Pandya - TIG Welder - Mumbai, MH, India

Mahendra Pandya

Mumbai, MH, India

Services

TIG Welder

Work History

Abu Dhabi as Welding & Mechanical Sr.Superintendent

India & Overseas

August 2011 - May 2013

JOB RESOPNSIBILITES
Supervises and Coordinates activities of workers engaged in welding and fabrication of products, fitting of product, DSS, SDSS, SS, CS and other work related duties as assigned. Managing documents, reviewing and submittal for approval to the client related with WPS, PQR, welder qualification, welder approval, arranging PQT (welder qualification test) in presence of TPI for witness. Monitor and Control the Condition and storage of filler metals and adequacy of equipment to be used. Inspect weld joint edge geometries, joint fit-up, preheating. Supervise welding procedures tests and monitor welding in production.

Welding superintendent

Supreme Offshore

September 2010 - July 2011

JOB RESPONSIBILITES
Handling of overall responsibilities of fabrication, production PQR, WPS in copper nickel & DSS
And coordinating with NDT(QA/QC) etc.

PDO QARNALAM STEAM PROJECT in OMAN as Welding Superintendent

Dodsal Engineering and Construction LLC

June 2009 - August 2010

JOB RESPONSIBILITIES
Supervises and Coordinates activities of workers engaged in welding and fabrication of products, fitting of product, DSS, SDSS, SS, CS and other work related duties as assigned. Conduct Certification Weld Training programs for the welders according to requirement used Standard. Plan and control of welding materials including review of purchasing specification and perform receiving inspection of filler materials and welding machines. Monitor and Control the Condition and storage of filler metals and adequacy of equipment to be used. Inspect weld joint edge geometries, joint fit-up, preheating. Supervise welding procedures tests and monitor welding in production.

welding superintendent, NDT coordinator, gas tester & permit holder

OXY - DODSAL CENTRAL PROCESS FACILITIES AND SATELITES

June 2008 - June 2009

1 & 2 PROJECT (SULTANATE OF OMAN) as a welding superintendent, NDT coordinator, gas tester & permit holder as (performing Authority).

Oman as welding supervisor for pressure vessel, tanks, piping

JOB RESPONSIBILITES

March 2006 - December 2007

RT follow up

JOB RESPONSIBILITY
Co-ordination with the client representative for ongoing jog activities including welding and fabrication of pressure vessel, tanks, piping and structural welding for various materials involve viz, DSS, super DSS, ferrous and non ferrous alloys. Managing documents, reviewing and submittal for approval to the client related with WPS, PQR, welder qualification, welder approval, arranging PQT (welder qualification test) in presence of TPI for witness. Liasioning with main contractor Petrofac International and client PDO for construction of "Kauther Gas Plant Project". Activities included managing reports for welding drawings, welding procedures, PQR's. Zero defect achieved for handling of welding and fabrication of 7500 inch. Diameter spools of heavy wall thickness.

SINCE MARCH 2003 TO DECEMBER 2005
Working with AL JABER GRINAKER LTA as welding, supervisor for the Takreer unleaded gasoline/low sulphar gas oil areas & welding works in green areas and existing refinery areas.

JOB RESPONSIBILITY
Directing and controlling 45 manpower, submission of welding and forecast report on date to date basis or pipe welding. Conduct Certification Weld Training programs for the welders according to requirement used Standard. Ensuring that each new employee, whether temporary or permanent, receives appropriate safety training at the start of employment. Supervises and coordinates activities of workers engaged in welding and fabrication of products, fitting of product, and other work related duties as assigned. analyze work orders and blueprints to determine need for supplies and sequence of operations required.

FCW Dubai McDowell co

September 2003 - March 2004

Worked with Father Agnel's Instructor. FCW Dubai McDowell co.

JOB RESPONSIBILITY
Handling of overall teaching and updating responsibilities. Verifying different tools M/C by inspecting them. Inspect weld joint edge geometries, joint fit-up, preheating. Supervise welding procedures tests and monitor welding in production. Inspect welds before, during and after welding. Prepare cost estimates for materials, Requisitions supplies, such as weld rods, gas, flux, and fixtures. Supervise fitting of product, and other work related duties as assigned.

Kutch and Gujarat

November 2002 - May 2003

India. On125 KV megawatt project as welding foreman

JOB RESPONSIBILITY
Plan daily activities in support of the project schedule objectives, supervise the work force; provide guidance to accomplish the set forth daily objectives, resolve daily issues with production, personnel, maintenance of equipment and inspect, repair and weld any defective parts as needed.

Jebel Ali

December 2001 - September 2002

as welding foreman. Jebel Ali power plant & Desalination plant Station "k" Phase Dubai

Job responsibility: Supervising activities of Aluminum bus bar Welding (MIG) Installation works of 17.50KV isolated bus duct of 250MW Generators

JOB RESPONSIBILITY
Plan and Conduct Certification Weld Training programs for the welders according to requirement used Standard. Supervises and coordinates activities of workers engaged in welding and fabrication of products, fitting of product. analyze work orders and blueprints to determine need for supplies and sequence of operations required. Prepare cost estimates for materials, Requisitions supplies, such as welding Machines and rods, gas, flux, and fixtures. and other work related duties as assigned.

Welding Foreman

Dolphin offshore Enterprises (India) Ltd

April 2001 - June 2001

JOB RESPONSIBILITY
Welding in GTAW-Cu-NI (Alloy C-070600) &6G Argon. Supervising repairs and modifications to commercial and Military vessels. Inspection of completed welding and fabrication. Report writing. Responsible for Health & Safety

Welder /Quality Control Electrode Specialist & Q.C Inspector

Dammam-KSA

December 2000 - March 2001

as an Electrode Test
Welder /Quality Control Electrode Specialist & Q.C Inspector

JOB RESPONSIBILITY
Monitoring the welders training. Organize Welder Qualification Tests. Welders/fitters and foremen activity coordinating. Monitoring and reporting overall project welding performance. Dimensional controls and welding inspection(visual). Monitoring the welder's performance. Supervising the welding operation , checking the suitability of protections and precautionary measures adopted by the welder both for preservation of electrodes and for facing adverse atmospheric conditions

Welding Specialist & qc process inspector

JANUIARY

Up to January 2000

JOB RESPONSIBILITY
Pipeline down welding specialist Demonstrator Of MIG , TIG & Plasma , (6) Years as well versed in submerged ARC Welding , QC Process Inspector Supervise production-welding activities. Identify the cause of defects on the basis of NDT results and eliminate said causes. Improve and apply standard procedures and ensure operations are efficiently executed in support of the production schedule. dimensional control and welding inspection (visual), subcontractors activities control. supervising the welding operation checking the suitability of protections and precautionary measures adopted by the welder both for preservations of electrodes and for facing adverse atmospheric conditions. checking the extent of the repairs of the various welders taking any corrective actions, if necessary. Quality control for petrochemical equipment, (pressure vessels, pipe lines and pipe spools, heat exchange and metal structures)

MAZGOAN DOCKS Ltd

October 1985 - December 1986

Worked with MAZGOAN DOCKS Ltd as TIG Welding Cupro nickel alloy Titanium submarine section

JOB RESPONSIBILITY
Marine Hardware, Subsea Pipelines & Equipment, Heat treating alloy Systems, Ship repair, Ship Building All Major Welding & Brazing Processes, Metallurgical Processing and Coating, HFI Pipe Qualification for Sour Gas Service.

S.N.C.M.P-Abu Dhabi

October 1983 - April 1985

worked with on bomb proof tanks & pipe lines .Nickel jobs LPG, LNG -Plant in Das Island

Spare Tank

December 1982 - May 1983

American Society of Non -Detractive
ASNT Level IIUT /RT/PT/MT/VT

Projects

SOHAR PROJECT-OMAN

Welding Supervisor

MUKASANA PROJECT-OMAN

Welding Superintendent

QUARNALAM PROJECT-OMAN

worked as superintendent-welding

IGD HABSHAN-5 PROCESS PLANT- ABU DHABI

worked as welding superintendent

Qualifications & Certifications

DME-MECHANICAL

ST. PETER'S UNIVERSITY, CHENNAI

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?

   
Supported Countries
Choose your country

×