Abdallah - Instruments &Control Senior Engineer In Oil & Gas - Cairo, Cairo Governorate, Egypt

Mahmoud Abdallah

Cairo, Cairo Governorate, Egypt

Services

Instruments &Control Senior Engineer In Oil & Gas

  • Full time
  • Part time
  • One time
  • Contract
  • Temp

Summary:

13 years experience in instruments & control Systems engineer in oil &gas and Petrochemicals field.

 Supervise for Carrying out Preventive & Corrective maintenance according to manufacturer recommendations.
 Maintenance Steam Turbine Siemens ST600, Governor Valves, Woodward 505E & Protech 203.
 Maintenance Steam Turbine Chin Bon Load Hitachi Compressors and Flowserve Dry gas seal system.
 Maintenance two Hitachi Compressors and anti-surge Valves and John crane Dry gas seal
 Anti-Surge system and Automatic tank gauging system
 Maintenance Vibration Bentley Nevada System 3500 Proximitors.
 Maintenance fire system, Gas Monitoring System,
 Maintenance GE Expander with Load Generator Siemens
 Maintenance DCS, ESD Siemens PCS7 and Semitic S7 400
 Tie-In Line with Khrone Gas Metering Skid with Prover Commissioning & Start up until operation Maintenance Activities.
 Provide specialized technical support, troubleshooting and failure analysis of all instrumentation, plant Analyzers, Fire & Gas and associated control systems.
 Review Preventive Maintenance strategy, PM plans, and spare parts availability to improve the plant reliability.
 Review and participate in the design and development of deviation projects in all areas.
 Regular contacts with team members in cross-functional team for planning and effective handling of maintenance jobs.
 Prepare procedures for critical equipment maintenance jobs.
 Provide field support for work execution of critical equipments. This may include reviewing contractors' regular reports, assessing their performance and providing advice as necessary. Take part in the coordination meetings with Operations for the follow up of critical equipments.
 Familiar with CMMS system Maximo.

Work History

Senior Instruments &Control Engineer

Egyptian Propylene &Polypropylene Production Co

From October 2009

EPPC.
From: October. 2009 until present. UHDE and Basell Technologies
Senior Instruments &Control Engineer. PDH/PP
* Job achievements: Catching all activities from construction phase, pre-commissioning, commissioning to Startup phases and now normal operational Maintenance for instruments & Control and DCS,
* Supervising the technical team from construction phase, installation, calibration, pre commissioning &commissioning and startup for all plants Equipments and Skids.
* Supervise installing DCS, ESD Siemens PCS7
* Lead the technical aspect of the DCS ESD, Siemens PCS7 systems implementations.
* Pre-Commission &Commission &operational Maintenance for Systems components according to QA/QC standers for:
(Utility System)Ammonia Refrigeration System , Instrument Air System, Fire Water System , Water treatment system , Demin Water system , Steam boiler 150 Ton, Reactors(Preheater, Reformer, Oxi-reactor) for Propane Dehydrogenation , Cooling Towers, Cold Box System, Fractionation Unit and Polymerization unit , Extrusion Unit and Packing Units
* Supervise for Carrying out Preventive & Corrective maintenance according to manufacturer recommendations.
* Maintenance Steam Turbine Siemens ST600, Governor Valves, Woodward 505E & Protech 203.
* Maintenance Steam Turbine Chin Bon Load Hitachi Compressors and Flowserve Dry gas seal system.
* Maintenance two Hitachi Compressors and anti-surge Valves and John crane Dry gas seal
* Anti-Surge system and Automatic tank gauging system
* Maintenance Vibration Bentley Nevada System 3500 Proximitors.
* Maintenance fire system, Gas Monitoring System,
* Maintenance GE Expander with Load Generator Siemens
* Maintenance DCS, ESD Siemens PCS7 and Semitic S7 400
* Tie-In Line with Khrone Gas Metering Skid with Prover Commissioning & Start up until operation Maintenance Activities.
* Provide specialized technical support, troubleshooting and failure analysis of all instrumentation, plant Analyzers,...

Commissioning Control Engineer

Kureimat Power Plant

March 2009 - July 2009

750 MWatt
Two Turbines Combined Cycle GE Frame 9FA DLN 2
During: March 09 to July 09
Commissioning Control Engineer
* -Installation Mark VI Turbine Control Panel TCP, HMI Complicity program, Remote Network, OSM (on site monitoring)
* -Installation interconnection from TCP to valves & instruments.
* -Cold Loop Cheek for all Turbine Valves & instrumentation.
* -Hot Loop Cheek &function test for all valves & instruments by Mark VI
* -Pre-Commission &Commission for All turbine systems like Hydraulic oil, Lube oil, sealing oil, Gas Fuel Valves Atomizing air, Liquid fuel, fire system, Gas Monitoring System, Bentley Nevada 3500 Proximitors
* Gas Fuel Valves Atomizing air, Liquid fuel, fire system, Gas Monitoring System, Bentley Nevada 3500 Proximitors
* Turning gear start up, Hydrogen Generator cooling system
* Firing turbines. Start up
* Control Room Operator in Central Control Room for two GE 9FA Gas turbine and GENP systems until finish reliability time.
* Modify and down load new Complicity Screens as customer request

Installation, Commissioning& fire Commissioning Control Engineer ring two GE Gas

Major Inspection &Maintenance for Five Gas

From October 2008

turbines GE Frame 5E
* GENP Compressor Dry gas seal Exchange and Check for Six Compressors
* GE Nuovo Pignone overall maintenance for Gas Compressors. Valves calibrations, check all control elements and Seal oil System
* Reinstalling and adjusting all the vibration probes, Bentley Nevada 3500
* Calibration for all instruments & valves on the GE Frame 5E gas turbine
* Maintenance GE Mark-VI Control system for Gas Turbines, GE Networks, HMI Screens and Servers and DCS
* Update HMI Screens according to Customer request.
* GENP Compressor Dry gas seal Exchange
* GE Nuovo Pignone overall maintenance for Gas Compressors. Valves calibrations and check all control elements, Anti surge control, Sealing System troubleshooting
Nubaria Power Plant (Egyptian Electricity Production Co.) 750 MWatt
Installation, Commissioning& fire Commissioning Control Engineer ring two GE Gas
Commissioning Control Engineer

* Installation Mark VI Turbine Control Panel TCP, HMI Complicity program, Remote Network, OSM (on site monitoring)
* Installation interconnection from TCP to valves & instruments.
* Cold Loop Cheek for all Turbine Valves & instrumentation.
* Hot Loop Cheek &function test for all valves & instruments by Mark VI
* Pre-Commission &Commission for All turbine systems like Hydraulic oil, Lube oil, sealing oil, Gas Fuel Valves Atomizing air, Liquid fuel, fire system, Gas Monitoring System, Bentley Nevada 3500 Proximitors
* Gas Fuel Valves Atomizing air, Liquid fuel, fire system, Gas Monitoring System, Bentley Nevada 3500 Proximitors
* Turning gear start up, Hydrogen Generator cooling system
* Firing turbines. Start up

Technical Advisor Control Engineer

Oil& Gas &Energy

June 2007 - October 2009

In following Sites
ELNG (Egyptian Liquefied Natural GAS)

Work as Commissioning Engineer

Alexandria Lube oil, Hydraulic, Sealing Systems

for gas turbines systems as Lube oil, Hydraulic, Sealing Systems commissioning
Ameria Petroleum Refinery Co
Instrumentation & Control
August (2001-2005)
Alexandria, Egypt
Job description:
* Responsible for sizing and specifying control valves.
* Lead the technical aspect of the DCS & PLC systems implementations.
* Provide technical services to maintenance and operations divisions with regards to instrumentations related to the process control and associated auxiliary control systems; assess plant facilities & process arrangements.
* Maintenance of Instruments (temp., Pressures, flow, Level Transmitter) ABB, , Siemens, Honeywell , Rosemount and Fisher Technology , HART Communicator 375
* Technical advice on the design, engineering, troubleshooting, and modification of a wide range of field instrumentation including: sensors, transmitters, control valves (Fisher), field analyzers, gas chromatograph (Siemens, ABB, Variant)
* PLC (Siemens S7 300-Omron CQ1H -Koyo DL230 -Mitsubishi FX Series)
* DCS (Yokogawa CS3000)
* -System Desalination Plants (Siemens PLC S7-300)
* Maintenance & trouble shooting for Utility Systems as chillers and Air compressors (Ingoroser Rand-Atlas Copoco)
* Rotating machinery (compressors) GENP instrumentation and anti surge control

Projects

Egyptian propylene &polypropylene co.

Senior instruments Control Engineer
catch all activities from construction phase , pre-commission's , commission's until start up phase , now carrying out normal preventive & corrective maintenance,

Qualifications & Certifications

Communication Engineer

Alexandria University

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?

   
Supported Countries
Choose your country

×