Dethan - Inst.Commissioning Engineer - Thiruvananthapuram, KL, India

Kgc Dethan

Thiruvananthapuram, KL, India


Inst.Commissioning Engineer



Work History

I.T.I Instructor

Industrial Training Institute


Inst.Commissioning Supervisor


January 2012 - June 2013

My responsibility in Adco Babb Tammama G Commissioning of Well head Control panels PLC &RTU Instruments in time. Major S/D jobs and Hook up activities, performing Operational Tests in pre- startup on various systems and Sub systems
In onshore Oilfield development project at Habshan, Abu Dhabi.

Electronics and Instrument Technician

International Engg. and Marine Works


Electronics & Instrument Technician

Department of Atomic Energy, Govt. of India


I&C Field Engineer


August 2010 - December 2011

3 Units of Combined Cycle Power Plants and Multi Stage Flash Desalination Plants COMMISSIONING jobs and hands on experience in Calibration and all other turn around jobs in Shuiba North Plant Power& Desalination PROJECT in Kuwait.

Instrument & Control Technician

Water and Electricity Department

Worked in WED's (Water and Electricity Department) Abu Dhabi Al-Taweelah -B Project. My responsibilities included commissioning of 6 X 120MW units Combustion Boilers, Feed Pumps and flue gas system. The entire plant is controlled by H&B's Contronic 3-I Control system. Commissioning of HVAC System with the Client.

10) EMPLOYER: Sharjah Water and Electricity Department. U.A.E
POSITION: Instrument & Control Technician

I&C Commissioning Engineer


July 2009 - May 2010


I&C Commissioning Engineer

June 2008 - June 2009

for the Commissioning of the QEWC RAS ABUFONTAS A1 PROJECT in DOHA. Plant is designed for MSFE 3 x 15 MIGD Water, 3 HRSG, Auxiliary Boiler, 11KV, 3.3 KV , 415 Switchgear units,. Auxiliary Plants such as Electro-Chlorination Plant, Remineralization plant, Potable water Export system, BMS, CEMS, Gas reducing station and Gas Metering station. The QEWC RAS ABUFONTAS B2 PROJECT in DOHA The project package containing two Heat Recovery Steam Generators, one Dump Condenser, 2 x 15 MIGD MSF Desalination units with auxiliary plants of Remineralization Plant, a Potable Water Storage and Pumping Station, Electro chlorination plant and relevant auxiliaries.

4) EMPLOYER: CTJV-Technip, Qatar
POSITION: Inst. Supervisor
PERIOD: 7th June 2008 to 25th June 2009


Gasco, Abu Dhabi

August 2003 - April 2008

During this period I have been actively involved in all faces of project, Pre- commissioning, Loop checking, commissioning and Hook up activities, performing Operational Tests in pre start-up on various types of process control instruments associated with control systems in FIELD FOUNDATION DCS in Qatar Gas Project.

5) EMPLOYER: Gasco, Abu Dhabi
POSITION: I & C Maint. Foreman
PERIOD: 25th August 2003 to 30th April 2008

I involved in Periodical maintenance with production Team, fault finding and Hook up activities, performing Operational Tests in pre start-up on various types of process control instruments associated with control system's (DCS, ESD, F&G) Involved AGD-1 Plant Shunt Down Jobs and Upgrading the Units.

I & C Maint. Foreman


rd June.

During this period I have been actively involved in all faces of maintenance jobs and preventive maintenance and then periodical maintenance take care in time. Majors/D jobs and Hook up activities, performing Operational Tests in pre- startup on various
Types of process control instruments associated with control systems (DCS, ESD, and F&G)

E & I Commissioning Foreman

Total Fina Elf

August 2001 - January 2002


I & C Commissioning Foreman

ABB Sae Sadelmi

February 1997 - June 2001

Working with Total south pars (TSP) Field development well heads plat form WP1 & WP2. Job assignment includes commissioning of CENTUM 3000 DCS, Rose mount smart transmitters and control valves. PLC S7 for compressor system. Field equipment and systems witnessing for client side. Also involved in hook-up, pre start-up with the production team.

8) EMPLOYER: ABB Sae Sadelmi, Milan, Italy.
POSITION: I & C Commissioning Foreman
PERIOD: 2nd February 1997 to June 2001

Worked for TREC's (Tehran Regional Electric Company) Ghom Combine Cycle Power Plant for Commissioning of Auxiliary & Heat Recovery Steam Generators (H.R.S.G) Water treatment plant and Utilities.
Job assignment includes commissioning of Water treatment Plant working with MODICON 785E PLC & SCIMATIC S5 PLC, H.R.S.G and other utilities
Controlled by ABB Procontrol P14 DCS and various water and steam analyzers of ABB Kent Taylor. Commissioning of HVAC with latest control systems. Witnessing the systems with client and job distribution to technicians.

I & C Commissioning Engineer

ABB Sae Sadelmi

February 1996 - January 1997



Steam Turbine and Desalination plant

September 1987 - November 1995

Duties included maintenance, repairs, Calibration and installation sophisticated Electronic and Pneumatic Control equipment and Instruments in Power station, Gas Turbine, Steam Turbine and Desalination plant. I participate in modification of
Control logic of Leeds and Northrop (L&N) Hartmann & Braun control system. Fault finding GT Speedtronic mark-IV control system. Calibration and periodical maintenance of Water and steam Analytical instruments. Calibration and maintenance Gas and Fire detection system and Public addressing System.


Indira Gandhi Center for Atomic Research

October 1984 - August 1987

Kalpakkam in Fast Breeder Test Reactor I&M / ROD (Instrument and maintenance Reactor Operating Division). Repairs, Test and calibration of Electronic equipment and Instruments. Maintenance of telephone and public addressing system.


Oil & Natural Gas Commission

September 1982 - August 1984

exploration and processing company, for Maintenance contract of Oil and Gas Processing/Refinery complex (Crude stabilization unit, LPG-NGL & C2-C3 recovery units) at Uran.
Job assignment included maintenance of control room Instruments, Repairing of Electronics Controllers, Recorders, Indicators, Alarm cards, mV/mA Converters and Totalizers. Calibration and Loop checking of all types of instruments includes Boilers, Gas Turbines, and all other process area.

Teaching Theory and Practical classes for Radio and Television Mechanic

Industrial Training Institute

September 1979 - September 1980

at Paravur Quilon District.

Able to work with MS windows based applications. Well-verse in P&I Drawings, Relay Logic, Ladder logic, interprets location drawing and Hook-up Drawings.

DCS & CONTROL SYSTEM: Hartmann & Braun Contronic 3-I Control System, Pneumatic Control Systems, Pneumatic and Hydraulic Shutdown Panels of Autocon & Baker, CAC , Taylor Mod-30 controller and Yokogava Centum 3000.Field Foundation system ( FFS DCS ) &Ovaetion DCS by Emersion.

TRANSMITTERS: Smart Transmitters of Rosemount with 268
Hart calibrator, Bailey with STT02E terminal,
Hartmann & Braun Intelligent Temperature, Flow and Pressure

Transmitters, and Fisher, Taylor, ABB Kent, Foxboro, Bells, Yokogawa and Masoneilan.

SWITCHES: Switches of Versa, Delta, Bailey,
Donfoss, Ashcroft, Sor, KDG Mobery, Baker CAC, Sirco, Mercoid andCella.

CONTROLLERS, RECORDERS: Electronics & Pneumatic controllers
Of Taylor, Fisher, Kent, Foxboro, Honeywell, Yokogawa, Hartman & Braun, Leeds & Northrup and Instrumentation India Ltd.

CONTROL VALVES: Fisher, Yamatake-Honeywell, Mesoneilan,
Motorized Linear Actuators of Hartmann
& Braun, MOV's of Biffi, Auma and Rotork.

FLOW INSTRUMENTS: Flow Computers of Daniel,
Bopp & Reuter and Smith Turbine
P.D. meters of Smith and EG & C Process Measurement. Magnetic Flow meters of ABB Kent-Taylor.

FIRE & GAS DETECTORS: H2S & HC Detectors of General
Monitors, Detection Instruments,
Sti, Siegers, and Analytical Instruments. Fire Detectors (UV & IR) and Controllers of Detronics.

HVAC SYSTEM: Control Panel Loop Checking& System
Commissioning and witnessed the system with the Client.

Place: Trivandrum,
Date: 18- 09- 2013 K.G.Chandradethan.

Qualifications & Certifications




Skillpages has been acquired by! is pioneering the way people find local services. Skillpages is the world’s premier directory of service providers.

Find out more

Supported Countries
Choose your country