Hutagaol - MS. Windows, Word, Exel, Power Point, Visio, Autocad 3D - Batam, Riau Islands, Indonesia

Marthin Henry Hutagaol

Batam, Riau Islands, Indonesia

Summary

Graduate from Electrical Engineering Degree School for Engineering of PLN’s Foundation (STT PLN – Jakarta, Indonesia). Experienced in field of electrical & instrument equipment for inspection, installation, supervision, calibration and commissioning in fabrication. I am well known as a team player and have never left a project under bad conditions I have understanding on various Oil and Gas platform such as: Installation Subsea Cable (Cable Lay), Gas Compressor Platform, Over Land Conveyor, Ship Drilling, Well Head Platform, E-House Electric at FPSO (Floating Process & Storage Offloading), Platform Utility Module, Platform Living Quarter Module, Central Process Platform (CPP), Drilling Jack Up Rig and Service Jack Up Accommodation also Vessel Supply Boat. I have understanding Electrical & Instrument hook up, Electrical & Instrument support installation, Calibration and testing of electrical & instrument also understanding of review the related instrumentation drawing such as piping and Instrumentation Diagram (P & ID), Cause & Effect Diagram, Loop Drawing, Tubing Data & Pressure required, Operational Sequence or Removing Orifice, Data Sheet, Type Fitting and selection material as required, ITR’s approval, punch list clearance, SBUM (Standard Basic Unit Man hours),Industry Code & Standard.
As an Electrical & Instrument Inspector present have many challenges and it gives a good sense of achievement and job satisfaction to have been a part of team that gets the job done.

Services

MS. Windows, Word, Exel, Power Point, Visio, Autocad 3D

  • Full time
  • Part time
  • One time
  • Contract
  • Temp

Summary:

Advance

Work History

Electrical Instrument Commissioning Engineer

COOEC SES LTD

January 2014 - August 2014

Project: CNOOC - BANUWATI-K Gas Compressor Platform
Job Summary:
1. Preparation of Electrical & Instrument Pre-commissioning and Commissioning Activities
2. Preparation of Electrical & Instrument Operation Test Procedure (OTP) as per Sub-System and Job Risk Assessment also Lockout Tagout / LOTO Procedure.
3. To ensure that all construction equipment and all temporary facilities required for Electrical & Instrument pre-commissioning and commissioning are provided in good time by the contractor.
4. To ensure that pre-commissioning and commissioning activities are performed by the contractor according to approved procedures and contract requirements, including, as applicable:
5. Provision of necessary pre-commissioning and commissioning spare parts, equipment, tools, instruments and fluids
6. Acquisition and maintenance of all pre-commissioning and commissioning documentation and records.
7. Pre-commissioning checklists, test sheets, database, punch lists, dossiers
8. Commissioning preliminary checks, functional tests, operational tests, database, punch lists, hand-over dossier
9. Performance of repair work for defective systems and re-testing as required.
10. To participate in the contractor's work planning meetings as required.
11. Pre-commissioning and commissioning activities performed by the contractor.
12. To ensure that the pre-start-up activities are performed by the contractor according to approved procedures and contract requirements, including supply of operating cons

Electrical Instrument Inspector

Global Petroproject Service (Saipem Reps)

From September 2014

1. Coordinate and organizing the daily inspection activities on equipment receiving and installation of electrical and instrument items
2. Prepared & check for all electrical & instrument drawing, standard drawing, material specification and brochure.
3. Ensure that, quality installation of all electrical / instrument equipment and accessories are complying with the latest project drawings, specifications, manufacturer instruction, safety rule, and good practice
4. Check procedure of equipment test obtain the relevant document and manage documents certifying test.
5. Site surveillance to check the construction work and give comments if necessary, according to standard (hook up, P & ID drawing, etc).
6. Visual inspection of Cable Laying (Subsea Cable) during installation, as per drawing lay out, hook-up drawing, and General Arrangement drawing.
7. Monitoring Control Cable Tansioner during Cable Lay (Subsea Cable) installation.
8. Witness Cable test (Continuity test and monitoring by OTDR) for cable Telecom / Fiber Optic, Electrical and grounding test
9. Instrument Tubing Leak Test
10. Inspection for all Instrument device in calibration, Material specification, Data sheet & Vendor Calibration Data
11. Prepared to check for ITR Sheet, MC Sheet and Completely all relevant document for Electrical / Instrument
12. Record of all relevant inspection activities and outstanding works.
13. Construction correspondence, Request for Inspection, Document Transmittal.

Electrical Instrument Commissioning Engineer

SMOE Indonesia

March 2013 - December 2013

Project: Premier Oil - Wellheads Platform Naga Pelikan
Job Summary:
1. Preparation of Electrical & Instrument Pre-commissioning and Commissioning Activities
2. Preparation of Electrical & Instrument Operation Test Procedure (OTP) as per Sub-System and Job Risk Assessment also Lockout Tagout / LOTO Procedure.
3. To ensure that all construction equipment and all temporary facilities required for Electrical & Instrument pre-commissioning and commissioning are provided in good time by the contractor.
4. To witness Factory Accepted Test (FAT), Final Inspection Equipments and closing punch list activities with Client (Premier Oil) by Vendor such as:
• LV Switchboard - Bartech Singapore.
• MV Switchboard - B&F UK.
• Navigation Aids & Fog Horn - Tide Line Singapore.
• Radio & Telecom - Vector Info Tech Singapore.
• Helideck Lighting & Windsock - Suplintama Majusemesta Indonesia.
• Transformer - Schneider Jakarta.
• Normal Distribution Board (NDB) - Cooper Crouse-Hinds, Germany.
• MV Switchboard Modification - Schneider Jakarta.
• Monitoring Control System (MCS Package) - Yokogawa Singapore.
• SIS Package - Yokogawa Sigapore.
• Wellhead Control Panel System - Proserv Batam.
• UPS Battery System - Bartech Singapore
5. To ensure that pre-commissioning and commissioning activities are performed by the contractor according to approved procedures and contract requirements, including, as applicable:
6. Provision of necessary pre-commissioning and commissioning spare parts, equipment, tools, instruments and fluids
7. Acquisition and maintenance of all pre-commissioning and commissioning documentation and records.
8. Pre-commissioning checklists, test sheets, database, punch lists, dossiers
9. Commissioning preliminary checks, functional tests, operational tests, database, punch lists, hand-over dossier
10. Performance of repair work for defective systems and re-testing as required.
11. To participate in the contractor's work planning meetings as required.
12. Pre-commissioning...

Electrical Instrument Coordinator

Indokomas Buana Perkasa

May 2012 - March 2013

Project: Melawan Crushing Plant & Western OLC - East Kalimantan
Job Summary:
Overall responsibility for coordination of E&I works. Will take direction from and report to Construction Manager for the entire E&I works status of the project work, also provide technical expertise and guidance to Engineers on the project team, and it responsible for completion of engineering tasks necessary to meet the project requirements.
1. Perform detailed check of the specified scope and engineering requirements of the project.
2. Practice Project Execution Plan including preparing and monitoring project schedule.
3. Oversees engineering of various disciplines as required as scope of a major project.
4. Review client specification.
5. Reconciles with requirements as spelled as spelled out in purchase order documentation.
6. Assigns tasks to engineer disciplines on project team.
7. Assumes specific tasks on project that are within major field of expertise.
8. Coordinate construction activities with E&I contractor to insure meets schedule.
9. Provide construction manager a single point of contract for construction activities.
10. Monitors communications between project team engineers and client, vendors, and outside engineering contractor. Provides advice and guidance where necessary.
11. Responsible for insuring completion of all aspects of construction associated with the projects, coordinated and lead E&I contractor, E&I material inspection and test certificates reviewing, ITR related supports/preparation to E&I contractor and with client.
12. Actively promote and observe all company policies, employee handbook, safety and security procedures.
13. Comply with work schedule.
14. Comply with company time keeping policy.

Electrical & Instrument Inspector

NIPON STEEL Batam - Offshore Service (Indonesia)

March 2011 - April 2012

Department: QHSE
Project: TOTAL - South Mahakam Development Phase 1&2
Job Summary:
1. Coordinate and organizing the daily inspection activities on equipment receiving
And installation of electrical and instrument items
2. Liaison with client inspector
3. Prepared & check for all electrical & instrument drawing, standard drawing, material specification and brochure.
4. Inspection to fabrication shop, ensure that size and type of supports fabrication according with approval shop drawing include inspection at installation at field.
5. Ensure that, quality installation of all electrical / instrument equipment and accessories are complying with the latest project drawings, specifications, manufacturer instruction, safety rule, and good practice
6. Check procedure of equipment test obtain the relevant document and manage documents certifying test
7. Inspections for cable trays / ladders include accessories, level and tighten.
8. Site surveillance to check the construction work and give comments if necessary, according to standard ( hook up, P & ID drawing, etc )
9. Inspection for cable routing, of Electrical, Instrument, Telecommunication , CCVT, Fire & Gas
10. Inspection termination all cable Instrument & Electrical at equipment and Junction Box Instrument, JB lighting, local control station, Marshaling Cabinet, lighting distribution board, LV Switchboard according with approved termination drawing and single line diagram
11. Inspection tubing routing from Wellhead Control Panel , SSV / Wing Valve, SDV / Master Valve, SCSSV / Down Hole Safety Valve to bulk head of Christmas tree
12. Visual inspection of fittings and installation all equipment of Electrical, Instrument and tubing as per drawing lay out, hook-up drawing, P & I D and General Arrangement drawing
13. Cable test (Continuity test, merger test ) for cable Instrument , Electrical and grounding test
14. Instrument Tubing Leak Test
15. Inspection for all Instrument device in calibration, Material...

Electrical & Instrument Supervisor

McDermott Indonesia

April 2010 - March 2011

Department: Pre-commissioning / Commissioning
Project: Chevron Platong Gas II - Thailand (Utility, LQ & CPP Deck)
Job Summary:
Verification confirms that construction and installation of electrical & instrument equipment and cable are physically complete and all inspections, testing and documentation requirement have been completed, this includes equipment and component installation and calibration checks, cable installation and testing.
Electrical Scope:
1. Carry out inspection working progress (loop test, continuity check and insulating resistance test) ensure compliance with project specification.
2. Perform field inspection with document standard in accordance drawing layout, P & ID, general arrangement & schematic of cable connection.
3. Perform inspection equipments and utilities such as distribution panel, junction box, battery charger, UPS system, marshaling cabinet, local control panel or unit control panel, duct heater, thermostat & fire dumper, motor operated valve (MOV), navigation aid, all lighting type, emergency diesel generator, gas turbine generator (Taurus-solar turbines), gas turbine compressor, medium voltage switchgear, motor control centre (MCC).
4. Check and completed job as per specification project of construction process like as gland install, cable tagging / cable marker, routing and dressing cable in line cable tray from source to site, also wiring termination (suitable in spec and hazardous location).
5. Perform for rise up and signed punch list when inspection found not in specification project required.
6. Notification, witness and joint inspection with E & I client inspector.
7. Prepare permit to work (PTW) and lockout take out (LOTO) before commissioning functionally test.
8. Verifies, reviews functional / system test (continuity and insulation test) during commissioning & installation phases include fit up after M.C ITR (Mechanical Compliance / Inspection Test Report) and troubleshoot.
9. Maintenance record and rectifier...

Senior E&I Quality Control (QC)

Drydocks World Graha Offshore

May 2009 - April 2010

Department: Electrical & Instrument Production
Project: 1. Master Marine. L-205 (Service Jack up Rig Accommodation)
2. UMSW Drilling. L-203 (Jack up Rig)
Job Summary:
1. Installation & commissioning overview.
2. Review of electrical drawings, fault finding and corrective action practices as per specification.
3. Electrical site support and inspection.
4. Perform technical evaluation on vendor's documents.
5. Provide guidance on offshore quality standards for the hull structure during new construction and repair where quality standard not met.
6. Ensure the welding of hull structures to be carried out by qualified welders, according to approved and qualified welding procedures and with welding consumables approved by the classification society.
7. Ensure the work to be carried out in accordance with classification society rules.
8. To confirm all materials used should be manufactured at a works approved by the classification society for the type and grade supplied.
9. Carry out visual inspection for the appearance of weld to confirm the acceptability.
10. Review and confirm drawing and standard requirement.
11. Asses defect as to either repairing or to be accepted.
12. Update progress of production and report to head office.
13. Be continually vigilant with respect to HSE impacts, unsafe acts and conditions.
14. Ensure quality of built up sections and block assembly before joined on slipway.
15. Measure paint thickness and compare with the values in painting scheme.
16. Measure material thickness and compare with values on construction drawings.
17. Ensure the measurement of main dimension; including length, breadth and dept of the body.
18. Trouble shooting with the offshore Technical Dept. in sorting out the problem.
19. Coordination with the Production & QC for the improvement of the fabrications.

QA/QC Electrical Inspector

Drydocks World Pertama Shipyard

May 2008 - May 2009

Department: QA/QC
Project: 1. COASTLINE MARINE - OSA GOLHIAT (Hull - 158, Supply Boat)
2. HALLIN MARINE - HALLIN (Hull - 154, Supply Boat)
Job Summary:
1. Inspect high & low voltage terminations, splicing, cable pulling operations and substations.
2. Inspect above and below ground electrical installations.
3. Inspect transformer and switch gear.
4. Inspect HVAC, Cable Ladder/Tray
5. Knowledge in MCT (Multi Core Cable Transmission).
6. Write inspection reports, non-compliance reports; prepare and maintain inspection reports.
7. Review inspection waiver requests.
8. Familiarized with subcontractor Quality Plans, ITP's and procedures.
9. Familiarized with Package specifications and drawings.
10. Establish and maintain a good working relationship with the Subcontractors' management and QA representatives.
11. Be continually vigilant with respect to HSE impacts, unsafe acts and conditions.
12. Inspection of electrical installation switchgear and MCC's, transformers, UPS systems & motors and Lighting.
13. Electrical site support and inspection
14. Updating work progress to coordinator
15. Review of electrical drawings, fault finding and corrective action practices
16. Prepare as built drawing (AutoCAD) and documentation (Ms. Word and Excel)

Assistant Electrical Technician

Indonesia Power - UNIT OF POWER PLANT BUSINESS

June 2006 - June 2007

June 2006 - June 2007
MRICA, BANJAR NEGARA - CENTRAL OF JAVA INDONESIA
Designation: Assistant Electrical Technician
Job Summary:
1. Ability for electrical power distribution and interconnection 150 Kv
2. Responsibility for activities maintenance (daily, weekly, monthly) of spillway
3. Responsibility for activities maintenance (daily, weekly, monthly) of power transformers & distribution transformers
4. Responsibility for activities maintenance (daily, weekly, monthly) of governor meter at power house
5. Participates actively during doing overhaul generators
6. Participates actively Implements safety procedures and company regulation in the execution, to perform good housekeeping and maintain work area clean during as well as after the completion to promote safe and clean / better working condition.

Projects

Hasbah & Arabiyah - Saudi Aramco

Offshore Facilities, Sub-sea Power Cable installation and Sub-sea Power Cable Trenching. (Gulf of Persia)

Qualifications & Certifications

Electrical Instrument Equipments in Hazardous Area (ATEX - EEHA)

City and Guilds of London Institute by OPITO

STT PLN - Jakarta

ENGINEERING

SCHOOL for ENGINEERING of PLN'S FOUNDATION

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×