Fernandez - Design & Engineering - Banjul, Gambia

Leonilo Fernandez

Banjul, Gambia

Services

Design & Engineering

Summary:

SPECIAL SKILLS:

• Designing of roads using the latest version of Auto cad Civil 3d 2010.
• Quantity Survey using Auto cad and spreadsheets.
• Prepare cross-sections & longitudinal Profile, for the submission to consultants incorporating the design
• corridors for Base, Sub-base, Sub-Grade and cut & Fill.
• Ability to Prepare Shop Drawings such as: Structural, Bar Bending Schedule from Footing , Columns up to beams.
• Architectural Door Schedules such as Hollow Metal, Wooden Door & Aluminum doors, Case works and
• Steel Works pertaining to architectural.
• ability to produce topographic map plan and generated computer data base for computing Civil Work Design such as Site Grading, Cross Section & Profiles, Computer
• Generated Volume Computation by super imposing the existing levels to the design levels, Slope & Elevation Analysis. Create an analyze terrain models, create contours.
• Well verse in operating both 2Dimensional & 3Dimensionals using the latest Auto cad Software.
• Knowledge in Project Management Primavera Software ver. III & Microsoft Project management Software.
• Ability to operate Word & Excel Spread sheets ,Power Point Corel Draw.
• Ability to install software. Can operate Total Station, level instrument for surveying.

COMPUTER SKILLS:
• Well Verse in using Auto CADD From ver.11-Ver. 2010 Civil 3D Software both 2D and 3Dimensional
• Well verse in windows XP, MS office 2003. i.e. Word, Excel.
• Well Verse in Auto cad Civil 3D version 2008,2009 and 2010 .Knowledge in Auto CADD LT and CADD Overlay.

Work History

Senior Design Engineer

Arezki Group S.A., The Gambia

From February 2013

Scope of Work :
• Senior Design Engineer In-Charge to all technical and constructions drawings prior to execution and shall be approved by the Engineer.
• Prepares Design plans such as Longitudinal Plan and Profiles, Cross-sections, Topographic map plans and volume computations using the Autocad Civil 3d 10.
• Prepares setting out coordinates, design pack listing criteria for the layout of the roads.
• Prepares road furnitures such as Road Markings, Highways Signs, and guard rails
• Prepares detailing of underground structures, such as,: Pipe and box culverts, side drainage for
T-Junction and Bus bays, road signs and road markings.
• Prepares bar bending schedules including setting out coordinates and design levels.
• In-Charge to do Request for Inspection (RFI’s), Request for Approval (RFA’s), New Activity Request (NAR’s) and Request for Queries (RFQ’s.
• In-Charge to do Quantity Surveying (QS), in preparation to be use for Interim Payment Certificate (IPC).
• Do quantity take off , Bill of Materials (BOQ) and general study report of the quantities for Cost reports.
• Coordinates with the Survey teams for all aspects of design, changes made on the alignments and other problems to make it sure that all coordination between design team and the people on the ground is well informed.
• Coordinates and lias with the consultants for a joint inspections, problem encounter and follow up for approvals.
• Do final as-built drawings to be submitted to the National Authority and the Client, Do field works and site inspections and other works related as maybe assigned from time to time.
• Report to Project Manager.

Senior Engineer

Ballast- Nedam Africa B.V.

August 2008 - August 2012

Scope of Work :
• Acting as a Deputy Engineering Department Manager.
• In-Charge for the preparation of Cross-Sections generated from the Auto cad Civil 3D 10 software for building roads.
• Prepares plan & longitudinal profile super imposing the design heights and the zero measurement ground levels.
• Prepares setting out coordinates or a design pack listing criteria for the layout of the roads.
• In-Charge for the detailing of under ground structures, such as,: Pipe and box culverts, side drainages, T-Junction and Bus bays, road signs and road markings.
• In-Charge for the detailing and bar bending schedules including setting out coordinates and design levels.
• In-Charge for the drawing of temporary work facilities such camp building, accommodation, stock yards, storage, building offices for the consultants and the contractor’s, storage and warehouse, workshops and prepares Material take off(MTO).
• In-Charge for the volume computation of the roads as per the design criteria set by the contract for cement stabilized based, sub-base, sub-grade and cut & fill using the latest Auto cad software.
• In-Charge and assist Senior Quantity Surveyors (QS)for the final quantities, variation order (VO) , Final Accounts and claims and providing all data’s for the Interim Payment Certificates(IPC).
• Checking the final BOQ against as-built drawings and conduct actual measurements as per as-built on site.
• In-Charge to check and re-check plans & drawing for the implementation and distribution at the site.
• Involved in the preparation of work method statement
• Do RFI’S, RFA’S, RFQ’s, NAR and SQR’s, prepares look ahead schedule to be submitted to consultants for approval.
• Coordinates and lias with the consultants for a joint inspections, problem encounter and follow up for approvals.
• Do as-built drawings, field works inspections.
• Report to Engineering Department Manager and QS Manager.

Site Engineer

REDICO LTD)Real Estate Development & Investment Company Ltd

April 2007 - July 2008

Scope of Work :
• In-Charge as a Site Technical Engineer for the Construction of Al Rajhi Bank in Al-Bashair.
• In-Charge for the Site Development of Civil works i.e. Parking & Drainage
• In-charge for the construction of the site Development i.e Boundary Wall, Layout of Parking, Curb Stone as per plan design elevation and design specification.
• In-Charge to oversee the work of the sub-contractor for finishing of the building, i.e Aluminum Alpolic wall Cladding false ceiling works(for Acoustical Tile, Gypsum Board and metal ceiling Grid), Floor tile works and all other aspects involving the whole operation for the turn over of the project.
• In-Charge to do the quantity take-off for the material requisition as per actual site needed.
• In-Charge for the layout and markings to be used by sub contractor in the field.
• In-Charge to check and re-check plans & drawing for the implementation at the site.
• Follow up materials on time to avoid delays

Technical Engineer

Fast Contracting Company P.O. BOX 5180 Jeddah 21422 K.S.A.

March 2004 - March 2006

Scope of Work :
• In-Charge as a Technical Engineer for the preparation of Shop drawings such as Bar Bending schedules, Form Works, Architectural shop drawings such as Door Schedule , Aluminum & Hollow Metal Door Schedule, Hardware schedule, Floor Patterns, Room Finishes Window & Door Details.
• In-Charge to design Civil works i.e. Parking & Drainage design layout, Plan & profiles of Potable & Fire water using the standard design of Royal Commission.
• In-charge to do the as-built drawings for the submission to consultants for approval.
• In charge to do the material take off from Structural, Architectural & Civil works for Invoicing and for final Table-P2.
• In-Charge to check and re-check invoices from the contractors and vendors.
• Prepares Materials and Shop Drawing Submittals.
• Involved in the tendering and Bidding preparations.

QA/QC Engineer

Fast Contracting Company P.O. BOX 5180 Jeddah 21422 K.S.A.

August 2003 - February 2004

Scope of Work :

• Ensure that the construction activities are carried out as per plan and in compliance with the standards.
• See to it that class “A” workmanship is observed.
• Perform On-Site field inspections.
• Coordinates the building ad construction section head the work progress, issues, and revisions of the on-going projects.
• Informed the contractor of any defects, abnormalities that may be found and see to it that such findings will be corrected by the said contractor.
• Prepare a checklist approved by the Project Manager to see to it the contractor complied with the contract as per plan and specifications.
• Prepare a QA/QC plan for submission to the project Manager and the consultants.
• Prepare a checklist, Conduct inspections prior to call to the consultants for final Approval of pouring concrete and submit an RFI (Request for Inspection).
• Perform the necessary test in various utilities such as water leaks test, Electrical, plumbing, sewerage, mechanical and the like before acceptance of the project.
• Do material Testing such as Density Test, Slump Test prior to pouring concrete to see the quality and integrity of the structure.
• Do the calculation and estimate to see to it that ordered concrete is just enough to finish the designated area covered with no wasted.
• Ensure the proper documentation involving QA/QC works for final turn over of the said project.
• Report Directly to the Project Manger any problems and deficiency of the site so it can be corrected as soon as possible.

Project Engineer

Philippine-Sundt Construction & Development Corporation

February 2003 - June 2003

Scope of Work :
• Project Engineer In-charge to oversee the whole operation of the Bridge Construction.
• Handle 3 General Foremen for concreting, formworks, rebar, and bored pilling.
• In-charge for planning & scheduling of pouring sequence, preparing 3 week look ahead schedule and build strategy to beat the schedule.
• In-charge to coordinate and line up all the activities regarding the construction and execute it on the field.
• In-charge to oversee the safety of my people, quality of work , production.
• Coordinate with the consultants and conduct weekly meeting for issues and problems encounter during the phase of the constructions.
• Lias with the sub-contractor for their billings and monitor them for their progress.

Site Superintendent

Raytheon Ebasco Overseas Ltd / Washington International

October 1999 - September 2002

Scope of Work :
• Acting as a General local superintendent overseeing the operation of the Spillway of the Dam starting from Ogee Piers, Right Training walls Spillway Bridge, Downstream Chute Slabs using GOMACO machine for paving, Aeration galleries, Flip Bucket & Wing Walls.
• In-charge for at least 350-400 manpower with 6 General Foremen, Foremen down to skilled workers and laborer, Materials & equipments.
• In-charge for building & designing structural formworks using RMD form, VERSI form & and Form Apply.
• In-charge for planning & scheduling of pouring sequence, preparing 3 week look ahead schedule and help build strategy to beat the schedule.
• In-charge to coordinate and line up all the activities regarding the construction and execute it on the field.
• In-charge to oversee the safety of my people, quality of work and production.
• Report directly and received instructions from the Ex-pat superintendent In-charge.

GOLFORCE INTERNATIONAL

GOLFORCE INTERNATIONAL

May 1999 - October 1999

Scope of Work :
• In–charge of the slope stabilization and erosion control measure for the construction of the San Roque Multi-Purpose Project. Working as a contractor to Raytheon Ebasco Overseas Ltd.
• In-charge of Road Elevation 165 upstream side of the Main Dam to be used as Hauling road and a diversion of water for proper drainage while the construction of Copper Dam is on going.
• In-charge of all the Buttress Fill around the Operators Village to stabilized the slope with 6-8m 90% compaction fill from the toe of the slope up to the top of the slope.
• Transferred to Spillway of the Dam to In-charge Excavation including the 5m widths of Drainage benches in preparation for the construction of the whole Spillway.

Site Manager

Fil-Estate Golf & Development Inc.

May 1999 - October 1999

Scope of Work :
• Duties and responsibilities were to oversee and manage the whole operation of the Golf Course construction.
• Prepares the whole budget of the project. Setup Logistics, Materials, manpower & Equipments needed to finish up the project.
• Handles the Hiring/Firing of manpower and sub-contractors.
• Handles about 250-300 / 25-30 Manpower and Heavy Equipment respectively.
• To see to it that the project would be done on forecasted target of schedule and properly implemented.
• Report directly to the Project Manager In-charge.

Site Superintendent

Fil-Estate Golf & Development Inc.

September 1996 - December 1998

Scope of Work :
• Responsible for the whole operation in controlling and managing the distribution of manpower, materials and equipments.
• Responsible for the interpretation of the plans in relation to the actual grading and shaping of the different features of the Golf Course.
• In-charge of all rough and fine shaping stage up to the finishing touches of the golf course construction.
• Assist all foreign and local shapers in implementing procedures in the construction.
• In-Charge of the cost & budget scheduling.
• Handles about 250-300 / 25-30 Manpower and Heavy Equipment respectively.
• Report directly to Site Manager and the Project Manager.

Autocad Supervisor

Fil-Estate Golf & Development Inc.

November 1995 - August 1996

Scope of Work :
• Supervised the preparation of as-built plans based on the survey data, using ADMS, and GPS instruments.
• Supervised the preparation of the topographic map and plans using AutoCAD release 12 software’s attached to a third party software’s to generate contours, volume computations, profile, cross sections, cut and fill computations.
• Supervised the preparation of the site development plans, 3 dimensional view slope and elevation analysis, and using AutoCAD civil software for Cogo and digital terrain modeling.
• Assist all consultants, top management in all cad operations, such as digitizing plans, and data encoding.
• Performs computerized cost, materials and labor estimates.
• Performs other related duties as maybe assigned by the senior supervisors, project and site manager, consultants and the top management level.
• Reports directly to the senior supervisor.

Autocad Engineer

Fil-Estate Golf & Development Inc.

September 1994 - October 1995

Scope of Work :
• Prepares as-built plans based on the survey data, using ADM and GPS instruments.
• Prepares topographic map and plans using AUTOCADD release 12 software’s attached to a third party software’s to generate contours, volume computations, profiles, cross section, and even cut and fill computations.
• Prepares site development plans, land use plans, 3 dimensional view, slope and elevation analysis using AUTOCADD civil software for COGO and Digital Terrain Modeling.
• Performs computerized cost, materials and labor estimates.
• Performs other related duties, as maybe assigned by the supervisors, project and site manager, consultants, and the top management level.

Survey Chief

DMI CONSULTANTS INC.

September 1990 - September 1994

Scope of Work :

• Topographic survey, cross section and profile of tanguay-yabel river at sta. Rita olongapo zambales. The result must be submitted to DPWH planning and design of the proposed engineering inventions for the control and mitigation caused and damaged by lahars eruption of mt. Pinatubo.
• Conducting road parcellary and responsible for the consolidation and encoding of all survey data for the proposed road right of way using Micro Soft Word & Excel for windows 3.1x.
• Conducts survey and design of all the rehabilitation roads for Metro Manila Project
• Quantity Surveyor involved in the design analysis, quantity take/off and Bill of materials.
• Establishing Horizontal & Vertical Controls
• Prepares Lot Data Computations, to be submitted to Bureau of Lands.
• Prepares area computations, monument and preparation of Lot Plans, Technical Descriptions, and consolidation of boundaries.
• Instrument man responsible for the layout of the Horizontal and Vertical control references for the design and construction.
• Conduct Cross-Section and Profiles, Established Horizontal and vertical controls reference for the construction.
• Plotting of Horizontal and Vertical plans, Profile & Cross-sections, to be submitted to client for the design of the project.

Qualifications & Certifications

Degree in bachelor of Science in Civil Engineering

University of Mindanao (UM Davao)

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Supported Countries
Choose your country

×