I am the first Mechanical Design Engineer to be nominated as a Sr. Mechanical Design and Reliabiity Specialist within the Refinery Isla Curacao (Filliate of PDVSA).
Several years I was Honored as the best Engineer within the Refinery. This did also happened for the first time ever. At this point in time I am busy with my 3rd book, namely. 120 ways to boost the productivity in all Businesses. My Engineering knowledge have saved millions of Dollars yearly for the Refinery Isla Curacao.
I did also solved the vibration problem that were present in the larges Flexi-Coker in the world which is in Punto Fiho Venezuela.
The Vibration that was present in their De-lay Coker was also take
care very quickly.


Heavy Lift Engineer, Lift Engineer,Sr. Mechanical Design And Reliability Specialist,Sr. Vibration En


Dear"Mam/Sir. Please be informed that I been a Sr. Mechanical Design and Reliability Specialist for over 25 years. The above-mentioned job is a combination of the following section jobs, namely. Heavy lift Engineer/Sr. Dynamic & Static Vibration Specialist.Sr./lead/Principal Piping Design Engineer./Sr./Lead/Principal Strucctural Design Engineer./Chief of Engineering./Sr. Heavy Lift manager.Chief engineer(Static Engineering)Chief Field Engineer.

Work History

Owner/Ceo and Director of Penniston Global Consulting B.V

Hoisting and Transport Plans

Provided Repair Procedures including technical support for the repair of the Floating Pontoon Bridge of Curacao on multiple ocations.
Provided a Hoisting and Transport Plan for the asphalt Lake processing Plant in order to hoist and transport three pieces of oil tanks from the premises of the Refinery Isla B.V via Post #5 to the premises of the asphalt lake processing Plant.This was carried out several weeks ago on (February 2014) with lots of success.
Several hoisting and Transportation plans were carried and provided for the BOO Complex (Curacao Refinery Utility) during the past years. Related to Boiler 1,2 and 3.Boiler # 77 and 80. Brine Heater Complex.
I have also designed a complete Blocked Valve system between the Boilers 1,2 and 3 sitauted on the Premises of the Curacao Refinery Utility along with the required Hot Tapping system and Stress Analysis, piping stress analysis, iso metrics Drawings, Lay-Out Drawings, Walk-way Platform Drawings, and all required Hoisting and Transport Plans.
I have also designed the actual New Brine heater complex for the Curacao Refinery Utility incl. all supporting system, Piping stress analysis along with the required Hoisting and Transport Plans.
I have also reduced the office noise levels that was present 24/7 within the office of a bank in the Netherlands Antilles. The noise was coming from several huge airconditioning Units.
Today my Client is very very happy with my achievements.
Penniston Global Consulting B.V. is pending to receive five patents very very soon.

More Achievements.
Working at the Refinery Isla Curacao as a Sr. Mechanical Design Engineer and a
Sr. Mechanical Design Engineering Specialist and Sr. Reliability Specialist they comprises of the following sections of Mechanical Engineering Disciplines.
Such as: Sr. /Lead Piping Design Engineer, Including layout drawings in autocad
Several Isometric drawing and the Stress analysis including material list.
Sr./ Lead/Principel Mechanical Design...

Sr. Mechanical Design Specialist in Refinery related Equipments

Refinery Isla Curacao B.V

(PDVSA) Netherland Antilles.
Sr. Mechanical Design Specialist and Sr. Mechanical Reliability Specialist.

Design of replacement anchor bolts for steel structures/vessels/columns/Towers

Hoisting and Transport Plans

I have prepared all jacking plans for Oil Tanks.
Preapared procedures to assure flange alignment after jacking of Oil Tanks.
Carried Stress analysis for pipes.
Carried stress analysis for Oil Tanks.
Prepared all types of precedures.
Carried out Vibration Analysis for Static equipments.
Carried out Vibration Analysis for pipes.
Carried out Vibration Analysis for Rotating Equipments.
Carried Stress Analysis for Vessels.
Carried Stress Analysis for Towers and Columns.
Carried out Vibration Analysis for Flexi-Coker Units. (Amuy Venezuela).
Carried out Vibration Analysis for Delay cokers (Ameriven Venezuela).
Carried out Stress Analysis for Steel Structures.
Prepared repair procedures for deformed oil tanks.
Design of on/ off stream Leak Boxes.
Design of Noise Reduction Systems for Offices /Homes, Work places and Bonks.
Incident and Accident investigation Analysis.
Carried layout drawings.
Carried out Iso-metric Drawings.
Design of Scaffold Structures for scaffold above 20M.
Design of replacement anchor bolts for steel structures/vessels/columns/Towers.
Design of temporary pumps frames for replacement pumps.
Design of Speader Bars.
Design of Lifting Beams.
Design of Lifting Lugs.
Design of Trunnions.
Carry out Stress analysis in order to down grade lifting slings, Lugs, trunnions,
Spreader Bars and Lifting Beams.
Carried out Stress analysis in order to Down Grade Columns, Vessels, Drums, Columns, and much more.
I have also carried out several complicated lifting and Transport Plans for the
Curacao Drydock Company. Inc. in the past years with lots of success.

Extra ordinary achievements at the Refinery isla Curacao.
Solved huge vibration problem of an 8" crude line situated at the Refinery Isla. This 8" Crude Line had been vibrating for approx.. 20 years. Unit CD-2 A/B Complex.
Solved the vibrating problem of the 300ft Tall Flexi-Coker situated at the Amuy Refinery in Venezuela.This vibration had been on going for 10 years.
Solved huge vibration prolem related to...

Sr. Mechanical Design Engineer and Sr. Project Coordinator

HCG. Hollandsche Constructie Groep

related to Noise Reduction Systems, such as Gasturbines, Diesel Engines, Pumps, Boilers, Road Traffic fences, and much more. (1980-1988).

HCG. Hollandsche Constructie Groep.

Design Engineer


Neitraco B.V. Utrecht Holland.
Worked as a Mechanical Designer designing Roll on Roll off ship decks for Mc Greggor ship Yard of England. (1978-1980).
Related to huge ships that were transporting cars from Japan to Europe.
I was also sent to Sweden for several months in order to carry out the above-mentioned Design Work.
Gresel B.V. Spijkenisse, Holland.

Metal worker

G.Heemskerk B.V

I have worked at Pacton Rolando B.V. Utrecht, Holland building cement and fuel Trucks from (1972-1975).

Qualifications & Certifications

Bachelarof Sc. in Mechanical Design engineering.

HTS of the Wega Straat Den haag Netherlands.

I went to the LTS and MTS on the Island of Aruba

Skillpages has been acquired by! is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Are you sure that you want to leave?