Be Studio Interiors

Design and space planning
Planning permission
Building regulations
Insulation and damp proofing
Plumbing and wiring
Flooring
Walls
Windows and doors

Loft Conversion Assessment
The features that will decide the suitability of the roof space for a loft conversion are the available head height, the pitch and the type of structure, as well as any obstacles such as water tanks or chimney stacks. An inspection of the roof space will reveal its structure and physical dimensions.

Head Height
Take a measurement from the bottom of the ridge timber to the top of the ceiling joist; the useable part of the roof should be greater than 2.2m.

If you have appointed an architect or designer, invite them to illustrate clearly how much headroom there will be across the floor in the finished space. Some people are disappointed by how much standing space they actually have, and this isn’t always conveyed on plans.

The Building Regulations impose no minimum ceiling height for habitable rooms. The headroom standard for stairs of 2m applies, but this can be relaxed to 1.9m or 1.8m on the edge of a stair if necessary.

Water Tank
Without the roof space for water tanks and plumbing, the heating and hot water system may have to be replaced with a sealed system. Unvented hot water cylinders make a better choice than replacing the boiler with a combi (combination) boiler but they do take up a cupboard-sized room, which you will have to find space and budget for.

Pitch Angle
The higher the pitch angle, the higher the central head height is likely to be, and if dormers are used or the roof is redesigned, the floor area can be increased.

Type of Roof Structure
Two main structures are used for roof construction — namely traditional framed type and truss section type. The traditional framed type is typically found in pre-1960s houses where the rafters and ceiling joists, together with supporting timbers, are cut to size on site and assembled. This type of structure has more structural input, so is often the most suitable type for attic conversions. The space can be easily, and relatively inexpensively, opened up by strengthening the rafters and adding supports as specified by a structural engineer.

Post 1960s, the most popular form of construction used factory-made roof trusses. These utilise thinner – and therefore cheaper timbers – but have structural integrity by the addition of braced diagonal timbers. They allow a house roof to be erected and felted in a day. However, this type of truss suggests that there are no loadbearing structures beneath, and so opening up the space requires a greater added structural input.

This will normally involve the insertion of steel beams between loadbearing walls for the new floor joists to hang on and the rafter section to be supported on — together with a steel beam at the ridge. This added structural input requires skill, knowledge and equipment that would limit scope as far as DIY is concerned — and a far greater cash outlay. It is advisable to seek advice from specialist firms in this instance.

Yes – all loft conversions need Buildings Regulation approval, regardless of whether planning permission is needed or not. A building control surveyor will inspect your work at various stages and will issue you with a completion certificate on final inspection.

If your home is semi-detached or terraced, you’ll need to notify your neighbour of your proposals if the works fall under the Party Wall Act requirements. For instance, if you are building in beams which will bear on the party wall(s).

Most important step for us to start interior design process is to understand the needs, requirements and ideas of the client.

Briefing- Programming: After detailed analysis and some questions to the client we define the scope of work and inform you about the services that you may require from us. We consult with the design, planning and construction administrations phases.

Concept Design: From here we start to develop the design and put together drawings along with mood boards and 3D renderings. When we are ready, we come together with the client to discuss the concept design. We do revisions until the client is happy with the project.

Developed Design: After your approval on the final design, the next step is producing the construction drawings. We prepare all the necessary drawings for the contractors to understand all the details of the work accurately.

Construction Phase: After bidding is completed and contractor has been awarded for the job we do construction meetings with the GC and the subcontractors regularly. We do site visits as needed to ensure work is progressing as planned.

Contemporary, Modern, Mid century modern, Industrial, Nautical, Scandinavian, Bohemian

Help people achieve their dreams to live in a better space. Architecture is always full of challenges, we love solving the problems with creativity.

Last 10 years, we have worked with award winning design companies and completed more than £1B worth projects. Now, it is time to create our own identity and reflect our experience with our own rule.

We are young and energetic firm with an experience of more than 15 years. We worked on broad range of projects at every phases in UK and abroad. Our past experience counts hospitality, commercial and residential projects in New York City, Istanbul, Izmir and Tripoli.

We have adapted our services to be provided online or remotely, ensuring convenience and safety for our clients. Through the use of technology and virtual communication tools, we have successfully transitioned to a remote working model. Here are the details of how we can deliver our services remotely:

1. Virtual Consultations: We offer initial consultations via video conferencing platforms, allowing us to discuss your project requirements, design preferences, and goals. This virtual meeting enables us to understand your vision and gather essential information without the need for an in-person meeting.

2. Design Presentations: Using advanced design software, we create 2D and 3D visualizations of your space and develop detailed design proposals. These designs are then presented to you remotely through video calls, screen sharing, or email. We provide a comprehensive walkthrough of the design concepts, materials, colors, and furniture selections, ensuring you have a clear understanding of the proposed vision.

3. Mood Boards and Sample Selection: We curate mood boards and material samples tailored to your project, taking into account your preferences and style. These mood boards, along with physical samples, can be shipped directly to your doorstep, allowing you to visualize and experience the proposed materials remotely.

4. Collaboration and Feedback: We encourage active collaboration and value your input throughout the design process. Through online communication channels, such as email, video calls, or project management software, we ensure seamless interaction and prompt response to your feedback, questions, and concerns.

5. Vendor Coordination: As part of our remote services, we handle the coordination with suppliers, contractors, and vendors on your behalf. We communicate with them through digital platforms, ensuring the seamless execution of your project while maintaining a high level of quality.

6. Final Documentation and Deliverables: Once the design is finalized, we prepare detailed documentation, including floor plans, elevation drawings, material specifications, and any necessary construction documents. These deliverables are shared with you electronically, ensuring accessibility and ease of use.

7. Remote Project Monitoring: In cases where on-site work is required, we can remotely monitor the progress of the project through video calls, photo updates, and collaboration with contractors. This allows us to ensure that the design is implemented correctly, adhering to our standards and your vision.

By offering these remote services, we aim to provide you with the same level of dedication, creativity, and professionalism as we would in an in-person setting. Our team is well-equipped to guide you through the entire design process, from conceptualization to execution, all while ensuring your safety and convenience.

At our organization, ensuring the safety and well-being of our customers has been our utmost priority during the ongoing COVID-19 pandemic. We have implemented a range of measures and made significant changes to our operations to minimize the risk of transmission and provide a safe environment for everyone involved. Here are some of the steps we have taken:

1. Enhanced Sanitization: We have increased the frequency and intensity of our cleaning and sanitization protocols. High-touch areas and surfaces are regularly disinfected using recommended cleaning agents to maintain a clean environment.

2. Social Distancing: We have implemented measures to encourage and facilitate social distancing among our customers. This includes rearranging furniture and spacing out queues or waiting areas to ensure appropriate distancing guidelines are followed.

3. Mandatory Face Coverings: We have made it mandatory for all staff and customers to wear face coverings while on our premises. This policy helps reduce the risk of transmission, especially in situations where maintaining physical distance may be challenging.

4. Hand Hygiene: Hand sanitizing stations have been placed strategically throughout our facilities to encourage regular hand hygiene among customers and staff. We have also ensured an adequate supply of soap and water in restrooms for thorough handwashing.

5. Staff Training and Screening: Our employees have received comprehensive training on COVID-19 safety protocols, including proper hand hygiene, respiratory etiquette, and recognizing symptoms. We conduct regular health screenings and temperature checks to ensure the well-being of our staff.

6. Contactless Options: We have introduced contactless payment systems and digital platforms to minimize physical contact between customers and staff. Online ordering, delivery, or curbside pickup options have been implemented to provide a convenient and safer experience.

7. Communication and Signage: Clear and prominent signage is displayed throughout our premises to remind customers about safety measures, including social distancing, face coverings, and hand hygiene. We also regularly communicate updates and guidelines through various channels to keep customers informed.

8. Capacity Limitations: We closely monitor and limit the number of customers allowed in our premises to avoid overcrowding and maintain proper distancing. This may include implementing reservation systems or time slots to manage customer flow effectively.

9. Health Monitoring: We encourage customers to stay home if they are feeling unwell or have been in contact with someone diagnosed with COVID-19. We also request customers to adhere to local health guidelines and regulations when visiting our premises.

10. Continuous Evaluation and Adaptation: We continuously monitor the evolving situation and stay updated on health guidelines and recommendations. We adapt our safety measures accordingly to ensure we are following the best practices for customer safety.

These measures collectively reflect our commitment to prioritizing the safety of our customers and providing them with a secure environment during these challenging times. We understand the importance of mitigating the risks associated with COVID-19 and remain dedicated to maintaining a high standard of safety for everyone involved.