Services

PDMS V-11.6 , Mds, KMS, Review Model 6.2 ,Autocad, Staad-Prov8i

Summary:

Modelling of Piping Support & Draft using PDMS(KMS) support utility. Support calculation using Staad Pro.Reviewing of 3D model, providing feed engineering, Modelling of equipment & piping, modelling of pipe supports,Clash report generation and resolving the same. Interface with other disciplines for 3D activities.Coordinate with other engineering groups for interface requirement.

Work History

Nuclear Power corporation

of India - 550 Mw and 750 Mw Power Plant
Mumbai, India
Capacity: 550Mw and 750Mw
Location: Tarapur Atomic power station, India
Engineered using PDMS and Autocad
Responsibility: Designer

Designer

Swastik Heavy Structurals Pvt. Ltd

Seto Teknolog Pvt. Ltd

Mumbai, India
Responsibility: Draftman
Date of Issue: 15 March 2010
Date of Expiry: 14 March 2020
Contact no.: 0091-9619344014

Projects

Edvard Grieg EPC Topside Project (Offshore Platform)

Scope : Pipe Support activity for Utility module (U00 & C00).
Main Client :Lundin
Location : North Sea, Norway
Engineered using 3D PDMS(KMS), Staad-ProV8i
Responsibility : Support engineer

MMO (Visund - Offshore Platform)

Scope : Pipe Support activity for J085 - Visund Nord & J002 - Kitchen Ramp.
Main Client :Statoil Hydro
Location : North Sea, Norway
Engineered using 3D PDMS, Support 1.2
Responsibility: Support engineer

MMO (Asgard-B - Offshore Platform)

Scope : M026 - Pipe Support activity of Drainage system for the Tote tank area..
Main Client :Statoil Hydro
Location : North Sea, Norway
Engineered using 3D PDMS, Support 1.2
Responsibility: Support engineer

MMO (Gudrun - Offshore Platform)

Scope : Pipe Support activity for G28 Task
Main Client :Statoil Hydro
Location : North Sea, Norway
Engineered using 3D PDMS, Support 1.2
Responsibility: Support engineer

MMO (Gullfaks C - Offshore Platform)

Scope : Replacement of UV Sterilizer
Main Client :Statoil Hydro
Location : North Sea, Norway
Engineered using 3D PDMS, Support 1.2
Responsibility: Support engineer

Nagarjuna Oil Corpn Ltd – CDU/VDU Unit

Process Licensor: CB&I
Capacity : 6.00 MM TPA
Location : Cuddalore, India
Engineered using 3D PDMS
Responsibility : EPCM Engineer

Essar Engg. Service Limited - DCU Delayed Coker Unit

Process Licensor: CB&I
Capacity : 6.00 MM TPA
Location : Vadinar, Jamnagar, India
Engineered using 3D PDMS, Review Model 6.2
Responsibility : Layout Engineer

Hindustan Unilever Ltd - CLS Plant Unit-

Process Licensor: Unilever
Capacity : 41630 TPA
Location : Uttarakhand,India
Engineered using 3D PDMS
Responsibility : Design Engineer

Biocnergy Europa B.V. - Vivergo Fuel Project

Process Licensor: Praj Industries Ltd.
Capacity : 320,000Tons
Location : Hull UK.
Engineered using 3D PDMS
Responsibility : Design Engineer

L&T – Maersk Oil Qatar - Field Development

Capacity :2 well head platforms(HA and IA) with one platform connecting to flare platform
HA Platofrm : maximum gas flow rate of 80 MMSCFD, maximum oil flow rate of 125000 bbld and 120000 bbld of maximum water flow rate.
IA platform : maximum gas flow rate of 50 MMSCFD, maximum oil flow rate of 75000 bbld and 70000 bbld of maximum water flow rate.
Location : Al Shaheen, Qatar.
Engineered using 3D PDMS
Responsibility : Design Engineer

Qualifications & Certifications

Mechanical Engineering

K.J. Somaiya Polytechnic

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?