Sukumar - HVAC Engineer - Chennai, TN, India

Madhavan Sukumar

Chennai, TN, India


HVAC Engineer

  • Full time
  • Part time
  • One time
  • Contract
  • Temp



Work History

Lead Project Senior Engineer in HVAC , MEP and Maintenance

MEP and Maintenance

From February 2012

Project: EPC Contract Project Gasco Al Ruwis 4 th NGL Train project, Habshan-5 Industrial facility project and Additional office building at ASAB Gasco project in Abudhabi
Volume of project 4 th NGL HVAC - 120 million dollars , Plumbing drainage and firefighting 150million US dollars Electrical 130 million dollars.EPC contract gas piping total volume 5 billion project.
Additional office total volume 190 million AED HVAC 60 million, plumbing, drainage&fire fighting AED 40 million AED, Electrical 90 million AED
Professional strength:
• Comprehensive knowledge of mechanical engineering concepts, mechanical drawings, and construction guidelines
• In-depth knowledge of HVAC design principles, electrical safety systems, and engineering specifications
• Extensive knowledge of power engineering systems, HVAC codes, and HVAC /MEP containment facilities
• Well versed in installing and commissioning building equipment by following safety guidelines
• In-depth knowledge of HVAC controls with sound knowledge of various operating platforms
• Good team work communication and project management skills
Job Responsible:
• Handle responsibilities of developing the design concepts of HVAC systems and perform analysis of the same
• Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and specification
• Handle the task of planning highly complex engineering specifications to meet project requirements
• Responsible for calculating project cost as well as conduct performance assessments of HVAC systems
• Handle responsibilities of verifying the working of the control system as per standards
• Responsible for delivering quality services by designing high-end hydraulic and air distribution systems
• Performed responsibilities of providing engineering input in estimating equipment and material cost for successful project execution
• Performed the task of developing initial design documents that contains layout and construction...

Project Manager in HVAC and MEP


June 2010 - December 2012

ETA EMCO Division AbuDhabi U.A.E
Duration: JUNE 2010 To Dec 2012
Designation: Project Manager in HVAC and MEP
Project: ASAB
Cost of project: 260 Million AED.
HVAC-80 million AED Electrical-120 million plumbing, drainage , fire fighting compressed gas pipe 60 million
ETA EMMCO Abudhabi is a reputed MEP construction organization coming up with stores, Distribution centers & Accommodation, power plant, industrials, commercial buildings landscape water features. At various locations in UAE with the vision to provide unprecedented affordability, quality& choice in global products & services to the customers.

Job Profile:
Project Management , Budgetary and Forecasting, liaisons works , Resource Management, Man power control , Design, Quality , Execution and follow up as per safety procedure for construction works implementation and completion of projects on time or stipulated time etc.

• Responsible for the Design of A/C System, A/C duct system, plumbing, fire fighting and sewerage system.
• Responsible for the Installation of the A/C units, such as window type, split type, FCU, Package Unit (PU) and Air Handling Unit (AHU or FAHU).
• Responsible for the fabrication and installation of A/C ducting.

• Design, and Execution of HVAC system, selection of chiller, cooling towers, ventilation Fans, AHUS, FAHUS Pumps and Plated Heat exchangers capacity of chiller and cooling tower from 2,500 to 5,000 TR and AHUS 50,000 CFM.
• Responsible for the Fire fighting FM 200 , Inergen gas system, FACP panel for fire alarm , smoke detectors by Photo electric, Thermal ionization and manual method.
• Responsible for BMS points for mechanical and ELV system and DLP for room Automation like human sensing devices fully controlled by electronic switch devices.
• Responsible and execution of BMS points for ON/OFF and Modulating communicate system for FCUS, AHUS and FAHUS.
• Responsible for the Plant room installation potable water pumping station, TSE pumping station and foul water...

HVAC Project Senior Engineer

M/s Voltas limited

March 2008 - May 2010

Cost of project: 1.2 billion AED Retail shopping mall , Formula -1, Ferrari Yas island
HVAC- 400 million , Electrical 600 million plumbing drainage and fire fighting 200 million

Barwa city in Qatar total MEP volume 600 million
HVAC 210 million QR Plumbing drainage &fire fighting 150 million QR Electrical 240 million QR
Company Profile:
Voltas International Operational Business Group is one of the leading MEP contractors in Middle East. Prestigious Projects in Qatar M/s Barwa Residential Government project and Shiek Hamad Hospital includes the world highest tower al burj Dubai, Dubai Marina, Emirates Mall, Dubai International Airport Extension project and Burji dubai down town.

I was working as Project- Engineer in HVAC in one of the largest Retail mall at Abu Dhabi in a total area of 4.28 Lacs

Job Responsibilities are as follows:
• Coordinate with consultants for submission and approval of Shop Drawings
• Preparation of material submittals & get approval of material from customer.
• Planning and execution of A/C & ventilation systems as per design & drawing layouts.
• Ensuring effective site management and discipline to ensure safe execution of the projects.
Erection, commissioning of equipments, providing utility services to the equipments.
• Developing As-Built drawings / Testing & Commissioning reports / Warranty letters.
• Preparation of Method statement, Inspection test Plan , Material submittal.
• Shop drawing preparation for the HVAC , and chilled water piping drawing
• Shop drawing preparation for plumbing , drainage and electrical
• Coordination with design section re-evaluation/resizing of ducting , plumbing, drainage and chilled water piping etc.
Al Futtaim - Carillion, Deputed by Blue sky Electro mechanical L.L.C Dubai

HVAC Engineer

March 2002 - January 2008

Cost of project: 450 million AED
HVAC 150 million, Plumbing drainage& fire fighting 100 million Electrical 200
Job Profile:
Job Responsibilities Includes:

• Estimation of Air conditioning requirement & prepare the Heat Load Sheets.
• Design & execution of duct /chilled water pies /Dx pipes with HVAC equipments.
• Preparing Bill of Quantities and Specifications for HVAC system.
• Installation & commissioning of HVAC Equipments i.e. Chillers, Air Handling Units, Fan Coil Units , Cooling towers & Piping systems.
• Coordinate with consultants for submission and approval of Materials/Shop Drawings and inspection of works at site
• Planning and execution of A/C & ventilation systems involving Duct able Split and Central units as per design & drawing layouts.
• Generation of progress reports for various sites & responsible for meeting the targets.
• Foreseeing performance bottlenecks and taking corrective measures to avoid the same.
Site preparations, mobilization of contractors for carrying out erection activities.
• Ensuring effective site management and discipline to ensure safe execution of the projects.
Erection, commissioning of equipments, providing utility services to the equipments.
• Developing As-Built drawings / Testing & Commissioning reports / Warranty letters.
• Involved in electrical installation of cable tray, bus bar, fire alarm, smoke detectors, CCTV telephone data cable (truncking) etc.
• Coordinating for quotation from various suppliers for HVAC and accessories, chilled water piping , plumbing and drainage with accessories etc.
• Design and drafting for HVAC and chilled water piping , plumbing and drainage.
• Installation of FAD, SED, TFAHU, KFAHU, and Ventilation fans, and extract fans etc.
• Welding procedure and plan (WPS)

HVAC Project Engineer

Qatar Petroleum in Dhokan

August 1997 - February 2002

Cost of project: 333 million
HVAC-90 million QR, Electrical 180 million , plumbing drainage and fire fighting 63 million QR
Company Profile:
The QP Hospital developer and Construction Company being developed at 50 Acre of land comprising hospital towers, Residential towers, Shopping Mall, Multiplex, Hotel etc.
Job Profile:
Major responsibilities include:
• Execution of Central AC plant.
• Involved in MEP coordination at direct site.
• Shop drawing preparation for HVAC, chilled water piping, plumbing and drainage etc.
• Installation of cable tray,& trunking power , lighting and voice and data fire alarm control panel emergency lighting , cable laying and checking continuity testing and insulation resistance test etc
• Ensuring the coordination of HVAC Equipment layouts & drawings with Architects & other services design team.
• Closely monitoring the construction activities, material supply, budgeted cost, confirmation to the specifications & quality control
• Installation & commissioning of HVAC Equipments i.e Chillers, AHU, s , FAHUS FCU's , cw pumps Cooling towers & Piping systems.
• Erection of Ducting layouts for various buildings & basements as per National Building Code norms.
• Erection of piping network system for chilled water system & cooling water system.

• Operation & maintenance of Chillers, Air handling units, Fan coil units, Split air conditioners, Centrifugal pumps, Blowers, Cooling towers, DG sets, Water Softener plant & Swimming pool , and water canal etc. Planning Preventive maintenance of building installed mechanical & electrical machinery's / equipment & its compliance. Sanitary & plumbing installations in building as well as their regular maintenance. Maintaining the minimum inventory level, control of spares & asset management.

Bhajarang Refrigeration and Air-conditioning

HVAC Engineer (Carrier dealer)

September 1994 - June 1997

Cost of project: 40 million HVAC

Job Profile:
• Estimating & Costing of A/C System. Split, window and centralized air-conditioning.
• Involve to Design Check (HVAC) - Heat Load Calculation , Pump Head Calculation, ESP.
• Design and Drafting in CAD R-14.
• Calculation , Equipment Selection , Duct & Pipe Design
• Quantity Take off from Drawing, Drawing.
• Prepare Enquiry for Quotation & Query to Consultant.
• Price Comparison & Negotiate price with supplier / Sub -Contractor
• Prepare the Final price bill & settle with department Head.
• Prepare the B.O.Q., Prepare the Value Engineering
• Variation Claims & Submission for Projects.
• Visiting the clients, discussing for their requirements with a detail survey of the sites.
• Design of layouts for Split AC's for the clients.

Qualifications & Certifications


University of Madras

Skillpages has been acquired by! is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Are you sure that you want to leave?