I Md. Hanif working with Oman Drydock company. I am engaged with the company with operation and maintenance of – STP, Incineration plant, Chemical Waste Water Treatment Plant, Slope & Sludge Plant. I have solid working experience on fuel oil Tank firm operation, fuel oil tanker ship handling, machine tools operation & manual arc welding sector.
I have completed Oil & Petrochemical Industrial Safety Course for supervisor under NTUC learning Hub, Singapore, Shipyard safety instruction course under Jurong Shipyard, Singapore & CNC Turning under Institute of Technical Engineering ,Singapore.
I am also able to operate heavy forklift, JCB and bobcat.
Incineration Plant Operator
Oman Drydock Company S.A.O.C
From August 2012
Name of Company: Oman Drydock Company S.A.O.C
Address: P.O. Box-3972, Ruwi, P.C-112, Muscat, Sultanate of Oman.
Contract: (+968) 25210000, Fax No: (+968) 25210120
Oman Drydock Company is the largest ship building, ship conversion and ship Repair Company in the gulf country. I am working with the company as a plant operator under production support department. Mainly I am engage with operation and maintenance of Incineration plant, Chemical waste water treatment plant, sewage treatment plant (Manual & PLC operated). As a production support people and for the smooth operation I also need to operate Heavy duty forklift, JCB & Bobcat.
Senior Engineer (Bunkering)
100MW Power Plant
May 2011 - July 2012
Address: Plot No: 68, Block: H, Road No:11, Banani, Dhaka, Bangladesh.
Contract: 88 02 8838001, 8861117, Fax No: 8802 8836868
Acorn Infrastructure Services Ltd is a 100MW Diesel/Heavy Fuel Oil based power plant. It is a sister concern company of CATTER PILLAR. The company mainly working in power generation, Power plant construction, sales service and overhualing and utilities sector.
I am working with the company as a In-charge of Fuel Management. Mainly responsible for total plant fuel Management (HFO, Diesel, Lube Oil, Waste Oil, Chemicals & Grease) also responsible for the maintenance and overhualing of all equipment which is related with fuel loading/unloading system like IMO Pump. Gear pump. Gate V/V, Glove V/V, Safety V/V, Butter fly V/V, Kidney Lube Oil Pump, Portable LO/LFO Pump, Diafirm Pump , sludge P/P, changing of oil filter and stainer, Etc.
In a 100MW power plant a lot of waste generates everyday like- Oily rags, papers, wooden solids, kitchen waste, grasses, cartons etc. To keep the plant envoronments neat and clean there was an incinerator to destroy the waste.
The exhaust gas we are using to heat the thermal oil in the thermal oil storage tank also we were using the exhaust to free heat the auxiliary boilers feed water when required.
Following activites are included under incinerator operation:
1. Collect all waste and saperate it as per grade
2. Keep the record of tonnages and calculate the % of ash
3. Destroy as per waste incoming load
4. Do the schedule maintenance
5. Maintain the log book and keep record of all works
6. Collect all ash and dump in appropriate place with following environmental rules.
7. Control the labour, technician and help them to complete the assignment accurately.
Ensuring 100% safety to avoid any environmental pollution, spillage, over flow or any fire accident. To make report and submit to authority is one of my important jobs.
Brave Royal Ship Management
February 2010 - April 2011
Name of Company: Brave Royal Ship Management (BD) Ltd,
Address: Kabir Monjil, SK Mojib Road, Agrabad C/A,
Brave Royal Ship Management (BD) Ltd is one of the largest ships owning and management company in Bangladesh. This company has total twelve foreign going cargo vessels & four Lighter vessels. This company also have two larges ship breaking yard in Bangladesh. Key responsibilities with the company was to assist the Ship repair Superintendent to manage whole technical assignment onshore/offshore as well as overseas. Some of the job descriptions are given below:
1. Visit the ship and find out the problem as per repair list/ out of list
2. Discuss with the respective Superintendent regarding the repair work
3. Stay offshore to planning, cost calculation, discuss with the engineers & officers regarding hazards & Risk assessment.
4. Issue the work order to the enlisted repair workshop
5. Continue monitor the vessel to check the quality of work & time to time report to the superintendent & Technical manager
6. Check & update all the Certificates
7. Look after survey and cimmissoning of Crane, Loose gear, life boat, David, LAS/FFA equipment, lifting gears and appliances etc.
8. Procured all the spares of Deck , Engine, Boiler, Compressor & Crane
9. Procured all the Store items of Deck & Engine
10. Procured all the Provision, Saloon, Stationary, IT& Bond items
11. Record keeping for all work as per ISM Requirements
12. Make ready the ship for Survey & attend on the vessel with class surveyor
13. Make ready the ship for Dry Docking
14. Overseas support when required
15. Attend in the bunkering program of- HFO/LFO/LO/MGO etc
Assistant Service Engineer
Prantik Marine Services Pvt. Ltd
September 2008 - February 2010
Name of Company: Prantik Marine Services Pvt. Ltd,
Address: Akhtaruzzaman Center, (7th Floor), 21/22 Agrabad C/A,
PRANTIK Marine Services Limited is a Marine survey & Commissioning company. Also very much familiar for ship repair (Mechanical, Electrical, Hull & Structural)
Responsibilities with Prantik:
1. Survey & Comissoning of Cargo crane, derik, overhead crane, portable crane, with all loose gear like- wire rope, lifting belt, Shakle, hook, swivel, snetch block, chain block, I bolt,
2. Mechanical Fitting: Hyd. Winch overhauling, pump overhauling , oil purifier overhauling , many type of oil seal & o-ring changing, many type of pully and snatch block changing etc,
3. Steel Fitting: Hatch cover damage plate changing, coming stand changing, forward shell plate changing, mushroom vent changing, hydraulic pipe line changing, accommodation plate changing, galley door fabricating, side tank plate changing, man hole cover making etc.
4. Load Testing: Mobile crane, Cargo crane, overhead crane, wire rope, lifting belt & all types of lifting gears by water weight bag and digital load cell.
5. Life Boat Testing: Annual inspection, David testing, dynamic testing & load testing.
6. Spares & stores procurement
1I. Position: Machinist
Jurong Ship Yard Pte Ltd
October 2005 - August 2008
Key responsibilities was in Jurong Shipyard were to operate machine tools to servicing & repairing valves, oil tools, pump, winch, break lash, hydraulics tools etc. Some of the job descriptions are given below:
A. Center Lathe Machine:
Facing, Step turning, Taper turning, Eccentric turning, knurling, Threading, Boring, Drilling, Reaming etc.
B. Milling Machine (Horizontal & Vertical):
Plane surface & step surface milling, slot milling(square, half round, T-slot) , key way cutting(straight, taper & woodrup), gear cutting etc.
C. Shaper Machine:
Plane shaping, step shaping, key way cutting, taper slip making, square, hexagon, octagon cutting etc.
D. Drilling Machine: (Pillar, Radial & Universal)
Many type's of flange's as per PCD & no of hole drilling ( Up to 95mm), M/C tapping, counter sinking, reaming, spot facing, taper & strait pin removing, broken stud removing and re-tapping, angle drilling etc.
Magnetic drilling (14mm to 80mm)
E. Insitu Machining:
In the marine technology insitu machining is most critical & more valuable job. Some job of the ship need machining but it is fixed with the ships body or engine or the jod 100% impossible to bring in the workshop. These types of jobs are doing by some special technology with some special tools. Mainly I did Rudder pindle housing booring, drilling on the deck, broken stud removing, I pcs machining, pneumatic polishing, magnetic drill machine operating etc.
Shafiul Alam Steel Mills Ltd
August 2003 - September 2005
Name of Company: Shafiul Alam Steel Mills Ltd,
Address: Hodgora, Durgapur, Kotwali, Comilla , Bangladesh,
Telephone No: 88 081 911730 / 88 01670911370
This is my probationary job. I was engaged with the company for trouble shooting, servicing & repairing of valves, gear oil pumps, centrifugal pump, many types of pump & motor alignment checking, steel re-rolling mill maintenance was my important job. Some of the job descriptions are given below:
A. Many types of valve assembling, disassembling & reappearing
B. Hydraulic Jack overhauling
C. Oil distribution line making to lubricant the rolls in the steel mill
D. Bearing assembling & disassembling
E. Gearbox installation & repairing
F. Water supply line making
G. Centrifugal pumps overhauling
H. Rotary Shearing machine maintenance
I. Screw type compressor maintenance
J. Lifting table maintenance
K. Oxygen & Natural gas supply line making
L. Oxygen & Natural gas supply line making &
M. Mechanical pusher maintenance was my important Job
6. Personal particular:
c. Permanent Address: # Village: Dhannapur , #P.O.: Dhanamear Bazar
#P.S: Sadar, # District: Noakhali , Bangladesh
Contact No:88 01843492589 ( .
e .Nationality: Bangladeshi By birth
f. Religion: Islam
g. Marital Status: Married
h. Language Known: Bangla, English & Hindi
I .Height: 5' 4"
j. Weight: 60 Kgs
Qualifications & Certifications
Bangladesh Technical Education Board
Oil & Petrochemical Industrial Safety Supervisors
CNC TURNING under Institute of Technical Education