Thasthagir.H - Production Techinition - Ambattur, Chennai, TN, India

Mohamed Thasthagir.H

Ambattur, Chennai, TN, India


Production Techinition

  • Full time
  • Part time
  • One time
  • Contract
  • Temp

Work History


PH and RMV

February 2013 - April 2013

(Quality checker for overall production)
My Responsibility:
➢ LACQURE and OVER VARNISH film weight gauges calibrations.
➢ PH and RMV gauge calibration.
➢ Preparing label change report for all labels.
➢ CUP attributes checks and the coil performance.
➢ Bottom Dome staining checks if any pasteurize label is running.
➢ CAN attributes checks at the discharge of IBO and PIN OVEN (Label print Quality Checks).
➢ X-rite checks only for PEPSI labels 1 can per DECO for every 30 Min.
➢ Bar Code checks for every start up.
➢ Double rub test after PIN OVEN discharge.
➢ I/S ADHESION & BLUSHING checks after IBO.
➢ Necked CAN attributes checks for every conversion and line start up using METOP gauges.
➢ L/T (Light tester) rejects evaluation checks for every hour.
➢ PRESCO and EXTRACTOR reject evaluation checks for every hour.
➢ HIME checks for every hour.
➢ CAN DATE CODE checks for every hour.
➢ Sample CAN comparison with standard for every hour at palletizer.
➢ 50 CANS checks for every four hour referring all the above problems.
➢ Reporting the problems to the Superior if any checks fail in above mentioned and HFI the product.
➢ Conforming all finished pallets at the end of the shifts.
➢ Computing overall production to all lines at the end of every shift.
➢ Documentation of all the above checks for AUDITTINGS.
From 15/feb/2014 2nd Annual Vacation.

Production Maintenance Technician


April 2012 - April 2013

(for Decorator, Lacquer spraying machine, Necker/ Necker and palletizer) in CROWN JEDDAH BEVERAGE CAN MANUFACTURING FACTORY, P.O. Box 16626, Jeddah-21474, KINGDOM OF SAUDI ARABIA.

Company profile:
(JBCMC) is a joint venture with The Crown Cork and Seal (Middle East European Company). The two-piece can plant has the capability to print can with up to six colors including complex types. It has the flexibility to produce cans of different diameters and sizes, namely,

- 202dia: 375, 355, 330, 300 and 500ml can
- 200dia: 250, 200, 180, and 150ml can

The experience of this company to established international standards of its cans have qualified them for use by leading international soft drinks and fruit juice, and enabled JBCMC to export a considerable percentage of its production.
The combined capacity of all can-making operation exceeds 4 billion aluminum cans of various sizes.
My Responsibility:.
➢ Checking the current condition of mandrel, blanket, Plate cylinder, quality of printing and condition of M/C for every 5 min.
➢ Viscosity checks for Bottom Rim Coating (BRC) and Over varnish.
➢ Conforming the application of Over varnish (i.e., full coverage to the circumference) to the can by muffle check twice a shift.
➢ Fixing label changes settings (labels such as PEPSI, DIET PEPSI, CRYSTAL COLA, 7UP, 7UP FREE, MIRINDA CITRUS ect ) according to the production requirement pallets for each label.
➢ Checking Over varnish film weight to the can for twice a shift and maintaining constant level of varnish consumption.
➢ Checking Lacquer film weight to the can for twice a shift and maintaining constant level of lacquer consumption.
➢ Reducing the consumption of Ink, Over varnish and Lacquer for all shift as per the CROWN standard.
➢ Recording the tripping of M/C for each hour and calculating Spoilage at the end of the shift.
➢ Recording the various damaged cans by Necker/ Necker.
➢ On-site breakdown investigation and reporting.
➢ Installation and repair ect.

Qualifications & Certifications




engineering college

Thiru.Vi.Ka Higher secondary school

Thiru.Vi.Ka Higher secondary school






Skillpages has been acquired by! is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Supported Countries
Choose your country