Abu Zaid - Project Controls Engineer - Cairo, Cairo Governorate, Egypt

Medhat Abu Zaid

Cairo, Cairo Governorate, Egypt

Summary

Project controls engineer , assign specific tasks to engineering Department. Supervision and guidance on design and Technical matters and monitor the progress for oil and gas projects . Report all technical requirements to project manger. Controlling all project drawings and materials by using soft ware PDMS & updating of all drawings and materials by using soft ware talisman system. Solve any Technical problems & review design calculation for piping & pressure vessels and tanks.

Services

Project Controls Engineer

  • Full time
  • Part time
  • One time
  • Contract
  • Temp

Summary:

Assign specific tasks to engineering Department. Supervision and guidance on design and Technical matters and
Monitor the progress for the project. Report all technical requirements to the project manager.
Controlling of issuing of all drawing and materials
(piping &Mechanical, Electrical & Civil), Controlling of updating of all drawings and materials or the project .
Solve any Technical problems

Work History

Title engineering manger

GPC Company

From December 2012

Duties
Assign specific tasks to engineering Department. Supervision and guidance on design and Technical matters and monitor the progress for the project. Report all technical requirements to the group engineering manger. Controlling of issuing of all drawing and materials controlling of updating of all drawings and materials or the project in system Talisman. Solve any Technical problems & review design calculation for all presser vessels.

Main Contractor

Project Habshan

July 2010 - October 2012

GASCO Project No. 5239
Title Project controls Engineer
Duties
Assign specific tasks to engineering Department. Supervision and guidance on design and Technical matters and
Monitor the progress for the project. Report all technical requirements to the project manager.
Controlling of issuing of all drawing and materials
(Mechanical, Electrical & Civil), Controlling of updating of all drawings and materials or the project in Talisman.
Solve any Technical problems
Kingdom of Saudi Arabia

Project KHAFJI FIELD DEVELOPMENT PROJECT (KFDP)

EPC of the buildings and Heavy Lifts

August 2008 - June 2010

Construction (off shore & on shore) &
Pre-commissioning works and Petrochemical Complex including: all process and
Utilities systems & Offsite Facilities, EPC of the buildings and Heavy Lifts.
Construction Duration: 32Months Client: KJO Company (Armco)
Main Contractor: CCC Location: Eastern Province Contract Value: US $ 500 Million
Title Project controls Engineer
Duties
Assign specific tasks to engineering Department. Supervision and guidance on design and Technical matters and monitor the progress for the project. Report all technical
Requirements to the project manager. Controlling of issuing of all drawing and materials
(Mechanical, Electrical & Civil) Controlling of updating of all drawings and materials or the
Project in Talisman. Solve any Technical problems with the client/consultant.

SECTION HEAD OF ENGINEERING DEPARTMENT

Project Jubail Chevron Phillips Project

August 2005 - July 2008

(JCP). Construction & Pre-commissioning works of and Petrochemical Complex including: Ethylene Utilities, Benzene, Styrene
Monomer & Offsite Facilities, EPC of the buildings and Heavy Lifts. Construction

SENIOR MECHANICAL ENGINEER

Archirodon Construction

June 2004 - July 2005

Company name: Archirodon Construction (Over seas) Co.S.A.
Position: Mechanical Construction Mahager.
Project Name: Contener Terminal Project (Port Said)
Duties & Responsibilities:
1 Coordinate for All the Mechanical Activates a-Fire Fighting System b-HVAC System
c- Water Supply System d- Sewage System e- Surface Drainage System
2 Coordinate for Piping Works & Steel Structure
3 Coordinate for All the Equipment Installation

Senior Mechanical Engineer Project Name

Archirodon Construction

August 2003 - June 2004

Qatar Petroleum M.P.B. Messaeeid Project.
Duties & Responsibilities:
1 Reviewing the Isometrics for the piping works.
2. Supervising the piping fabrication at the Site and the Workshop. 3 Supervising the Punish
list Activities. 4 Coordinate for a) Tanks and pressure vessel contractors.
b) Field & shop coating. c) Steel
Building. d) Painting & insulation

Mechanical Engineer Project Name

Archirodon Construction

February 2003 - August 2003

Toska Project Shikh Zaid Canal 3 Pumping Stations.
Duties & Responsibilities:
1 Checking the design calculations sheets and the engineering for the piping works.
2 Preparation of material requisition for (Piping and Pipe supports according to the technical
Spec.
3 Supervising the piping fabrication at the ferrometalico. Mani factor.

Senior Mechanical Engineer. Project name

CTU

January 2002 - February 2003

OHANET Development gas plant
(ALGERIA). Client: BHP BILITON. Main Contractor: ABB Lummis Global & PETROFAC
International LTD
Duties & Responsibilities:
1 Discussion of procedures & scope of works.
2 Review drawings against P&ID.
3 Solving problems with main contractor.
4 Solving construction problems on site.
5 Inspection mechanical works activities progress.
6 Following compliance of several works activities as per scheduled dates to deliver it to pre-commissioning.

Mechanical Engineer

Saudi Condreco Ltd. in association

December 2000 - January 2002

With Almabani General Contractors Co.
(ALMACON) Position: Senior
Mechanical Engineer
Project name: P&C of Upgrade of Reverse Osmosis and SupportFacilities (Contract No.
073-C14) Royal Commission for Jubail Project
Duties & Responsibilities:
1 Fabrication and Erection of RTR Pipe Lines and S.Steel Lines.
2 Install equipment (Pumps, Filters, Vessels, etc.).
3 Coordinator for Tank Works.
4 Tie-in connection for new RTR and S.Steel with existing lines.
5 Hydro test for Pipe lines.
6 Follow up for Mechanical Punch List.
7 Commissioning and Start up for the Water Treatment Plants.

Mechanical Engineer Project Name

Archirodon Construction

September 1999 - December 2000

Mitap petroleum products & coke loading Facility
Duties & Responsibilities:
1 Review & Check the Isometrics and shop Detail Drawings for (Piping, Steel Tanks,
Pressure vessels and Pipe supports).
2 Coordinate for a) Tanks and pressure vessel contractors') Field & shop coating. c)
Steel building. d) Painting & insulation.
3 Checking the design calculations sheets and the engineering for the pressure vessels.
4 Preparation of material requisition for (Piping, Pipe supports, Tanks, Pressure vessels and
Steel STR.) Including technical spec. acc. To different codes and standards.
5 Review the test packages prior for testing, Punch list, per. Commissioning & As Built
Drawings.

Title Office Engineer (Mechanical)

Saudi Yanbu Petrochemical Co

September 1998 - August 1999

Sep 1998 - August 1999
Project YANBET Expansion Ethylene Facilities (YEEF). Complete construction of Ethylene
facilities with a capacity of 760,000 MTA. Scope includes civil Works, piping, steel and heavy equipment erection, painting, insulation plus electrical and instrumentation works.
Client: Saudi Yanbu Petrochemical Co.
Value: US$ 113 Million.
Title Office Engineer (Mechanical).
Duties Supervision and guidance on design and Technical matters and monitor
The progress for the project. Report all technical requirements to the
Project manager. Controlling of issuing of all drawing and materials
(Mechnical, Electrical, Civil), Controlling of updating of all drawings and
Materials or the project in Talisman. Solve any Technical problems with the client/consultant.

Title Office Engineer (Mechanical)

Project AROMAX BENZENE & CYCLOHEXANE Facilities Project - Jubail

June 1997 - August 1998

(SCPP).
Scope involves the engineering, procurement, construction and commissioning of a
Grass-root, 480,000 MT/year of Benzene and 220,000 MT/year of Cyclohexane
Facility at Jubail. Scope also involves construction management of the
Administration building. Client: Chevron Petrochemical / Chiyoda. Value: US
$ 75 Million.
Title Office Engineer (Mechanical).
Duties Supervision and guidance on disgn and Technical matters and monitor the progress for the project. Report all technical requirements to the
Project manager. Controlling of issuing of all drawing and materials
(Mechnical, Electrical, Civil), Controlling of updating of all drawings and
Materials or the project in Talisman. Solve any Technical problems with
The client/consultant.

• Non CCC Experience
United Arab Emirates
.IMCC GROUP EXPERIENCE

Senior Technical Office Engineer

Alex. P.Co

September 1991 - May 1997

(Mechanical)Projects Name: 1) Extract flash tower for (Alex. P.Co.)
2) 5 various equipment "Pressure vessels, filters, coolers, heat
Exchanger"
For (Naser P. Co.). 3) No. "5" press. Vessels for (Naser P. Co.). 4)
No. "3" 36 Doublex filter strainer for (Sumed P. Co.). 5) Low press.
Heaters & H. press. Heaters and Dearators at (side krir &
ayhon moussa power plant units) for Egyptian Electricity
Authority.
Duties and responsibilities:
1 Review and check contract point
2 Review of specifications requirements.
3 Review and check of assembly and work shop details drawing.{Piping&Steel STR.}
4 Preparation of material requisitions including technical specification acc. to different
codes and standards.
5 Studying for Mat. Technical offers and preparation Tech. Reports.

Senior Site Engineer. (Mechanical)

Petrojet

August 1985 - August 1991

Projects Name:
1) Petroleum refining for (Suze P. Co.). 2) Coating manufactory (Petrojet). 3)
Tank patary reshaping (for Petrobel Co.). 4) Compressor connection unit for (Suco
P. Co.). 5) Fire house station for (Suco P. Co.). 6) Suze and Chukar Pipelines (Pipeline
P.Co.). 7) Ammonia plant for (Semadco Suze Co.).
Duties and responsibilities:
1 Review and check contract points and the specification requirements.
2 Preparation of Material Requisitions.
3 Review and check the drawings. (Isometric and Prepare Shop Drawings)
4 Fabrication and erection spools C.S. & S.Steel.
5 Distribution of F. Weld connections at piping isometric.
6 Install equipment (Vessels, Tanks & Towers, Heat Exchangers, etc.)

Main Contractor

Jubail Chevron Phillips Company

JGC Arabia Ltd. Location: Eastern Province Contract Value: US $ 100 Million
Title Project Engineering Manager
Duties Assign specific tasks to engineering Department. Supervision and
Guidance on design and Technical matters and monitor the progress for
The project. Report all technical requirements to the project manager.
Controlling of issuing of all drawing and materials (Mechnical, Electrical, Civil),
Controlling of updating of all drawings and materials or the project in Talisman.
Solve any Technical problems with the client/consultant.

Qualifications & Certifications

Bachelor of Science in Mechanical Engineering -year 1982

Mechanical Engineering

Monofia University

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×