- Full time
- Part time
- One time
CAE Moldflow Engineer
Polysmart Technologies Pvt Ltd
From February 2011
CAE Analyst-Moldflow Engineer
POLYSMART TECHNOLOGIES PVT. LTD
February 2011 - February 2011
Analysis,& Validation on Moldflow Software.
Trainee-Production Executive Engineer
Hi-Grade Ind. Pvt Ltd.
July 2010 - December 2010
Production of Masterbatches with different plastic materials,
& different additives.
Light/UV Stabilizer 10% to 20%
PP thick section, Used for Films, Monofilaments, Tapes, Profiles exposed to sunlight. Molding applications etc.
Blown film and Cast film applications, Injection Molding applications, Wire Extrusion and battery manufactures
Blown film and Cast film applications, Injection Molding Application.
Preparing white masterbatches of 40 to 60% composition in Polyolefins like PP & PE for Injection & Blow Molding, Film application purpose.
Trainee in Quality Department
Plastomech Ind. Pvt Ltd.
January 2010 - February 2010
Advance Product Quality Planning (APQP)
During APQP Stage Review of Customer Drawing, Customer requirements regarding Raw material, appearance, fitment testing’s & Potential failures during product launch are identified by CFT (Cross functional Team) .
APQP Stage is the guide for the product from development to PPAP (Production Part Approval Process) with a strigent timeline .
Phase 1: Plan & Define Program
Phase 2: Product Design & Development Verification
Phase 3: Process Design & Development Verification
Phase 4: Product & Process Validation
Phase 5: Feedback Assessment & Corrective Action
Quality Control for Regular Supply
After PPAP signup from customer, the project is handed over to regular Quality Team.
Quality department continuously focuses on controlling key parameters like :-
- Inhouse PPM
- Customer End PPM
- No. of Kaizens
- COPQ (Cost of Poor Quality), etc.
1. Troubleshooting on injection molding parts,by changing process parameters.
2. Understanding quality Documentation.
Qualifications & Certifications
Maharashtra Institute of Technology
MIT, Kothrud, Pune