Smith -  - Grabouw, WC, South Africa

Mick Smith

Grabouw, WC, South Africa

Work History

Electrical Superintendent

Senet

November 2013 - May 2014

Position Electrical Superintendent

My duties entailed a hand's on involvement and acceptance of contractor's progress and work performed on both existing plant and phase 2 of the project. A member of the commissioning and handover team ensuring a safe and working plant conforming to client specifications and quality
The project consisted of a ship offloading 6km conveyor line with 3 transfer stations, Mcc's, VSD's and E&I equipment affiliated to such a system
Reference B. Watts@senet. co.za ( Director )

Cape Peninsula S.A

The construction and handover of various electrical installations, industrial and domestic on a self employed basis in the Cape Peninsula S.A.

Electrical Superintendent (Power House)

SNC

My position on the project involved the supervision of construction and handover assistance with commissioning of a Power Plant consisting of three Siemens 45Mw steam generated turbines, coal conveyors, ESP units, Transformers, sub stations, 11kV, 6.6kV, 675v, 400v affiliated switchgear, plus general construction of cable racking, cable pulling, small power installations and fire detection in various zoned areas
I was also involved in the procurement of materials so as to meet scheduled programme completion dates
Reference paul.fell@snclavalin.com ( General Manager )

Electrical Superintendent

T.F.M

Underground reticulation of eight x11kV/400v Mini-Subs from two 11kV
Overhead lines feeding the mine housing and construction site accommodation, of which the wiring of the premises was also included in the contract
Also the new reticulation and new distribution from genset to permanent power of existing
mine establishments such as workshops, stores, boreholes, offices and outbuildings

Electrical Supervisor

M&R Eng Solutions

The contract entailed the installation of equipment such as conveyors, thickeners,
motors, transformers, mcc's etc and associated equipment. After inspection and
Data pack acceptance, energising and rotation checks the system was then handed over to the commissioning dept, all work carried out under the permit to work
system

Electrical Superintendent

Senet

The construction and commissioning of E & I equipment that was dismantled and shipped from Indonesia to Guinea. The equipment in question included
all aspects of electrical installations required to put the mine into production such as 11kV O/H & U/G reticulation, transformers, switchgear, Mcc's and erection of racking, cabling etc

Electrical Supervisor

M&R Eng Solutions

The project involved the upgrade of the busbar output to 352kA with forced air
cooling. My duties are to supervise/ commission and make sure a fast track job
is kept on line to make scheduled dates and quality requirements. Forty eight
37kW fans fed from 4 Mcc's are required to keep the temperature at an operating value

Electrical Supervisor

M & R Eng Solutions

My duties entailed the supervision and Pre Commissioning of the E&I Installation pertaining to modifications of Paper Machine 1.This involved replacement of over 350 various size drives, 2x11kV Transformers and 5 off ABB Mcc's with Insum Control. A new Lime Kiln installation was also under my control as well as systems handovers, data packs, as builts etc. to the client.

Electrical Supervisor

Mozal Aluminium

Construction of the Anode Handling Plant, Bake furnaces, Rodding shop, Carbon
Recycling, Transformers, Sub Stations etc, handover to client on a blue/green tag
systems procedure with all documentation such as As Builts, Data packs and signed off punch lists
All construction adhering to site safety and environmental procedures stipulated by management and client

Electrical Supervisor

Batemans

My duties involved the switching of 11kV and 400v construction/ permanent
power on O/H lines and mini subs. The job entailed the transfer of a construction
Mini-sub ring to permanent power by the energising of an 11kV consumer
Substation with twin feeders to six substations site wide.
The plant consisted of conveyors, ball mills, stacker reclaimers, crushers
Thickeners, MCCs, cable racking and cables etc, of which I co-ordinated with the
E & I contractor to sign off to the client via data packs, blue and green tag tagging and red line drawings.

Electrical Supervisor

Batemans

Greenfields/Brownfields platinum ore separation plant of eight 6.6.kV/525V
feeders and 198 various size drives, cable racks and cabling associated to conveyors, vibro feeders, thickener tanks, crushers and flotation plants fed from two
new and four existing substations.
We adhered to the permit to work system and acceptance of data packs and redlined
drawings from the contractors for handover to the client.

Electrical Inspector

SNC

Inspection of contractors' work in the Carbon Area which consisted of Bake and
Induction furnaces, Roller and Belt conveyors, Transfer and Handling cranes,
Dedusting units, Recycle silos and various other anode handling equipment.
Hands-on acceptance of electrical equipment, QC dossiers, As-Builts, mechanical
completion certificates, green tag and blue tag involvement up to practical
completion and handover to client

Electrical Supervisor

Saldhana Steel Project (S.A.)

Electrical Supervisor

F.A Platform (Gas) Offshore

Electrical Inspector

Hillside Aluminium Smelter

(Gas) Offshore Electrical Supervisor

F.A. Platform

Electrical Supervisor

F.A. Platform (Gas) Onshore

Eskom ORHVS Certificate
Installation Rules P1
Installation Rules P2
Unit Standard NQF level 4 (single phase switching cert)
Unit Standard NQF level 5 (three phase switching cert)
S.A. License No 03772

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?

   
Supported Countries
Choose your country

×