Claim you profile
CNC Milling Machine Setter
- Full time
- Part time
- One time
CNC Lathe Machinist
From August 2013
(1 week) - Redditch
Setting/operating CNC Lathes that manufactured a variety of blots. I often inspected these components and the cutting tips that were in operation.
Van Driver & Drivers Mate
From August 2013
(2 weeks) - Birmingham
I worked for a builders merchants. I helped customers choose and deliver their purchases. I also drove a counterbalanced fork lift truck at the company's yard.
eResponce Recruitment Ltd
April 2013 - July 2013
I was working in a variety of locations for this agency but the majority of time was spent setting and operating drilling machines.
Si-Plan Electronics Research Ltd
May 2011 - January 2013
I set different types of equipment on CNC milling machines including vices, clamps and purpose made work holding fixtures. I replaced or set all the CNC cutting tools and assisted with the inputting/deleting of programmes on the Heidenhain or Fanuc CNC's. The quality was checked from me interporating an accompanying engineering drawing.
I often played a team role with the fitment/assembly of company products; these were purpose built testing rigs and machines. I regularly operated a counter-balanced fork lift truck and a portable gantry crane.
Gobal And Partner Ltd
September 2010 - December 2010
I physically tested or visually checking components for defects. Rejected parts would then be noted down for quarantine or re-worked.
October 2009 - May 2010
I picked customers' orders by driving a fork lift truck or did a variety of housekeeping tasks
Bromford Industries Ltd
July 2006 - September 2009
I preformed engineering operations on batches of small aerospace components using their appropriate types of conventional machinery. I always inspected these with measuring equipment such as shadowgraphs and a profilometer.
Tool Room Assistant
April 2002 - July 2006
I managed the periodic preventative maintenance for all plastic injection mould tooling. Also required of me was to build robotic devices to transfer components to the production line staff. I operated an overhead crane, and when necessary fork lift trucks.
Harper & Simmons Ltd
June 2000 - April 2002
I made sure that all preparatory machining operations were achieved ready for the teams of machinists. Afterwards I was required to assist with tool assembly and often prepared all the press tool trials. I operated a reach fork lift truck and sometimes a gantry crane.
Qualifications & Certifications
Alcester High School & Stratford-Upon-Avon College
Stratford Upon Avon College
Is this your profile?
If this is your profile, then you can claim it now and log into your account.
We will need to verify your account and email address before you can log in. To claim your profile now, please use the 'Claim Profile' button below.
Skillpages has been acquired by Bark.com!
Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.Find out more