Mustaffa - PDMS Piping & Equipment Modelling - Kuala Lumpur, Federal Territory of Kuala Lumpur, Malaysia

Khairul Hisham Mustaffa

Kuala Lumpur, Federal Territory of Kuala Lumpur, Malaysia

Services

PDMS Piping & Equipment Modelling

Work History

DEVELOPMENT PROJECT

RANHILL WORLEY

Do a checking and mark-up on vendor drawing to suite with layout, other
PARSONS
parties (mechanical/electrical/instrument) and PDMS Model.
• To handle PDMS Model review at MMHE Pasir Gudang between client,
Project:
fabricator and vendor.
DETAILED DESIGN FOR
• Piping and Equipment modelling
F14 & F29 FIELD
• Pipe support modeling using MDS
DEVELOPMENT PROJECT.
• Check & review detail design before issued to client for fabrication
PROVISION OF DETAILED
• Ensure all the special items were in the model as per P&ID.
ENGG. DESIGN SERVICES
• Liaise with all discipline for inter department check
FOR BUNGA RAYA & • Produced Piping GA and Pipe Support Detail using Draft application
BUNGA ORCHID.
• Ensure all the special items were in the model as per P&ID
TAPIS EOR
• Check Client (AFC) drawings in accordance with the standard technical
REJUVENATION PROJECT
specification and scope of work
• Prepare for pipe support locations & details
Client:
SARAWAK SHELL BERHAD • Perform site survey and stringing to gather data & information needed at
TALISMAN ENERGY Talisman Platform (Bunga Orkid) and Shell platform (F23RA).
EXXON MOBIL


Post:
PDMS DESIGNER

ANGSI Development Project (ANGSI-A)

SAMARANG REDEVELOPMENT PHASE

2 PROJECT
BHD. • SAMARANG KECHIL-A Provision of Remote Control and
Monitoring.
Post: • ANGSI Development Project (ANGSI-A)-(Phase IV).
PDMS DESIGNER • Carigali HESS-(Provision & Technical Services)
• PCSB - PC4 @ B11 Host Tie-In
• EPCC JABUNG-INDONESIA
• EPCC OF J4 - (Detailed design)


Job Description:-
• Seconded to Jambi Indonesia for 3 month (Project EPCC Jabung)
• Prepare for general piping arrangement and isometric for installation and removal drawings
Curriculum Vitae KHAIRUL HISHAM 3 / 5


• Prepare for Tie-In Index
• Check and review detail design before issued to client for fabrication
• Liaise and co-ordinate with relevant discipline engineers and designers, and clients on design to hinder any potential problems
i.e. Inter-discipline clashes etc.Prepare equipment layout.
• Responsible for all piping dwg. Involving new & existing
modification of piping installation.
• Perform site survey and stringing to gather data & information
needed to facilate Conceptual and Detail Design at offshore and onshore (ALL CHESS platform-Kelantan, MCOT, D-35, B11-MIRI,
SAMARANG KECIK-SABAH, EPCC JABUNG-INDONESIA,
SHELL REFINARY PORT DICKSON, TCOT KERTEH)
• Identify & verify tie-in points.
• Identify & verify pipe routing.

SNR. PIPING DRAFTER

PLANT & OFFSHORE

Prepare G.A piping plan refer to P&ID & piping spec.
TECHNOLOGY S.B • Make section view from G.A, P&ID, spec & equipment.
• Prepare isometric piping dwg.
Project: • Sketch isometric piping dwg.
BITUMEN KEMAMAN • Prepare MTO
REFINERY
TIPP POLYSTER PLANT
EXPANSION


Client:
TOYO ENGG.
Post:
SNR. PIPING DRAFTER
Curriculum Vitae KHAIRUL HISHAM 4 / 5


Job Description:-

SNR. PIPING DRAFTER

SIME SEMBAWANG

Isometri piping dwg
• Prepare pipe-support detail dwg

Project: • Check from data base with piping specification.

D1 WELLHEAD & WATER • Prepare shop & fabrication dwg.
INJECTION PLATFORM, • Prepare of piping plan & pipe specification.
AMENAM/KPONO OIL & • Prepare as-built dwg.
GAS EXPORT PROJECT • Prepare location & marking for Mechanical Equipment base plate
PH2 at site such as for Chemical Dosin, Fine Filter DC Skid.
TOPSIDE COMPRESSOR • Arrange for printing & distribution of dwg for proposal.
AMP1/AMP2 • Prepare dwg for hodrotest package (isometric dwg)
• Prepare for Piping ShipLoose
Post: • Monitor & update status of dwg.
SNR. PIPING DRAFTER • Any other duties as ordered by management.


Job Description:-

Piping Draughtsman

MGI MEDICAL SERVICES

January 1998 - February 2003

Produced shop dwg detail for fabrication

ENGG. (M) SDN. BHD. • Prepare for Isometri piping dwg.
• Revise G.A Plan Layout.

Project: • Do equipment detail dwg for site installation.

Serdang Hospital • Prepare equipment detail dwg.
Alor Setar Hospital, • Do Operating Theater Plan Layout.
Kuantan ACC • Do Operating Theater Detail dwg.
Hospital
Sg.Petani Hospital
Ampang Hospital


Post:
Piping Draughtsman
Curriculum Vitae KHAIRUL HISHAM 5 / 5


Job Description:-

Draughtsman

ACTIVE VINTAGE (M) SDN

June 1995 - December 1997

BHD. • Prepare machine spare part.
• Do dwg detail for tools & die (Hot Forging).

Post: • Make detail dwg for stamping die.

Draughtsman • Do detail dwg of Bolt & Nut according to JIS standard.

Projects

DETAILED DESIGN FOR F14 & F29 FIELD DEVELOPMENT PROJECT

• Responsibility for F14 & F29 Vendor Data Incorporation (VDI)
• Do a checking and mark-up on vendor drawing to suite with layout, other parties (mechanical/electrical/instrument) and PDMS Model.
• To handle PDMS Model review at MMHE Pasir Gudang between client, fabricator and vendor.
• Piping and Equipment modelling
• Pipe support modeling using MDS
• Check & review detail design before issued to client for fabrication
• Ensure all the special items were in the model as per P&ID.
• Liaise with all discipline for inter department check
• Produced Piping GA and Pipe Support Detail using Draft application
• Ensure all the special items were in the model as per P&ID
• Check Client (AFC) drawings in accordance with the standard technical specification and scope of work
• Prepare for pipe support locations & details
• Perform site survey and stringing to gather data & information needed

Qualifications & Certifications

Mechanical Drafting

Institute Kemahiran MARA

Skillpages has been acquired by Bark.com!

Bark.com is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more


Are you sure that you want to leave?

   
Supported Countries
Choose your country

×