: M. S. AL Suwaidi Industrial Services (SIS), K. S. A.
Position Held: F/M, Sandblasting & Painting

Petrokemya Ethylene Project (SABIC)

March 1999 - February 2001

Job Responsibilities: * Responsible for mechanical and civil painting works. * Well versed in using all inspection instruments and tools. * Setting up and maintaining trouble shooting of abrasive blasting and spray painting equipments. * Communication with the workers and senior painting faculties * Implementing safety and guidelines in the paint shop and on site. * Monitoring of relative humidity before painting. * Understanding the manufacturers paint data sheet, project specification and require standards. * Setting up and maintaining trouble shooting of abrasive blasting and spray painting equipments.
Name of Company/ Country: M. S. AL - Suwaidi Industrial Services (SIS) K. S. A.
Position Held: F/M, Sandblasting & Painting

Hadeed Saudi Devy Project & Model

February 1997 - January 1999

A,B,C Sea Water Station, Oxidation Plant.
Job Responsibilities: * Responsible for sandblasting & painting in co ordination with client. * Quality, Safety & Quantity improving. * Implementing safety and guidelines in the paint shop and on site. * Understanding the manufactures paint data sheet, project specification and required standards. * A smooth working environment.
Name of Company/ Country: M. S. AL Suwaidi Industrial Services (SIS) K. S. A.
Position Held: F/M, Sandblasting & Painting

Brown & Root, Jubail

February 1996 - January 1997

Project: Sadaf Ethylene Expansion Project for Brown & Root, Jubail.
Job Responsibilities: * Responsible for blasting and painting of tank vessels and pipelines. * Monitoring of relative humidity before painting. * Detecting coating defects and making timely correction. * Set up blasting equipment including proper grouting. * Proper paint mixing & application technique.
Name of Company/ Country: M. S. AL Suwaidi Industrial Services (SIS), K. S. A.
Position Held: F/M, Sandblasting & Painting

Group Leader

BHP Engineering Ltd. Australia

February 1995 - February 1996

Job Responsibilities: * Responsible for blasting and painting of tank vessels, pipelines & conveyor. * Setting up and maintaining trouble shooting of abrasive blasting and spray painting equipments. * Checking blotter test prior to abrasive cleaning * Detecting coating defects and making timely correction. * Monitoring of relative humidity before painting. * Glass flake epoxy coating and lining different type of painting system application. * Responsible for coating application various type (Zinc-rich epoxy, phenolic, epoxy polyurethane, Alkyd, Enamel, Glass flack epoxy, APCS-113A Liquid Coating and special material Throtex & Belzona. * Effect of surface profile and cleanliness on subsequences for coating.
Name of Company/ Country: Petrogas W.L.L Qatar General Petroleum Corporation & Qatar Gas Project (Chiyodha Corporation), Ras Laffan Site, Doha Qatar.
Position Held: Headman, Sandblasting & Painting (Group Leader)

113A Liquid Coating

October 1993 - December 1994

Job Responsibilities: * Setting up and maintaining trouble shooting of abrasive blasting and spray painting equipments * Responsible for blasting and painting of tank vessels and pipelines. * Monitoring the proper coating intervals between coats. * Detecting coating defects and making timely correction. * Verification of painting requirement for different paint system on piping & structural according to the client specification and monitoring the application of correct paint system. * Responsible for coating application various type ( Zinc-rich Epoxy,Phenolic,epoxy polyurethane ,Alkyd, Enamel, Glass flack Epoxy, APCS-113A Liquid Coating and special material Throtex & Belzona. * Check blasting nozzle pressure during blasting operation. * Checking blotter test prior to abrasive cleaning. * Checking weather condition daily as required & record in log book.

Qualifications & Certifications

Mechanical

College / Country

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?

   
Supported Countries
Choose your country

×