Mirzac - Pipe Fitter - Constanța, CT, Romania

Mihai Mirzac

Constanța, CT, Romania


Pipe Fitter

  • Full time
  • Part time
  • One time
  • Contract
  • Temp


i want contrct

Work History

I work in Norway to company Scandinavia S.R.L

in Torvastad, Westcon yard AS, mechanical.
2013-I work in Norway, In Maloy city to construcion. I changed the roof house.I worked to samblast 2 ships.
1 November 2013-20 December 2013-i worked at the company Royal on passager ship where i changed a fire insttalation.

TankCe A/S

From October 2011

I work in Norway, to company TankCe A/S, as pipi fitter and welder, and mechanical.

welder, and mig-mag

TankTeck A/S

April 2010 - August 2011

as pipi fitter and welder. I do support suspended 50 meters in height around the factory, line pipe from 2 inch to 7 inch pressure, railings, metal manufacturing and tanks, sheet 6 mm, 20 mm, and 2-inch pipe boilare, and many new building steel. I welded electrical welder, and mig-mag.
Annexes. Diploma, recommendations, and I.M.O courses for safty


January 2009 - April 2009

2004 srl trough IDC Europe Belgium
I work for three different company: 1) Tessenderlo Group Chemie, this is a chemical factory where made different chemical product, I work under Izo plan to fix the Teflon lined pipe, size between dn.25 to dn. 100.i fix the support for all the dimension of the pipe, I fix different kind of valve(control valve, chek valve, sumple valve). I fix the pump.I use: bolts m12 to m16, spanners, drill mashine, grunding mashine. 2):I work for a factory where I made stainless steal pipe whit size between 219mm to 1000mm, suctione sea water, I fix the pump, I fix the filter, I use spanners, grunding mashine, welding mashine, drill mashine. 3): I work for a paint factory where I fix a modern and automatically fill up paint device.I made stainless steal pipe whit size between 1 inches to 4 inches, I use grunding mashine, welding mashine, spanners, drill mashine.I fix the cleaning pump whit all additional things around.
28Mai-6septembre I work in Bravo Bemanning company I worked in Norway fishmeal factory.located in the town of Bodo in Norway.I worked on location on a plateau of ten concrete pump after I made tracks of stainless steel pipe diameter: 45ml, 50 ml, 60ml, 76ml, 84ml, 89ml, 100ml, 114ml, 150ml, 219ml, 250ml, 400ml, 600ml, 800ml.Iused stainless steel screws, flange mobile valves manually valves with electric drive, clearing rubber, and we use special sets of installations located steel.I two stainless steel tanks for waste blood fish.I worked on a boilar of 7tonnes location at a height of 3m at an angle of 15 degrees inclination after I made it 2 support this work we used 4 boilar.La hoists 2 tonnes, we used the device manual.I electric welding pipes made of iron steam plant, the shuttle boilar and I used different fittings: valves, temperature measurement devices, water and special fittings for 3 tanks manufactured aburi.I sheet Stainless, 3ml thick then leam mounted heating furnaces have pipes made 250ml of 100m length on a course...

Bonatesta Company

March 2008 - April 2008

I worked for, Bonatesta Company as mechanic at valves

SC PHEONIX Constanta trought IDC Europe Belgium

July 2008 - November 2008

--I work for a sugar factory, I made pipe line of 405mm diammiter, 219mm connecting a pumping-cooler system.I use cutting- torch, arc welding, grunding mashine and bavel mashine.I use pipe of 16 inches{405mm}and 8 inches{219mm}
--I work for a petrochimic rafinary company, I made pipe between 2inces{60mm}and 16 inces{405mm}extra-thigness, I work for repair and new construction pipe line.I use grunding mashine and special electric bavel mashine

Sannazaro Rafinery ITALIA

November 2008 - December 2008

I work in the new construction in the refinery in pumping system, I refil the pump by new oil, I make centraj for the cappling betwin pump and electric motor, I make modificatione for pipe {suctione and discharging}connecting whit the pump.I use grunding mashine
Good regards

pipe fitter

August 2007 - December 2007

on two marine research vessels, installing pipes double bottom ballast tanks, deck drainage system and tank drainage system.
10 jan 2008-15 feb
I worked for, Chammel Laird Shipyard Gibraltar as a pipe fitter exchanging stainless steel valves in the inert gas system and the LPG transport system
I worked for, Chammel Laird Shipyard Gibraltar as a pipe fitter exchanging stainless steel valves in the inert gas system and the LPG transport system

Chammel Laird

November 2006 - December 2006

in Gibraltar, wher I change the pipe, diferent dimensions,
steel pipe, stainless stel pipe and inert gas installations and oil, disel pipes.
24 jan2007-24 may 2007
worked for Chammel Laird Shipyard, Gibraltar, as a pipe fitter exchanging pipes in the fire system, hot water system, tank probes and ballast tanks.
I worked for Harispai Marine, in Brest / France, as a pipe fitter exchanging pipes in the steam boilers.

pipe fitter shypyard company


Up to March 2005

2005 Specialization:"The teory and practice of bolt tightening"-PSLESO


QHSE training For The Armada


"Offshore Safety Introduction"-Nutec-Centre for Safety
Aberdeen, Scotland


Carnival Cruise Company

September 2005 - March 2006

8 august 2006-11 oct 2006 I worked in Turkey with MICOPERI company from Italy thu the magistrale of gas in Marmara Sea, pipe dimension 900mm.

Singapore Shipyard as mechanic

August 2004 - September 2004

at valves

Pipe fitter

Bahamas Shipyard, Nedcon Shipping SRL Constanta

I was in charge with repairing all type of ships-passenger, resercing, bulkers, tankers, containers
I replaced all the pipe installations in these ships,
I repaired ballast, bilge, coolingmain Nengine, sanitary, hydraulic, fire fighting
I worked with all kind of pipes:stain, alloy, cooper, CuNi, stainless steel, PVC
I disassembled, manufactured after a drawing the pipes and then put them in the installation
I made threads, I istalled taps, shower cabins, wash
bowls, wash basins, water closets
I made trikling, I repaired the main residual water pipi on the ship
I used electrical welding, autogenously and CO2
I worked also for services installation on the passenger ships in dry dock,
cooling, hot water residual water
I worked with different typer of pipes of 6mm until 610mm

Pipe fitter

Constanta Shipyard

I worket both for new shipbuilding and repairs
I took part of the team for building oil
tankers, bulkers, cargoes, LPG, ferry boats, 2 floating docks and port containers
I was in charge with assembling ballast, cooling, fuel, oil, steam, air conditioninm, hydraulic, heating, fire fighting, bilge, ventilation installation
I assembled also the sanitary installations, I made threads and I fixed taps, shower cabins, water closets, wash bowls, wash basins
I used here electrical, CO2, autogenously welding
I worked with small pipes of 6 mm until the biggest ones of 610 mm
I repaired ballast, hydraulic installation replacing all the pipes and preparing them for the welder's team

Qualifications & Certifications

High school L.I.M. Hurdugi

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Are you sure that you want to leave?