Kabri - Weld Inspector - Kuala Lumpur, Federal Territory of Kuala Lumpur, Malaysia

Mohamad Kabri

Kuala Lumpur, Federal Territory of Kuala Lumpur, Malaysia

Services

Weld Inspector

Summary:

In my experiences was starting first cutting untill selling away module, base experiences from earth work to fabrication,installation, precommissioning till commissioning.Upstream and Downstream process. Anyway my self does'nt have any diploma just only certificate. The number two mobile RIG in the world fabricate at KHL Petroleum in Malaysia.
Thank you.
Regard.

Work History

Quality Control Inspector

Calidad Sdn. Bhd

From November 2009

Project Sumandak Development Project for Petronas Carigali Sdn.Bhd.and (SKO/SBO/PMO) Design, Supply, Installation and Commissioning Of Chemical Injection Skid and Accessories.

Rules & Responsibilities:
1. Conduct WPS and release with welding Engineer and submit to NDT take off.
2. Inspect and check of the materials receiving and inspect material marked and cutting as per approved drawing during fabrication.
3. Conduct Quality Surveillance & Inspection to meet the PQP and ITP requirements.
4. Liaise with NDT Coordinator on NDT take off.
5. Produce Inspection request & follow up.
6. Coordinate & follow up NDT and Dimensional requirements.
7. Coordinate repair work & follow on re-NDT after successful review.
8. Produce & compile all associated inspection reports such as; MVR, FU, VIS & WIS
9. Conduct WQT as per the approved WPS requirement.
10. Review Hydro-test Packs to provide QC & NDT Clearance including confirmation on material traceability.
11. Member of the Audit Team-Conduct Internal Audit as per the Project Quality Plan.
12. Assist in E&I installation and the rectification of any NCR.
13. Conduct line check & all tanks are ready to hydro-test & re-instatement test.
14. Witness hydro-test & re-instatement test.
15. Compile all QC relate documents for readiness on Final Doc Compilation.
16. Attend daily QAQC & NDT progress meeting
17. Liaise with Project Engineer on issues associated with site changes & red-line marking.

Quality Control Supervisor

Boustead Heavy Industries Construction Petroleum (BHICP)

January 2008 - November 2009

Project Muda Living Quarter for CPOC Petronas Carigali BHD.
ExxonMobil Exploration and Production Malaysia Inc. ( EMEPMI )
Procurement, Fabrication, Testing, Load-out, Tie-Down, Offshore Hook up- And Commissioning Of Guntong-A Flare Boom.

Rules & Responsibilities:
1. Monitor and conducts all QC at fabrication works are follow Quality Surveillance & Inspection to meet the PQP and ITP requirements.
2. Monitoring all Inspection request & follow up all the fabrication work are been prepared success full marked cut and fit-up at hanger.
3. Liaise with NDT Coordinator on NDT take off all of NDT requirement before or after welding and any of repairing work.
4. Coordinate with Sub Contracture of any fabrication works & follow up NDT requirements have been done and reported by QC.
5. Liaise with material QC when any materials have to transfer from hanger to assembly place or from the storage place before fabrication. Placing all the surplus material at mandatory storage and recorded.
6. Liaise with dimensional surveyor again leveling, dimensional, straightness, square ness before or after welding work and review the report.
Coordinate with QC any repair work & follow on re-NDT after successful review by client QC and QC make reported.
7. Produce & compile all associated inspection reports such as; MVR.FU, VIS & WIS and NDT report.
8. Monitor the QC to conduct WQT as per the approved WPS requirement PQP, ITP and NDT standard been recorded.
9. Review Hydro-test Packages to provide QC & NDT Clearance including confirmation on material traceability.
10. Monitor all punch listing the line check prior to hydro-test & re-instatement test.
11. Monitor and conduct QC for flushing or hydro-test & re-instatement test.
12. Monitor all compilation and related documents for readiness on Final Doc Compilation.
13. Monitoring and understanding of any architecture works; Hilly Deck, sea water system, fire alarm system, air conditioning and ventilation systems (HVAC), electrical...

Structure and Piping QC Welding Inspector

KENCANA TORSCO SDN.BHD

January 2007 - December 2008

Project PROSAFE, Azurite FPDSO Project 379

Roles & Responsibilities:
1. Conduct Quality Surveillance & Inspection to meet the PQP and ITP requirements.
2. Liaise with NDT Coordinator on NDT take off.
3. Produce Inspection request & follow up.
4. Coordinate & follow up NDT and Dimensional requirements.
5. Coordinate any repair work & follow on re-NDT successful review by client.
6. Produce & compile all associated inspection report such as; MVR, FU, VIS & WIS.
7. Conduct WQT as per the approved WPS and liaise with Welding Engineer any of the welding and welding parameter.
8. Assist in the rectification of any NCR.
9. Member of Audit Team-Conduct Internal Audit as per the Project Quality Plan.
10. Review Hydro-test Packs to provide QC & NDT Clearance including confirmation on material traceability.
11. Member of the Audit Team- Conduct Internal Audit as per the Project Quality Plan.
12. Assist in the rectification of NCR.
13. Conduct line check prior to hydro-test & re-instatement test.
14. Witness hydro-test & re-instatement test.
15. Compile all QC relate documents for readiness on Final Doc Compilation.
16. Attend daily QAQC & NDT progress meeting
17. Liaise with Project Engineer on issues associated with site changes & red-line marking.

Structural Welding Inspector and QC

KENCANA HL SDN.BHD

January 2006 - January 2007

Project MAARI Field Development Wellhead Platform (CLOUGH)

Roles & Responsibilities:
1. Conduct WPS and release with welding Engineer and submit to NDT take off.
2. Conduct WQT as per the approved WPS requirement.
3. Inspect and check of the materials receiving and inspect material marked and cutting as per approved drawing during fabrication.
4. Check and inspect fit-up activities are followed ITP.
5. Monitoring and inspect all welding activities e.g. welding parameter as per WPS and ITP Standard.
6. Check and review approved drawing.
7. Monitoring any repair works (Faring, Re-Welding and Buttering).
8. Review produce as per client requirement.
9. Compiling MDR (Manufacturing data Report and do monitoring repair works of Crack or Distortion material during or before).
10. Reviewed Visual Inspection report.
11. Leveling, Dimension Check, to check levelness, straightness, square ness, and dimension before and after welding. Review Dimensional Report.
12. Visual inspection after welding, to check the joint are clean, cap profile or the weldment condition (clean, no surface defect and follow the specs of AWS or client acceptance criteria).
13. NDT examination, to prepare NDT request, arrange NDT examination (DPI, MPI, UT, and RT). Reviewed NDT report and update NDT status.
14. Produce and control all QC Inspection Report (Weld Summary) for final document compilation

Quality Control Inspector for (Piping & Mechanical)

GLOBAL FABRICATIONS SDN.BHD

January 2005 - December 2006

Position Quality Control Inspector for (Piping & Mechanical)
Project Cendor Field Development MOPU Conversion, PETROFAC (Malaysia
PM-304) Limited

Duties & Responsibilities:
* Conduct the tank leak test, liaise with the welder supervisor any repair works and carried out the inspection with client inspector.
* Verify material / pipe fitting used as per specification.
* Ensure fabricate / installation of pipe spools as per latest ISO metric drawing.
* Carried out line check and punch listing together client inspector and main contractor inspector.
* Compilation of QC document and test record.
* Witnessed hydro-test / flushing as per specification.
* To review mechanical drawing such as lay out drawing, P & ID and Vendor drawing.
* Liaised with material Inspector for mechanical equipment inspection during receiving.
* Review all equipment documents such as manufacturing data reports and mill certificates as per manufacturer's recommended and client requirement.
* Carry out material verification, fit-up and visual inspection for equipment foundation as per specification and procedure.
* Liaised with dimensional surveyor and mechanical supervisor for levelness, position, alignment, verticality and orientation during equipment installation.
* Monitoring and record for pre and final coupling alignment for pumps.
* Monitoring and record for hydro test and leak test for mechanical equipment.
* To perform mechanical check sheet and punch list for mechanical equipment.
* NDT examination, to prepare NDT request, arrange NDT examination (DPI, MPI, UT, and RT). Reviewed NDT report and update NDT status.
* Produce and control QC inspection report for final documentation.

Quality Control Inspector for (Piping)

GLOBAL FABRICATION SDN.BHD

January 2004 - December 2005

Project Fabrication Pre-Commissioning and Load-Out of the Cliff Head 'A'
Platform (ROC OIL (WA) PTY. LTD)

Duties & Responsibilities:
* Verify material such as pipe fitting use as per specification.
* Carried out inspection such as MVR, FIT UP and Visual and update weld summary.
* Review piping drawing such as ISO and P & ID drawing.
* To check that welding consumable meet the specification and proper storage and treaded as specified by manufacturer's guide line and WPS.
* Verify piping materials with reference to detail and ISO drawing.
* To carried out natural verification inspection, fit up and visual inspection and review all the report.
* To ensure welding is perform as per WPS.
* To ensure fabrication and erection of piping as per ISO and P & ID drawing.
* Liaised with NDT coordinator for NDT request and arrange the NDT activities line check and punch list for piping system as per ISO drawing and P & ID.
* Monitoring and record for hydrostatic testing for piping system and valve leak test as per specification.
* Produce and control all QC inspection report (weld summary) for final documentation.
* Carried out line check and punch killing.
* Witnessed hydro-test / flushing activities for various Inspection activities and do Baroscopic check.

Quality Control Inspector for (Piping)

EORICH

June 2003 - January 2004

Project Construction of Offshore Patrol Vessel (Royal Malaysian Navy)

Duties & Responsibilities:
• As mentioned above.

Quality Control Inspector (Structural)

SONG HENG ENGINEERING SDN.BHD

January 2003 - June 2003

Project Post PANAMA Crane for Pelabuhan Tanjung Pelepas
(Under IMPSA (M) Sdn. Bhd)

Duties & Responsibilities:
* Check the thickness, dimension and edge preparation of the Butt and Fillet Weld comply with the drawing and report.
* To confirm CF-MICC certificates complies with the drawing requirement.
* To update the inspection status and submit inspection request to client.
* Make it confirmation all the UT / MPI / joint to be inspected.
* Update the UT / MPI joint on every complied with the drawing requirement.
* Carry out dimension and alignment inspection complied with the drawing requirement.
* To confirm the pressure gouge calibration date and carried out the leak test (soap application on the weldment to detect for leak).
* Make the confirmation to all the above inspection and testing fully document and verified by client.

Quality Control Inspector for (Piping)

GLOBAL NEXUS L

January 2002 - December 2002

Project Resak Compressor Module 1, 2, & 3 (Petronas Carigali Sdn Bhd)

Duties & Responsibilities:
• As mentioned on above.

Quality Control Inspector for (Piping)

STERLING SUCCESS SDN.BHD

January 2001 - January 2002

Project Cakerawala Gas Field Development Project

Duties & Responsibilities:
• As mentioned on above.

E&I QC Supervisor

ABB INDUSTRIL BUILDING SYSTEM SDN.BHD

June 2000 - December 2001

Project KR2 Petronas Project, Paka, Terengganu

Duties & Responsibilities:
* Supervised, monitor and control QC coordination work involved in fabrication, installation, testing work and commissioning for electrical accessories, equipments support and electrical equipments. This involved cable ladder installation, cable pulling, installation of electrical and instrumentation equipment and finally to testing commissioning.
* To ensure all parts and equipment at site is meet the specification and installation is done according to the installation drawing and procedure.
* To work together with client to ensure all parts and equipment are following client specification and regulation standard.
* Checking and identify the quality, measurement and quality of conditions all the material and equipment at the plant area.
* Remark and make the report and finalist to the statement form.

QC Supervisor Cum. QS (E&I)

Suply to ABB INDUSTRIL BUILDING SYSTEM SDN.BHD

January 1999 - June 2000

Project KR2 Petronas, Paka, Terengganu

Duties & Responsibilities:
* Checking and identify the quality, measurement and quality of conditions all the part materials and equipments at the plant area.
* Remark and make report.

E&I QC Supervisor

KEMAMAN, TERENGGANU

January 1998 - January 1999

Project GPP 1 and Petronas Penapisan, Paka, Terengganu
Duties & Responsibilities:

1. Identify and control the testing and commissioning works for all QC personal at site field.
2. Check all materials and equipment followed the drawing and specs.
3. Remark and make summary of report.

Foreman

KOLEKSI 786 SDN.BHD

January 1997 - January 1998

Project KR2 Petronas, Paka, Terengganu

Duties & Responsibilities:
• Coordinating general worker to service at the KR -2 Plant Petronas Project doing grouting foundation field working and civil work.

Technical Supervisor

WISMA CENTRAL, JALAN

May 1995 - December 1996

Project KBI, PKNS building and others.

Duties & Responsibilities:
1. Design, install and service the net working cabling system.
2. Supply the instrument and equipment systems.
3. Supervise wiring and commissioning systems the power supply works at site area.
4. Conduct servicing works at site attend any site meeting with client and customer.

Quality Controller

METRO PACIFIC SDN.BHD

January 1993 - January 1995

Duties & Responsibilities
1. Service and check all the machineries and equipment for the factory at process area.
2. Re-arrange the work of any servicing and repairing the power and wiring system (Good Quality of Products).
3. Reviewed the product within make again the quality standard.

E&I Semi-Skill Worker

CEDELAC (M) SDN. BHD. SITE OFFICE

January 1992 - January 1993

Project Tioxide Factory Teluk Kalong Industrial Park Kemaman, Terengganu.

Duties & Responsibilities:
* Instrumentation cable laying, jointing, equipment installation and cable tray set up at plat form as construction drawing and procedure requirement.
* Commissioning for the sub-station appliances.

Project Coordinator

TAMAN SEGAR

January 1990 - January 1992

Project Civil Construction & Office Modification works for (PKNS, BSN, and ext.)

Duties & Responsibilities:
• Building contruction, renovation and interior design works (building, houses, offices, banking, other privates sector and agencies).

Technician

WONG REFRIGERATION AIR - CONDITION SDN.BHD. KG

June 1987 - December 1990

Project Air Conditioning Works: Service for PCSB Building at Kerteh and platform at the offshore, ACDC Building, Wisma Persekutuan, Wisma Darul Iman, Hospital Besar Kuala Terengganu, Offices and others sector.

Duties & Responsibilities:
• Install / servicing window unit, Split unit, Package unit, Cooling Tower unit and Chiller unit (installation, mechanical appliances services and commissioning power wiring) for building, housing and others sector.

Qualifications & Certifications

Welding Inspector 3.2

Malaysian Institute and PCN Level II

Refrigeration & Air Conditioning

Institute Technology Industries

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×